Cited by 2,911High Entropy Alloys StudiesIntermetallics and Advanced Alloy PropertiesMetallic Glasses and Amorphous Alloys

The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Guo, Sheng, Ng, Chun, Lu, Jian, Liu, C. T.·2011·Journal of Applied Physics

DOI 10.1063/1.3587228

Open this paper in CoChat — free account

Abstract

Phase stability is an important topic for high entropy alloys (HEAs), but the understanding to it is very limited. The capability to predict phase stability from fundamental properties of constituent elements would benefit the alloy design greatly. The relationship between phase stability and physicochemical/thermodynamic properties of alloying components in HEAs was studied systematically. The mixing enthalpy is found to be the key factor controlling the formation of solid solutions or compounds. The stability of fcc and bcc solid solutions is well delineated by the valance electron concentration (VEC). The revealing of the effect of the VEC on the phase stability is vitally important for alloy design and for controlling the mechanical behavior of HEAs.

Integrity signals

Registry

Crossref · 10.1063/1.3587228

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,215
Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element
Takeuchi, A., & Inoue, A. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2817 · Cited by 4,976
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,255
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,971
Recent progress in high-entropy alloys
Yeh, J. (2006) · European Journal of Control · doi:10.3166/acsm.31.633-648 · Cited by 2,144
Microstructure characterization of Alx CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C. H., Chen, Y., Yeh, J., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,242
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
Takeuchi, A., & Inoue, A. (2000) · Materials Transactions JIM · doi:10.2320/matertrans1989.41.1372 · Cited by 888
Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
Wang, X. F., Zhang, Y., Qiao, Y., & Chen, G. L. (2006) · Intermetallics · doi:10.1016/j.intermet.2006.08.005 · Cited by 721
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 630
Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys
Senkov, O. N., & Miracle, D. B. (2001) · Materials Research Bulletin · doi:10.1016/s0025-5408(01)00715-2 · Cited by 583

Flagged first, then by citations

Show all 28 references

1 of the 28 references couldn’t be matched to a known paper.

Research works printed but not linked: 3

2008, Adv. Eng. Mater., 10, 534, 10.1002/adem.v10:6 · DOI
1996, Physical Metallurgy
1984, Inter. Met. Rev., 29, 168

