Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The development of GaN-on-diamond devices holds much promise for the creation of high-power density electronics. Inherent to the growth of these devices, a dielectric layer is placed between the GaN and diamond, which can contribute significantly to the overall thermal resistance of the structure. In this work, we explore the role of different interfaces in contributing to the thermal resistance of the interface of GaN/diamond layers, specifically using 5 nm layers of AlN, SiN, or no interlayer at all. Using time-domain thermoreflectance along with electron energy loss spectroscopy, we were able to determine that a SiN interfacial layer provided the lowest thermal boundary resistance (<10 m 2 K/GW) because of the formation of an Si–C–N layer at the interface. The AlN and no interlayer samples were observed to have TBRs greater than 20 m 2 K/GW as a result of a harsh growth environment that roughened the interface (enhancing phonon scattering) when the GaN was not properly protected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Schmidt, A. J., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.3006335 · Cited by 655
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
An optical pump-probe technique for measuring the thermal conductivity of liquids
Schmidt, A., Chiesa, M., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.2937458 · Cited by 184
Uncertainty analysis of thermoreflectance measurements
Yang, J., Ziade, E., & Schmidt, A. J. (2016) · Review of Scientific Instruments · doi:10.1063/1.4939671 · Cited by 174
Universal phonon mean free path spectra in crystalline semiconductors at high temperature
Freedman, J. P., Leach, J. H., Preble, E. A., Sitar, Z., Davis, R. F., & Malen, J. A. (2013) · Scientific Reports · doi:10.1038/srep02963 · Cited by 171
Liu, J., Zhu, J., Tian, M., Gu, X., Schmidt, A., & Yang, R. (2013) · Review of Scientific Instruments · doi:10.1063/1.4797479 · Cited by 163
Self-citationInterpreting picosecond acoustics in the case of low interface stiffness
Hohensee, G. T., Hsieh, W.-P., Losego, M. D., & Cahill, D. G. (2012) · Review of Scientific Instruments · doi:10.1063/1.4766957 · Cited by 87
Cited by
Pfeifer, T. W., Schonfeld, H. B., Scott, E. A., Aller, H. T., Gaskins, J. T., Olson, D. H., Braun, J. L., Graham, S., & Hopkins, P. E. (2025) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080423-010435 · Cited by 16
“This includes measurement at multiple modulation frequencies or with multiple spot sizes (43, 44, 68, 70) or fitting of multiple data types (50),development of transducerless measurements (71,75),and the use of unique sample geometries (44) or experimental configurations (77).”
Self-citation
Metadata
- Authors
- Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., & Graham, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-25
- Volume
- 10
- Issue
- 28
- Pages
- 24302-24309
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2811201021
- Cited by
- 169
- References
- 8
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices. https://app.cochat.ai/papers/10.1021/acsami.8b07014
- The paper
- Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., & Graham, S. (2018). Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.8b07014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.