The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal conductivity of metal-matrix composites
Abstract
The thermal conductivity of metal-matrix composites, which are potential electronic packaging materials, is calculated using effective medium theory and finite-element techniques. The thermal boundary resistance, which occurs at the interface between the metal and the included phase (typically ceramic particles), has a large effect for small particle sizes. It is found that SiC particles in Al must have radii in excess of 10 μm to obtain the full benefit of the ceramic phase on the thermal conductivity. Bimodal distributions of particle size are considered, since these are often used to fabricate high-volume fraction composites. It is found that if the small particles (in a bimodal distribution) have a radius less than 2.5 μm in SiC/Al their addition reduces the thermal conductivity of the composite. Diamond-containing composites, which have large thermal boundary resistance effects, are analyzed. Comparison of the effective medium theory results to finite-element calculations for axisymmetric unit-cell models in three dimensions and to simulation results on disordered arrays of particles in two dimensions confirms the validity of the theory.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Cited by
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
Yu, W., & Choi, S. U. S. (2003) · Journal of Nanoparticle Research · doi:10.1023/a:1024438603801 · Cited by 1,737
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Heat and fluid flow in high-power LED packaging and applications
Luo, X., Hu, R., Liu, S., & Wang, K. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.05.003 · Cited by 460
Thermal Boundary Conductance: A Materials Science Perspective
Monachon, C., Weber, L., & Dames, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031719 · Cited by 284
Metadata
- Authors
- Davis, L. C., & Artz, B. E.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1995-05-15
- Volume
- 77
- Issue
- 10
- Pages
- 4954-4960
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1985009321
- Cited by
- 175
- References
- 1
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal conductivity of metal-matrix composites. https://app.cochat.ai/papers/10.1063/1.359302
- The paper
- Davis, L. C., & Artz, B. E. (1995). Thermal conductivity of metal-matrix composites. Journal of Applied Physics. https://doi.org/10.1063/1.359302
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.