Sorted by citations

Items 301–400 of 1,004

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition
Huang, L., Sun, Y., Amar, A., Wu, C., Liu, X., Le, G., Wang, X., Wu, J., Li, K., Jiang, C., et al. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109875 · Cited by 104
RETRACTED: Exploring high entropy alloys: A review on thermodynamic design and computational modeling strategies for advanced materials applications
Odetola, P. I., Babalola, B. J., Afolabi, A. E., Anamu, U. S., Olorundaisi, E., Umba, M. C., Phahlane, T. A., Ayodele, O. O., & Olubambi, P. A. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e39660 · Cited by 110
Retracted
Phase evolution, microstructure, and mechanical behaviors of the CrFeNiAlxTiy medium-entropy alloys
Zhang, M., Ma, Y., Dong, W., Liu, X., Lu, Y., Zhang, Y., Li, R., Wang, Y., Yu, P., Gao, Y., et al. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138566 · Cited by 103
Microstructure and mechanical behaviors of GdxCoCrCuFeNi high-entropy alloys
Zhang, L. J., Yu, P., Zhang, M. D., Liu, D. J., Zhou, Z., Ma, M., Liaw, P. K., Li, G., & Liu, R. P. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.09.102 · Cited by 102
Current and emerging practices of CALPHAD toward the development of high entropy alloys and complex concentrated alloys
Gorsse, S., & Tancret, F. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.152 · Cited by 102
Impact of Chemical Fluctuations on Stacking Fault Energies of CrCoNi and CrMnFeCoNi High Entropy Alloys from First Principles
Ikeda, Y., Körmann, F., Tanaka, I., & Neugebauer, J. (2018) · Entropy · doi:10.3390/e20090655 · Cited by 102
High-strength ultrafine-grained CoCrFeNiNb high-entropy alloy prepared by mechanical alloying: Properties and strengthening mechanism
Průša, F., Cabibbo, M., Šenková, A., Kučera, V., Veselka, Z., Školáková, A., Vojtěch, D., Cibulková, J., & Čapek, J. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155308 · Cited by 102
Evolution of microstructure and mechanical properties of aluminum matrix composites reinforced with dual-phase heterostructures
Su, W., Wang, H. M., Li, G., & Zhang, Y. (2024) · Materials Science and Engineering A · doi:10.1016/j.msea.2024.146500 · Cited by 102
Microstructure and hardness of NbTiZr and NbTaTiZr refractory medium-entropy alloy coatings on Zr alloy by laser cladding
Guan, H., Chai, L., Wang, Y., Xiang, K., Wu, L., Pan, H., Yang, M., Teng, C., & Zhang, W. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.149338 · Cited by 101
Strategies for improving ductility of ordered intermetallics
Jiao, Z., Luan, J., & Liu, C. T. (2016) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2016.01.014 · Cited by 100
Self-citation
A Novel Low-Activation VCrFeTaxWx (x = 0.1, 0.2, 0.3, 0.4, and 1) High-Entropy Alloys with Excellent Heat-Softening Resistance
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Entropy · doi:10.3390/e20120951 · Cited by 100
Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting
Wu, Y., Zhao, X., Chen, Q., Yang, C., Jiang, M. G., Liu, C., Jia, Z., Chen, Z., Yang, T., & Liu, Z. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2037055 · Cited by 100
Self-citation
A cost-effective eutectic high entropy alloy with an excellent strength–ductility combination designed by VEC criterion
Wu, H., Xie, J., Yang, H., Shu, D., Hou, G., Li, J., Zhou, Y., & Sun, X. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.05.165 · Cited by 100
Development and Property Tuning of Refractory High-Entropy Alloys: A Review
Hua, X.-J., Hu, P., Xing, H., Han, J., Ge, S., Li, S., He, C.-J., Wang, K., & Cui, C. (2022) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-022-01382-x · Cited by 100
Microstructures and hydrogen storage properties of La Ni Fe V Mn alloys
Kunce, I., Polański, M., & Czujko, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.039 · Cited by 99
Phase prediction of Ni-base superalloys via high-throughput experiments and machine learning
Qin, Z., Wang, Z., Wang, Y., Zhang, L., Li, W., Liu, J., Wang, Z., Li, Z., Pan, J., Zhao, L., et al. (2020) · Materials Research Letters · doi:10.1080/21663831.2020.1815093 · Cited by 99
Machine learning assisted prediction of the Young’s modulus of compositionally complex alloys
Khakurel, H., Taufique, M. F. N., Roy, A., Balasubramanian, G., Ouyang, G., Cui, J., Johnson, D. D., & Devanathan, R. (2021) · Scientific Reports · doi:10.1038/s41598-021-96507-0 · Cited by 99
A review on BCC-structured high-entropy alloys for hydrogen storage
Kong, L., Cheng, B. C., Wan, D. Q., & Xue, Y. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1135864 · Cited by 99
Effect of atomic size difference on the type of major intermetallic phase in arc-melted CoCrFeNiX high-entropy alloys
