The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High reverse breakdown voltage Schottky rectifiers without edge termination on Ga2O3
Abstract
Vertical geometry Ni/Au-β-Ga2O3 Schottky rectifiers were fabricated on Hydride Vapor Phase Epitaxy layers on conducting bulk substrates, and the rectifying forward and reverse current-voltage characteristics were measured at temperatures in the range of 25–100 °C. The reverse breakdown voltage (VBR) of these β-Ga2O3 rectifiers without edge termination was a function of the diode diameter, being in the range of 920–1016 V (average value from 25 diodes was 975 ± 40 V, with 10 of the diodes over 1 kV) for diameters of 105 μm and consistently 810 V (810 ± 3 V for 22 diodes) for a diameter of 210 μm. The Schottky barrier height decreased from 1.1 at 25 °C to 0.94 at 100 °C, while the ideality factor increased from 1.08 to 1.28 over the same range. The figure-of-merit (VBR2/Ron), where Ron is the on-state resistance (∼6.7 mΩ cm2), was approximately 154.07 MW·cm−2 for the 105 μm diameter diodes. The reverse recovery time was 26 ns for switching from +5 V to −5 V. These results represent another impressive advance in the quality of bulk and epitaxial β-Ga2O3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685
Cited by
A review of Ga2O3 materials, processing, and devices
Pearton, S. J., Yang, J., Cary, P. H., Ren, F., Kim, J., Tadjer, M. J., & Mastro, M. A. (2018) · Applied Physics Reviews · doi:10.1063/1.5006941 · Cited by 3,117
Self-citationPerspective: Ga2O3 for ultra-high power rectifiers and MOSFETS
Pearton, S. J., Ren, F., Tadjer, M., & Kim, J. (2018) · Journal of Applied Physics · doi:10.1063/1.5062841 · Cited by 659
Self-citationXue, H., He, Q., Jian, G., Long, S., Pang, T., & Liu, M. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2712-1 · Cited by 276
Metadata
- Authors
- Yang, J., Ahn, S., Ren, F., Pearton, S. J., Jang, S., Kim, J., & Kuramata, A.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2017-05-08
- Volume
- 110
- Issue
- 19
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2613561534
- Cited by
- 193
- References
- 1
- FWCI
- 8.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.