The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cells
Open accessAbstract
Capacitance response of perovskite-based solar cells (PSCs) can be exploited to infer underlying physical mechanisms, both in the materials bulk and at outer interfaces. Particularly interesting is applying the depletion layer capacitance theory to PSCs, following common procedures used with inorganic and organic photovoltaic devices. Voltage-modulation of the depletion layer width allows extracting relevant parameters as the absorber defect density and built-in potential by means of the Mott-Schottky (MS) analysis. However, the uncritical use of the MS technique may be misleading and yields incorrect outcomes as a consequence of masking effects that accumulation capacitances, commonly observed in PSCs, produce on the measured capacitance value. Rules are provided here to select the measuring frequency that allows extracting depletion layer capacitance, and the voltage range in which it dominates, avoiding accumulation capacitive parasitic contributions. It is noted that the distinction of the depletion capacitance from the accumulation capacitance is only feasible in the case of perovskite layers containing significant defect density (∼1017 cm−3). It is confirmed that MS reproducibility is assured by hysteresis reduction at slow scan rates, and positive bias starting polarization. A complete procedure with specific checking points is provided here for consistent MS measurement and interpretation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Self-citationBrivio, F., Butler, K. T., Walsh, A., & van Schilfgaarde, M. (2014) · Physical Review B · doi:10.1103/physrevb.89.155204 · Cited by 755
Photoinduced Giant Dielectric Constant in Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Sanchez, R. S., Badia, L., Garcia-Belmonte, G., Kang, Y. S., Mora-Sero, I., & Bisquert, J. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5011169 · Cited by 744
Self-citationShi, J., Dong, J., Lv, S., Xu, Y., Zhu, L., Xiao, J., Xu, X., Wu, H., Li, D., Luo, Y., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4864638 · Cited by 505
Cited by
Electrochemical Impedance Spectroscopy of Metal Oxide Electrodes for Energy Applications
Bredar, A. R. C., Chown, A. L., Burton, A. R., & Farnum, B. H. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01965 · Cited by 1,035
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Polymer photocatalysts for solar-to-chemical energy conversion
Banerjee, T., Podjaski, F., Kröger, J., Biswal, B. P., & Lotsch, B. V. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00254-z · Cited by 763
Highly efficient and stable perovskite solar cells via a multifunctional hole transporting material
Zhou, J., Tan, L., Liu, Y., Li, H., Liu, X., Li, M., Wang, S., Zhang, Y., Jiang, C., Hua, R., et al. (2024) · Joule · doi:10.1016/j.joule.2024.02.019 · Cited by 735
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Lead-free tin-halide perovskite solar cells with 13% efficiency
Nishimura, K., Kamarudin, M. A., Hirotani, D., Hamada, K., Shen, Q., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104858 · Cited by 502
Futscher, M. H., Lee, J. M., McGovern, L., Muscarella, L. A., Wang, T., Haider, M. I., Fakharuddin, A., Schmidt-Mende, L., & Ehrler, B. (2019) · Materials Horizons · doi:10.1039/c9mh00445a · Cited by 409
Impedance Spectroscopy for Emerging Photovoltaics
von Hauff, E. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b00892 · Cited by 402
Xiong, S., Hou, Z., Zou, S., Lu, X., Yang, J., Hao, T., Zhou, Z., Xu, J., Zeng, Y., Xiao, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.009 · Cited by 402
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Self-citationElectrical doping in halide perovskites
Euvrard, J., Yan, Y., & Mitzi, D. B. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00286-z · Cited by 364
Guerrero, A., Bisquert, J., & Garcia-Belmonte, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00214 · Cited by 339
Self-citationNiu, T., Zhu, W., Zhang, Y., Xue, Q., Jiao, X., Wang, Z., Xie, Y.-M., Li, P., Chen, R., Huang, F., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.003 · Cited by 320
Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells
Bu, T., Wu, L., Liu, X., Yang, X., Zhou, P., Yu, X., Qin, T., Shi, J., Wang, S., Li, S., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700576 · Cited by 309
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Metadata
- Authors
- Almora, O., Aranda, C., Mas-Marzá, E., & Garcia-Belmonte, G.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2016-10-24
- Volume
- 109
- Issue
- 17
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2534439494
- Cited by
- 543
- References
- 27
- FWCI
- 11.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.