Tsai, M., Fan, A.-C., & Wang, H.-A. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.286 · Cited by 98
Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMo Ni high entropy alloys
Zhuang, Y., Zhang, X. L., & Gu, X. Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.003 · Cited by 98
Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy
Zhang, C., Zhu, C., Harrington, T., & Vecchio, K. S. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.020 · Cited by 98
Effects of phase composition and elemental partitioning on soft magnetic properties of AlFeCoCrMn high entropy alloys
Jung, C., Kang, K., Marshal, A., Pradeep, K. G., Seol, J. B., Lee, H. M., & Choi, P. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.007 · Cited by 98
Effect of Cr content on microstructure and properties of Mo0.5VNbTiCrx high-entropy alloys
Xiang, C., Fu, H., Zhang, Z. M., Han, E., Zhang, H., Wang, J., & Hu, G. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153352 · Cited by 98
Effect of the valence electron concentration on the yield strength of Ti–Zr–Nb–V high-entropy alloys
Wang, J., Bai, S., Tang, Y., Li, S., Liu, X., Jia, J., Ye, Y., & Zhu, L. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159190 · Cited by 98
Accelerated discovery of single-phase refractory high entropy alloys assisted by machine learning
Yan, Y., Lü, D., & Wang, K. (2021) · Computational Materials Science · doi:10.1016/j.commatsci.2021.110723 · Cited by 104
Hardness prediction of high entropy alloys with machine learning and material descriptors selection by improved genetic algorithm
Li, S., Li, S., Liu, D.-R., Zou, R., & Yang, Z. (2022) · Computational Materials Science · doi:10.1016/j.commatsci.2022.111185 · Cited by 99
Improving machine learning based phase and hardness prediction of high-entropy alloys by using Gaussian noise augmented data
Ye, Y., Li, Y., Ouyang, R., Zhang, Z., Tang, Y., & Bai, S. (2023) · Computational Materials Science · doi:10.1016/j.commatsci.2023.112140 · Cited by 98
Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy
Pohan, R. M., Gwalani, B., Lee, J.-H., Alam, T., Hwang, J. Y., Ryu, H. J., Banerjee, R., & Hong, S. H. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.013 · Cited by 97
Development of MoNbVTax refractory high entropy alloy with high strength at elevated temperature
Zheng, W., Lü, S., Wu, S., Chen, X., & Guo, W. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.143554 · Cited by 97
Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties
Rao, Z., Wang, X., Zhu, J. T., Chen, X., Wang, L., Si, J., Wu, Y., & Hui, X. (2016) · Intermetallics · doi:10.1016/j.intermet.2016.06.011 · Cited by 96
Microstructure and Wear Behavior of FeCoCrNiMo0.2 High Entropy Coatings Prepared by Air Plasma Spray and the High Velocity Oxy-Fuel Spray Processes
Li, T., Liu, Y., Liu, B., Guo, W., & Xu, L. (2017) · Coatings · doi:10.3390/coatings7090151 · Cited by 96
Simultaneous Twinning and Microband Formation Under Dynamic Compression in a High Entropy Alloy with a Complex Energetic Landscape
Foley, D. L., Huang, S. H., Anber, E. A., Shannahan, L., Shen, Y., Lang, A. C., Barr, C. M., Spearot, D. E., Lamberson, L. E., & Taheri, M. L. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.08.047 · Cited by 96
Mechanical properties of Cantor alloys driven by additional elements: a review
Zeng, Z., Xiang, M., Zhang, D., Shi, J., Wang, W., Tang, X., Tang, W., Wang, Y., Ma, X., Chen, Z., et al. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.09.019 · Cited by 96
Composition Dependence on the Evolution of Nanoeutectic in CoCrFeNiNbx (0.45 ≤ x ≤ 0.65) High Entropy Alloys
Chanda, B., & Das, J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700908 · Cited by 95
Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility
Yin, Y. J., Zhang, J., Tan, Q., Zhuang, W., Mo, N., Bermingham, M. J., & Zhang, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.033 · Cited by 95
Effects of annealing treatment on microstructure and hardness of bulk AlCrFeNiMo0.2 eutectic high-entropy alloy
Dong, Y., Jiang, L., Jiang, H. Z., Lu, Y., Wang, T., & Li, T. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.046 · Cited by 95
Structure of some CoCrFeNi and CoCrFeNiPd multicomponent HEA alloys by diffraction techniques
Dahlborg, U., Cornide, J., Calvo-Dahlborg, M., Hansen, T. C., Fitch, A. N., Leong, Z., Chambreland, S., & Goodall, R. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.04.248 · Cited by 94
On the prediction and the formation of the sigma phase in CrMnCoFeNix high entropy alloys
Christofidou, K. A., McAuliffe, T., Mignanelli, P. M., Stone, H. J., & Jones, N. G. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.032 · Cited by 94
Formation and stability of C14 type Laves phase in multi component high-entropy alloys
