The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?
Open accessAbstract
Perovskite-containing solar cells were fabricated in a two-step procedure in which PbI2 is deposited via spin-coating and subsequently converted to the CH3NH3PbI3 perovskite by dipping in a solution of CH3NH3I. By varying the dipping time from 5 s to 2 h, we observe that the device performance shows an unexpectedly remarkable trend. At dipping times below 15 min the current density and voltage of the device are enhanced from 10.1 mA/cm2 and 933 mV (5 s) to 15.1 mA/cm2 and 1036 mV (15 min). However, upon further conversion, the current density decreases to 9.7 mA/cm2 and 846 mV after 2 h. Based on X-ray diffraction data, we determined that remnant PbI2 is always present in these devices. Work function and dark current measurements showed that the remnant PbI2 has a beneficial effect and acts as a blocking layer between the TiO2 semiconductor and the perovskite itself reducing the probability of back electron transfer (charge recombination). Furthermore, we find that increased dipping time leads to an increase in the size of perovskite crystals at the perovskite-hole-transporting material interface. Overall, approximately 15 min dipping time (∼2% unconverted PbI2) is necessary for achieving optimal device efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Self-citationLead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Compendium of chemical terminology
Gold, V. (1987) · Cited by 2,525
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Self-citationPalomares, E., Clifford, J. N., Haque, S. A., Lutz, T., & Durrant, J. R. (2003) · Journal of the American Chemical Society · doi:10.1021/ja027945w · Cited by 1,067
Global carbon dioxide levels near worrisome milestone
Monastersky, R. (2013) · Nature · doi:10.1038/497013a · Cited by 269
Fabregat-Santiago, F., García-Cañadas, J., Palomares, E., Clifford, J. N., Haque, S. A., Durrant, J. R., Garcia-Belmonte, G., & Bisquert, J. (2004) · Journal of Applied Physics · doi:10.1063/1.1812588 · Cited by 193
Spin-orbit splitting in semiconductor quantum dots with a parabolic confinement potential
Voskoboynikov, O., Lee, C. P., & Tretyak, O. V. (2001) · Physical review. B, Condensed matter · doi:10.1103/physrevb.63.165306 · Cited by 134
Cited by
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Self-citationRuddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Self-citationEfficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Metadata
- Authors
- Cao, D. H., Stoumpos, C. C., Malliakas, C. D., Katz, M. J., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G.
- Venue
- APL Materials
- Publisher
- AIP Publishing
- Published
- 2014-09-01
- Volume
- 2
- Issue
- 9
- ISSN
- 2166-532X (ISSN-L)
- OpenAlex
- W2024797147
- Cited by
- 297
- References
- 15
- FWCI
- 21.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.