Cathode temperature measurement of a hydrogen self-field MPD thruster during 1 ms quasi-steady operation
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
In this study, a 2D two-color pyrometer was developed to measure the cathode surface temperature distribution of a high-power hydrogen magnetoplasmadynamic thruster. The developed measurement system consists of an object lens, a beam splitter, bandpass filters, and two cameras. Wavelengths of 950 and 980 nm were selected to achieve a high signal-to-noise ratio by reducing the effects of plasma radiation. The cathode temperature distribution was measured in a discharge current range of 6–13 kA during approximately 1 ms quasi-steady operation. A spot-like high-temperature region over 3000 K and an overall low temperature were observed at low discharge currents. The overall cathode tip region was heated to approximately 2800 K at high discharge currents. The temperature distribution with high temperature only near the cathode tip was measured during quasi-steady operation, the duration of which is shorter than the duration of thermal conduction. These results show that the discharge current distribution near the cathode is stable during the time scale of sub-milliseconds. We confirmed that this temperature distribution remains constant during a 1 ms duty cycle through cathode temperature measurements at each operation time with a 0.2 ms exposure time. The measurement error was approximately 10% of the calculated temperature; a cross-check was performed utilizing near-infrared spectrum measurements.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A similar method has been successfully applied in high-density plasma environments and high-temperature regions, where direct measurement is difficult, such as in measuring the radiation temperature of electrodes in welding and arc discharges [25, 26].”
From Computational modelling of water-fuelled Hall Effect Thrusters (2025) · cites this paper as [26]
Citations
Cites
Fundamentals of Electric Propulsion: Ion and Hall Thrusters
Goebel, D. M., & Katz, I. (2008) · doi:10.1002/9780470436448 · Cited by 1,351
Spacecraft Electric Propulsion-An Overview
Martinez-Sanchez, M., & Pollard, J. E. (1998) · Journal of Propulsion and Power · doi:10.2514/2.5331 · Cited by 479
Watanabe, S.-I., Tsuda, Y., Yoshikawa, M., Tanaka, S., Saiki, T., & Nakazawa, S. (2017) · Space Science Reviews · doi:10.1007/s11214-017-0377-1 · Cited by 361
Perspectives, frontiers, and new horizons for plasma-based space electric propulsion
Levchenko, I., Xu, S., Mazouffre, S., Lev, D., Pedrini, D., Goebel, D., Garrigues, L., Taccogna, F., & Bazaka, K. (2020) · Physics of Plasmas · doi:10.1063/1.5109141 · Cited by 228
Experimental results in high-specific-impulse thermoionic acceleration
Ducati, A. C., Giannini, G. M., & MUEHLBERGER, E. (1964) · AIAA Journal · doi:10.2514/3.2575 · Cited by 155
Future Directions for Electric Propulsion Research
Dale, E., Jorns, B., & Gallimore, A. (2020) · Aerospace · doi:10.3390/aerospace7090120 · Cited by 95
Quasi-Steady Magnetoplasmadynamic Thruster Performance Database
Choueiri, E., & Ziemer, J. K. (2001) · Journal of Propulsion and Power · doi:10.2514/2.5857 · Cited by 80
Myers, R., LaPointe, M. R., & MANTENIEKS, M. (1991) · Conference on Advanced SEI Technologies · doi:10.2514/6.1991-3568 · Cited by 67
A Survey of Propulsion Options for Cargo and Piloted Missions to Mars
Sankaran, K., Cassady, L. D., Kodys, A., et al. (2004) · Annals of the New York Academy of Sciences · doi:10.1196/annals.1311.027 · Cited by 66
The measurement of metal droplet temperature in GMA welding by infrared two-colour pyrometry
Yamazaki, K., Yamamoto, E., Suzuki, K., Koshiishi, F., Waki, K., Tashiro, S., Tanaka, M., & Nakata, K. (2010) · Welding International · doi:10.1080/09507110902842950 · Cited by 50
Cathode erosion studies on MPD thrusters
Schrade, H. O., Auweter‐Kurtz, M., & Kurtz, H. (1987) · AIAA Journal · doi:10.2514/3.9750 · Cited by 47
The Rise of the Electric Age for Satellite Propulsion
Lev, D. R., Emsellem, G. D., & Hallock, A. K. (2017) · New Space · doi:10.1089/space.2016.0020 · Cited by 43
MPD thruster performance with various propellants
Uematsu, K., Morimoto, S., & Kuriki, K. (1985) · Journal of Spacecraft and Rockets · doi:10.2514/3.25766 · Cited by 41
Voronov, A., Troitskiy, A. A., Egorov, I. D., et al. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1686/1/012023 · Cited by 40