Mishra, S. S., Yadav, T. P., Srivastava, O. N., Mukhopadhyay, N. K., & Biswas, K. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.153764 · Cited by 94
Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment
Miao, J., Yao, H., Wang, J., Lu, Y., Wang, T., & Li, T. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.162380 · Cited by 94
Microstructure and mechanical properties of WNbMoTaZrx (x = 0.1, 0.3, 0.5, 1.0) refractory high entropy alloys
Chen, S., Zhang, J., Guan, S., Li, T., Liu, J. Q., Wu, F., & Wu, Y. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.142701 · Cited by 94
Corrosion Behaviors and Mechanism of Crfeni2 Based High-Entropy Alloys
Zhang, M., Shi, X., Li, Z., Xu, H., & Li, G. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110562 · Cited by 94
Synthesis Strategies for High Entropy Nanoparticles
Yang, L., He, R., Chai, J., Qi, X., Xue, Q., Bi, X., Yu, J., Sun, Z., Xia, L., Wang, K., et al. (2024) · Advanced Materials · doi:10.1002/adma.202412337 · Cited by 97
Effect of Atomic Size Difference on the Microstructure and Mechanical Properties of High-Entropy Alloys
Wu, C.-S., Tsai, P.-H., Kuo, C.-M., & Tsai, C. (2018) · Entropy · doi:10.3390/e20120967 · Cited by 93
Phase evolution and magnetic characteristics of TiFeNiCr and TiFeNiCrM (M = Mn, Co) high entropy alloys
Mishra, R. K., & Shahi, R. R. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.06.124 · Cited by 92
High Entropy Alloys Manufactured by Additive Manufacturing
Torralba, J. M., & Campos, M. (2020) · Metals · doi:10.3390/met10050639 · Cited by 97
Improving electromagnetic properties of FeCoNiSi0.4Al0.4 high entropy alloy powders via their tunable aspect ratio and elemental uniformity
Zhang, B., Duan, Y., Cui, Y., Ma, G., Wang, T., & Dong, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.018 · Cited by 91
CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements
Qin, G., Li, Z., Chen, R., Zheng, H., Fan, C., Wang, L., Su, Y., Ding, H., Guo, J., & Fu, H. (2019) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.468 · Cited by 91
Development of a novel light weight Al35Cr14Mg6Ti35V10 high entropy alloy using mechanical alloying and spark plasma sintering
Chauhan, P., Yebaji, S. G., Nadakuduru, V. N., & Thangaraju, S. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153367 · Cited by 91
Tribological Properties of High-Entropy Alloys under Dry Conditions for a Wide Temperature Range—A Review
Kasar, A. K., Scalaro, K., & Menezes, P. L. (2021) · Materials · doi:10.3390/ma14195814 · Cited by 91
Effect of Zr on the as-cast microstructure and mechanical properties of lightweight Ti2VNbMoZrx refractory high-entropy alloys
Li, T., Miao, J., Lu, Y., Wang, T., & Li, T. (2021) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2021.105762 · Cited by 91
Annealing effect on the phase stability and mechanical properties of (FeNiCrMn)(100−)Co high entropy alloys
Zhu, Z., Ma, K., Yang, X. M., & Shek, C. H. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.376 · Cited by 91
Rare-earth high entropy alloys with hexagonal close-packed structure
Qiao, J., Bao, M. L., Zhao, Y., Yang, H., Wu, Y., Zhang, Y., Hawk, J. A., & Gao, M. C. (2018) · Journal of Applied Physics · doi:10.1063/1.5051514 · Cited by 90
RF magnetron sputtered AlCoCrCu0.5FeNi high entropy alloy (HEA) thin films with tuned microstructure and chemical composition
Khan, N. A., Akhavan, B., Zhou, C., Zhou, H., Chang, L., Wang, Y. U., Liu, Y., Fu, L. X., Bilek, M., & Liu, Z. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155348 · Cited by 90
Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys
Huang, W., Wang, X., Qiao, J., & Wu, Y. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.165187 · Cited by 90
Machine learning assisted design of BCC high entropy alloys for room temperature hydrogen storage
Halpren, E., Yao, X., Chen, Z., & Singh, C. V. (2024) · Acta Materialia · doi:10.1016/j.actamat.2024.119841 · Cited by 90
Influence of synthesis method on microstructure and mechanical behavior of Co-free AlCrFeNi medium-entropy alloy
Jiang, Z., Chen, W., Xia, Z., Xiong, W., & Fu, Z. (2019) · Intermetallics · doi:10.1016/j.intermet.2019.02.006 · Cited by 89
Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloys
Zhuang, Y., Liu, W. J., Chen, Z. Y., Xue, H., & Jiang, H. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.003 · Cited by 89
The Phase Competition and Stability of High-Entropy Alloys
Liu, W. H., Wu, Y., He, J., Zhang, Y., Liu, C. T., & Lü, Z. (2014) · JOM · doi:10.1007/s11837-014-1119-4 · Cited by 89
Self-citation
Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys
Kumar, A., Dhekne, P. P., Swarnakar, A. K., & Chopkar, M. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.10.099 · Cited by 89
Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering
Hu, C., Liu, X., Tang, Q., Wang, W., Yan, X., & Dai, P. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.168 · Cited by 88
Structure-property relationships in hot forged AlxCoCrFeNi high entropy alloys
Sourav, A., Yebaji, S. G., & Thangaraju, S. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139877 · Cited by 88
Lightweight refractory high entropy alloy coating by laser cladding on Ti–6Al–4V surface
Chen, L., Wang, Y., Hao, X., Zhang, X., & Liu, H. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109823 · Cited by 88
Tribological Performance of High-Entropy Coatings (HECs): A Review
Patel, P., Roy, A., Sharifi, N., Stoyanov, P., Chromik, R. R., & Moreau, C. (2022) · Materials · doi:10.3390/ma15103699 · Cited by 88
Excellent room-temperature tensile ductility in as-cast Ti37V15Nb22Hf23W3 refractory high entropy alloys
Huang, W., Hou, J., Wang, X., Qiao, J., & Wu, Y. (2022) · Intermetallics · doi:10.1016/j.intermet.2022.107735 · Cited by 88
Effects of Nb content on the microstructure and properties of CoCrFeMnNiNbx high-entropy alloy coatings by laser cladding
Feng, M., Lin, T., Lian, G., Chen, C., & Huang, X. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.01.002 · Cited by 88
Computational modeling of high-entropy alloys: Structures, thermodynamics and elasticity
Gao, M. C., Gao, P., Hawk, J. A., Ouyang, L., Alman, D. E., & Widom, M. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.366 · Cited by 87
Effects of the element La on the corrosion properties of CrMnFeNi high entropy alloys
Sun, Y., Wang, Z., Yang, H., Lan, A., & Qiao, J. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155825 · Cited by 87
A ductile Nb40Ti25Al15V10Ta5Hf3W2 refractory high entropy alloy with high specific strength for high-temperature applications
Pang, J., Zhang, H., Zhang, L., Zhu, Z., Fu, H., Li, H., Wang, A., Li, Z., & Zhang, H. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.142290 · Cited by 87
Current application status of multi-scale simulation and machine learning in research on high-entropy alloys
Jiang, D., Xie, L., & Wang, L. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.233 · Cited by 93
Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix
Liang, D., Zhao, C., Zhu, W., Wei, P., Jiang, F., Zhang, Y., Sun, Q., & Ren, F. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138107 · Cited by 86
Chemical state, structure and mechanical properties of multi-element (CrTaNbMoV)Nx films by reactive magnetron sputtering
Feng, X., Zhang, K., Zheng, Y., Zhou, H. D., & Wan, Z. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.121991 · Cited by 86
First-principles prediction of incipient order in arbitrary high-entropy alloys: exemplified in Ti0.25CrFeNiAl
Singh, P. K., Smirnov, A. V., Alam, A., & Johnson, D. D. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.02.063 · Cited by 86
Remarkable cavitation erosion–corrosion resistance of CoCrFeNiTiMo high-entropy alloy coatings
Xu, J., Peng, S., Li, Z., Jiang, S., Xie, Z., Munroe, P. R., & Lu, H. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109663 · Cited by 86
On the microstructures, phase assemblages and properties of Al0.5CoCrCuFeNiSix high-entropy alloys
Liu, X., Lei, W., Ma, L., Liu, J., Liu, J., & Cui, J. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.085 · Cited by 86
Laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites
Meng, G., Yue, T. M., Lin, X., Yang, H., Xie, H., & Ding, X. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.02.001 · Cited by 85
Effects of processing route on phase evolution and mechanical properties of CoCrCuFeNiSix high entropy alloys
Kumar, A., Swarnakar, A. K., Basu, A., & Chopkar, M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.03.242 · Cited by 85
Comparing the Activity of Complex Solid Solution Electrocatalysts Using Inflection Points of Voltammetric Activity Curves as Activity Descriptors
Löffler, T., Waag, F., Gökce, B., Ludwig, A., Barcikowski, S., & Schuhmann, W. W. (2021) · ACS Catalysis · doi:10.1021/acscatal.0c03313 · Cited by 89
Influencing factors and mechanism of high-temperature oxidation of high-entropy alloys: A review
Wei, Y. S., Fu, Y., Pan, Z., Ma, Y.-C., Cheng, H., Zhao, Q., Luo, H., & Li, X. (2021) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-021-2257-7 · Cited by 83
The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy
Li, X., Li, H., Li, Q., Jin, C., Hua, K., & Wang, H. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.111921 · Cited by 85
Compositive role of refractory element Mo in improving strength and ductility of face-centered-cubic complex concentrated alloys
