The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Single-crystal Pb(ZrxTi1−x)O3 thin films prepared by metal-organic chemical vapor deposition: Systematic compositional variation of electronic and optical properties
Abstract
Single-crystal thin films of Pb(ZrxTi1−x)O3 (PZT) covering the full compositional range (0⩽x⩽1) were deposited by metal-organic chemical vapor deposition. Epitaxial SrRuO3(001) thin films grown on SrTiO3(001) substrates by rf-magnetron sputter deposition served as template electrode layers to promote the epitaxial growth of PZT. X-ray diffraction, energy-dispersive x-ray spectroscopy, atomic force microscopy, transmission electron microscopy, and optical waveguiding were used to characterize the crystalline structure, composition, surface morphology, microstructure, refractive index, and film thickness of the deposited films. The PZT films were single crystalline for all compositions exhibiting cube-on-cube growth epitaxy with the substrate and showed very high degrees of crystallinity and orientation. The films exhibited typical root mean square surface roughness of ∼1.0–2.5 nm. For tetragonal films, the surface morphology was dominated by grain tilting resulting from ferroelectric domain formation. We report the systematic compositional variation of the optical, dielectric, polarization, and electronic transport properties of these single-crystalline PZT thin films. We show that the solid-solution phase diagram of the PZT system for thin films differs from the bulk due to epitaxy-induced strains and interfacial defect formation. High values of remanant polarization (30–55 μC/cm2) were observed for ferroelectric compositions in the range of 0.8⩽x⩽0.2. Unlike previous studies, the dielectric constant exhibited a clear dependence on composition with values ranging from 225 to 650. The coercive fields decreased with increasing Zr concentration to a minimum of 20 kV/cm for x=0.8. The undoped films exhibited both high resistivity and dielectric-breakdown strength (1013–1014 Ω cm at 100 kV/cm and 300–700 kV/cm, respectively).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scott, J. F., & Paz de Araujo, C. A. (1989) · Science · doi:10.1126/science.246.4936.1400 · Cited by 3,863
Ferroelectric Materials and Their Applications
(2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.10t001 · Cited by 1,367
Eom, C. B., Van Dover, R. B., Phillips, J. M., Werder, D. J., Marshall, J. H., Chen, C. H., Cava, R. J., Fleming, R. M., & Fork, D. K. (1993) · Applied Physics Letters · doi:10.1063/1.110436 · Cited by 443
Fatigue and retention in ferroelectric Y-Ba-Cu-O/Pb-Zr-Ti-O/Y-Ba-Cu-O heterostructures
Ramesh, R., Chan, W. K., Wilkens, B., Gilchrist, H., Sands, T., Tarascon, J. M., Keramidas, V. G., Fork, D. K., Lee, J., & Safari, A. (1992) · Applied Physics Letters · doi:10.1063/1.107488 · Cited by 369
Crystal Structure of Pb(Zr-Ti)O3
Shirane, G., & Suzuki, K. (1952) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.7.333 · Cited by 254
In situ deposition of epitaxial PbZrxTi(1−x)O3 thin films by pulsed laser deposition
Horwitz, J. S., Grabowski, K. S., Chrisey, D. B., & Leuchtner, R. E. (1991) · Applied Physics Letters · doi:10.1063/1.106284 · Cited by 186
Epitaxial growth of PbTiO3 thin films on (001) SrTiO3 from solution precursors
Seifert, A., Lange, F. F., & Speck, J. S. (1995) · Journal of Materials Research · doi:10.1557/jmr.1995.0680 · Cited by 159
Scaling of ferroelectric properties in La-Sr-Co-O/Pb-La-Zr-Ti-O/La-Sr-Co-O capacitors
Ramesh, R., Dutta, B., Ravi, T. S., Lee, J., Sands, T., & Keramidas, V. G. (1994) · Applied Physics Letters · doi:10.1063/1.111848 · Cited by 48
Preparation and structure of PbZrO3 epitaxial films by metalorganic chemical vapor deposition
Bai, G. R., Chang, H. L., Lam, D. J., & Gao, Y. (1993) · Applied Physics Letters · doi:10.1063/1.109596 · Cited by 42
Self-citation
Cited by
Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics
Damjanovic, D. (1998) · Reports on Progress in Physics · doi:10.1088/0034-4885/61/9/002 · Cited by 2,287
Ferroelectric thin films: Review of materials, properties, and applications
Setter, N., Damjanovic, D., Eng, L., Fox, G., Gevorgian, S., Hong, S., Kingon, A., Kohlstedt, H., Park, N. Y., Stephenson, G. B., et al. (2006) · Journal of Applied Physics · doi:10.1063/1.2336999 · Cited by 1,907
Diisopropylammonium Bromide Is a High-Temperature Molecular Ferroelectric Crystal
Fu, D.-W., Cai, H.-L., Liu, Y., Ye, Q., Zhang, W., Zhang, Y., Chen, X.-Y., Giovannetti, G., Capone, M., Li, J., et al. (2013) · Science · doi:10.1126/science.1229675 · Cited by 842
Piezoelectric-nanowire-enabled power source for driving wireless microelectronics
Xu, S., Hansen, B. J., & Wang, Z. L. (2010) · Nature Communications · doi:10.1038/ncomms1098 · Cited by 546
Jia, C.-L., Mi, S.-B., Urban, K., Vrejoiu, I., Alexe, M., & Hesse, D. (2008) · Nature Materials · doi:10.1038/nmat2080 · Cited by 520
Metadata
- Authors
- Foster, C. M., Bai, G.-R., Csencsits, R., Vetrone, J., Jammy, R., Wills, L. A., Carr, E., & Amano, J.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1997-03-01
- Volume
- 81
- Issue
- 5
- Pages
- 2349-2357
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2049733352
- Cited by
- 280
- References
- 9
- FWCI
- 16.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.