A Critical Review of Thrust Models for Applied-Field Magnetoplasmadynamic Thrusters
Coogan, W., & Choueiri, E. (2017) · AIAA/SAE/ASEE Joint Propulsion Conference (JPC) · doi:10.2514/6.2017-4723 · Cited by 33
Cathode phenomena in plasma thrusters
Auweter‐Kurtz, M., Glocker, B., Kurtz, H., et al. (1993) · Journal of Propulsion and Power · doi:10.2514/3.23703 · Cited by 25
Measurement of MPD thruster erosion using surface layer activation
Polk, J. E., JASKOWSKY, W. V., Kelley, A. J., et al. (1987) · Journal of Propulsion and Power · doi:10.2514/3.22949 · Cited by 25
Cathode phenomena in a low-power magnetoplasmadynamic thruster
Myers, R., Suzuki, N., Kelly, A. J., et al. (1991) · Journal of Propulsion and Power · doi:10.2514/3.23389 · Cited by 19
Electrode erosion in high power thermal arcs
Hackmann, J., & Bebber, H. J. (1992) · Pure and Applied Chemistry · doi:10.1351/pac199264050653 · Cited by 13
Analytical investigation of anode heat flux in a magnetoplasmadynamic thruster
Ahangar, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.038 · Cited by 10
MHD Simulation and Thermal Design of an MPD Thruster
Kawasaki, A., Kubota, K., Funaki, I., et al. (2014) · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES AEROSPACE TECHNOLOGY JAPAN · doi:10.2322/tastj.12.pb_19 · Cited by 8
Self-citationCathode erosion studies on MPD thrusters
Schrade, H. O., Auweter‐Kurtz, M., & Kurtz, H. (1985) · International Electric Propulsion Conference (IEPC) · doi:10.2514/6.1985-2019 · Cited by 8
Measurement of the Applied-Field Component of the Thrust of a Lithium Lorentz Force Accelerator
Coogan, W., Hepler, M. A., & Choueiri, E. (2016) · AIAA/SAE/ASEE Joint Propulsion Conference (JPC) · doi:10.2514/6.2016-4537 · Cited by 4
Magneto Plasma Dynamic Thruster Using Water Propellant
(2021) · doi:10.2322/tastj.19.523 · Cited by 4
Mission Performance of High-Power Electromagnetic Thruster Systems
Gilland, J. H. (2006) · AIP conference proceedings · doi:10.1063/1.2169196 · Cited by 3
Thermal Design of a Self-Field Argon MPD Thruster by Numerical Calculation
Kawasaki, A., Kubota, K., Funaki, I., et al. (2013) · JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES · doi:10.2322/jjsass.61.167 · Cited by 3
Self-citationAnalysis of Self-field MPD Thrusters for Designing a Megawatt-class In-space Propulsion System
Funaki, I., Kubota, K., Kawasaki, A., et al. (2014) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference (JPC) · doi:10.2514/6.2014-3418 · Cited by 3
Self-citationIde, S., Koda, D., Tsukizaki, R., et al. (2019) · Review of Scientific Instruments · doi:10.1063/1.5088084 · Cited by 2
Characterization of a Quasi-Steady Self-Field MPD Thruster with Various Electrode Configurations
Tauchi, S., Oshio, Y., Kawasaki, A., et al. (2020) · AIAA SciTech Forum · doi:10.2514/6.2020-0191 · Cited by 1
Self-citationFabrication and Testing of Applied-Field Magneto Plasma Dynamic Thruster with Argon Propellant
Akash, C. H., Mahavishnc, M., Manikandan, E., et al. (2021) · International Journal of Vehicle Structures and Systems · doi:10.4273/ijvss.13.3.17 · Cited by 1
Research works printed but not linked: 1
- 1970, Emission Properties of Materials, 198
Cited by
Martens, P. D., Barton, D. A. W., Schartner, A. P., Charles, C., & Boswell, R. W. (2025) · Journal of Electric Propulsion · doi:10.1007/s44205-025-00115-3 · Cited by 4
Self-citationOshio, Y., Hirai, K., Watanabe, H., Horisawa, H., & Funaki, I. (2024) · doi:10.21203/rs.3.rs-5180086/v1 · Cited by 1
Self-citation
Metadata
- Authors
- Oshio, Y., Tauchi, S., Kawasaki, A., & Funaki, I.
- Affiliations
- Ryukoku University (JP)
- The Graduate University for Advanced Studies, SOKENDAI (JP)
- Nagoya University (JP)
- Japan Aerospace Exploration Agency (JP)
- Corresponding author
- Oshio, Yuya
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2021-11-03
- Volume
- 130
- Issue
- 17
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W3208662993
- Cited by
- 8
- References
- 30
- Citations by year
- 2025: 1 · 2024: 3 · 2023: 1 · 2022: 3
- FWCI
- 0.51
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Physics (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (20H05656)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
- Physical Sciences › Engineering › Aerospace Engineering › Electromagnetic Launch and Propulsion Technology
- Keywords
- magnetoplasmadynamic thruster, two-color pyrometer, high-power electric propulsion, plasma radiation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.