Jang, T. J., Lee, Y. N., Ikeda, Y., Körmann, F., Baek, J.-H., Do, H.-S., Choi, Y. T., Gwon, H., Suh, J., Kim, H. S., et al. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.119030 · Cited by 85
Microstructural features and tensile behaviors of the Al0.5CrCuFeNi2 high-entropy alloys by cold rolling and subsequent annealing
Ma, S. G., Qiao, J., Wang, Z., Yang, H., & Zhang, Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.092 · Cited by 85
Structure and high temperature mechanical properties of novel non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys
Stepanov, N., Shaysultanov, D. G., Tikhonovsky, М. А., & Zherebtsov, S. V. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.09.010 · Cited by 84
Effects of Boron Content on microstructure and mechanical properties of AlFeCoNiBx High Entropy Alloy Prepared by vacuum arc melting
Hou, L., Hui, J., Yao, Y., Chen, J., & Liu, J. (2019) · Vacuum · doi:10.1016/j.vacuum.2019.03.019 · Cited by 84
A new infinite solid solution strategy to design eutectic high entropy alloys with B2 and BCC structure
Ye, X., Xiong, J., Wu, X., Liu, C. X., Xu, D. M., Zhang, W., Fang, D., & Li, B. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.113886 · Cited by 84
Self-citation
A first-principles study of hydrogen storage of high entropy alloy TiZrVMoNb
Hu, J., Zhang, J., Xiao, H., Xie, L., Sun, G., Shen, H., Li, P., Zhang, J., & Zu, X. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.03.200 · Cited by 84
High entropy alloy synthesis, characterisation, manufacturing & potential applications: a review
Kaushik, N., Meena, A., & Mali, H. S. (2021) · Materials and Manufacturing Processes · doi:10.1080/10426914.2021.2006223 · Cited by 87
Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying
Alijani, F., Reihanian, M., & Gheisari, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.09.204 · Cited by 83
High entropy nitride (HEN) thin films of AlCoCrCu0.5FeNi deposited by reactive magnetron sputtering
Khan, N. A., Akhavan, B., Zhou, C., Zhou, H., Chang, L., Wang, H., Liu, Y., Bilek, M., & Liu, Z. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126327 · Cited by 83
Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy
Gwalani, B., Ayyagari, A. V., Choudhuri, D., Scharf, T. W., Mukherjee, S., Gibson, M. A., & Banerjee, R. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.034 · Cited by 83
Prediction of structure and elastic properties of AlCrFeNiTi system high entropy alloys
Nong, Z., Zhu, J., & Zhao, R. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.03.014 · Cited by 82
A Novel Series of Refractory High-Entropy Alloys Ti2ZrHf0.5VNbx with High Specific Yield Strength and Good Ductility
Qiao, D., Jiang, H. Z., Jiao, W., Lu, Y., Cao, Z., & Li, T. (2019) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-019-00921-3 · Cited by 82
Factors determining solid solution phase formation and stability in CoCrFeNiX0.4 (X=Al, Nb, Ta) high entropy alloys fabricated by powder plasma arc additive manufacturing
Zhang, Y., Chen, X., Jayalakshmi, S., Singh, R. A., Deev, V. B., & Prusov, E. S. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157625 · Cited by 82
Equal-Channel Angular Extrusion of a Low-Density High-Entropy Alloy Produced by High-Energy Cryogenic Mechanical Alloying
Hammond, V. H., Atwater, M. A., Darling, K. A., Nguyen, H. Q., & Kecskes, L. J. (2014) · JOM · doi:10.1007/s11837-014-1113-x · Cited by 82
Recent advances of high entropy alloys for aerospace applications: a review
Dada, M. O., Popoola, A. P. I., & Mathe, N. (2021) · World Journal of Engineering · doi:10.1108/wje-01-2021-0040 · Cited by 84
High-Entropy Materials in SOFC Technology: Theoretical Foundations for Their Creation, Features of Synthesis, and Recent Achievements
Pikalova, E. Y., Kalinina, E. G., Pikalova, N. S., & Filonova, E. A. (2022) · Materials · doi:10.3390/ma15248783 · Cited by 84
High-throughput and data-driven machine learning techniques for discovering high-entropy alloys
Zhichao, L., Ma, D., Liu, X., & Lü, Z. (2024) · Communications Materials · doi:10.1038/s43246-024-00487-3 · Cited by 85
Sunflower-like Solidification Microstructure in a Near-eutectic High-entropy Alloy
Guo, S. L., Ng, C., & Liu, C. T. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.844737 · Cited by 81
Self-citation
Seaweed eutectic-dendritic solidification pattern in a CoCrFeNiMnPd eutectic high-entropy alloy
Tan, Y., Li, J., Wang, J., & Kou, H. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.02.004 · Cited by 81
Severe plastic deformation driven nanostructure and phase evolution in a Al 0.5 CoCrFeMnNi dual phase high entropy alloy
Reddy, T. S., Wani, I. S., Bhattacharjee, T., Reddy, S. R., Saha, R., & Bhattacharjee, P. P. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.09.002 · Cited by 81

