Reducing GaN-on-diamond interfacial thermal resistance for high power transistor applications
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Integration of chemical vapor deposited polycrystalline diamond offers promising thermal performance for GaN-based high power radio frequency amplifiers. One limiting factor is the thermal barrier at the GaN to diamond interface, often referred to as the effective thermal boundary resistance (TBReff). Using a combination of transient thermoreflectance measurement, finite element modeling and microstructural analysis, the TBReff of GaN-on-diamond wafers is shown to be dominated by the SiNx interlayer for diamond growth seeding, with additional impacts from the diamond nucleation surface. By decreasing the SiNx layer thickness and minimizing the diamond nucleation region, TBReff can be significantly reduced, and a TBReff as low as 12 m2K/GW is demonstrated. This enables a major improvement in GaN-on-diamond transistor thermal resistance with respect to GaN-on-SiC wafers. A further reduction in TBReff towards the diffuse mismatch limit is also predicted, demonstrating the full potential of using diamond as the heat spreading substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Low Thermal Resistances at GaN–SiC Interfaces for HEMT Technology
Cho, J., Bozorg-Grayeli, E., Altman, D. H., Asheghi, M., & Goodson, K. E. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2011.2181481 · Cited by 109
Cited by
Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices
Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07014 · Cited by 169
Self-citationPfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
Metadata
- Authors
- Sun, H., Simon, R. B., Pomeroy, J. W., Francis, D., Faili, F., Twitchen, D. J., & Kuball, M.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2015-03-16
- Volume
- 106
- Issue
- 11
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2044240951
- Cited by
- 209
- References
- 1
- FWCI
- 5.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.