Persistent phosphors for the future: Fit for the right application
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
When the bright green-emitting SrAl2O4:Eu,Dy persistent phosphor was described in the literature in 1996, this presented a real breakthrough in performance, both in terms of initial brightness and afterglow duration. Since then, many new persistent phosphors, with emission spanning from the ultraviolet to the near infrared, have been developed. Very few materials, however, reach a similar afterglow time and intensity as SrAl2O4:Eu,Dy, which is still considered the benchmark phosphor. The present paper discusses the reasons for this—seemingly—fundamental limitation and gives directions for further improvements. An overview is given of the preparation methods of persistent phosphors and their properties. Much attention is paid to the correct evaluation of a persistent phosphor in absolute units rather than vague terms or definitions. State of the art persistent phosphors are currently used extensively in emergency signage, indicators, and toys. Many more applications could be possible by tuning the range of trap depths used for energy storage. Very shallow traps could be used for temperature monitoring in, for example, cryopreservation. Deeper traps are useful for x-ray imaging and dosimetry. Next to these applications, a critical evaluation is made of the possibilities of persistent phosphors for applications such as solar energy storage and photocatalysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
TiO2 photocatalysis and related surface phenomena
FUJISHIMA, A., ZHANG, X., & TRYK, D. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.10.001 · Cited by 6,737
Second window for in vivo imaging
Smith, A. M., Mancini, M. C., & Nie, S. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.326 · Cited by 2,848
Tan, H., Wang, T., Shao, Y., Yu, C., & Hu, L. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00387 · Cited by 59
Cited by
Setchfield, K., Gorman, A., Simpson, A. H. R. W., Somekh, M. G., & Wright, A. J. (2023) · Biomedical Optics Express · doi:10.1364/boe.493588 · Cited by 49
Giordano, L., Merízio, L. G., de Mattos, E. A., Nicolai, Y. M., da Silva, V. M. P., Marques, I. D., Teixeira, V. C., Bonturim, E., Gonçalves, R. R., Manzani, D., et al. (2026) · Advanced Optical Materials · doi:10.1002/adom.202503550 · Cited by 5
Metadata
- Authors
- Poelman, D., Van der Heggen, D., Du, J., Cosaert, E., & Smet, P. F.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2020-12-24
- Volume
- 128
- Issue
- 24
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W3115464877
- Cited by
- 183
- References
- 3
- FWCI
- 9.23
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Persistent phosphors for the future: Fit for the right application. https://app.cochat.ai/papers/10.1063/5.0032972
- The paper
- Poelman, D., Van der Heggen, D., Du, J., Cosaert, E., & Smet, P. F. (2020). Persistent phosphors for the future: Fit for the right application. Journal of Applied Physics. https://doi.org/10.1063/5.0032972
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.