Authors: Guo, S., Ng, C., Lu, J., & Liu, C. T.
Affiliations: Hong Kong Polytechnic University (HK)
City University of Hong Kong 2 College of Science and Engineering, , Kowloon, Hong Kong
ORCID: Guo, Sheng
Liu, C. T.
Venue: Journal of Applied Physics
Publisher: AIP Publishing
Published: 2011-05-15
Volume: 109
Issue: 10
ISSN: 0021-8979 (ISSN-L)
1089-7550
DOI: 10.1063/1.3587228
OpenAlex: W1991258650
Cited by: 2,911
References: 28
Citations by year: 2026: 347 · 2025: 423 · 2024: 406 · 2023: 346 · 2022: 335 · 2021: 254 · 2020: 182 · 2019: 173 · 2018: 138 · 2017: 83 · 2016: 76 · 2015: 67 · 2014: 39 · 2013: 31 · 2012: 10
FWCI: 45.92
Type: journal article
Language: en
Open access: closed
Locations: Journal of Applied Physics (publishedVersion)
PolyU Institutional Research Archive (Hong Kong Polytechnic University) (submittedVersion)
Chalmers Research (Chalmers University of Technology) (submittedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
Physical Sciences › Materials Science › Metals and Alloys › Metallic Glasses and Amorphous Alloys
Keywords: high-entropy alloys, phase stability, valence electron concentration, FCC solid solution, BCC solid solution, excess enthalpy, solid solution formation, alloy design, thermodynamic properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks