Monitoring the stability and degradation mechanisms of perovskite solar cells by in situ and operando characterization
Open accessThe DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
Abstract
Solar energy technologies are among the most promising renewable energy sources. The massive growth of global solar generating capacity to multi-terawatt scale is now a requirement to mitigate climate change. Perovskite solar cells (PSCs) are one of the most efficient and cost-effective photovoltaic (PV) technologies with efficiencies reaching the 26% mark. They have attracted substantial interest due to their light-harvesting capacity combined with a low cost of manufacturing. However, unsolved questions of perovskite stability are still a concern, challenging the potential of widespread commercialization. Thus, it is imperative to advance in the understanding of the degradation mechanism of PSCs under in situ and operando conditions where variable and unpredictable stressors intervene, in parallel or sequentially, on the device stability. This review aims to debate the advantages behind in situ and operando characterization to complement stability-testing of PV parameters in the strive to achieve competitive stability and reproducibility in PSCs. We consider the impact of applying single and multi-stressors under constant monitoring of alterations observed in PSC components or complete devices. We outline key future research directions to achieve the long-term stability necessary for the successful commercialization of this promising PV technology.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“HAADF-STEM contrast reveals that the high-intensity clusters are lead-rich, potentially including metallic Pb, PbX2, and CsPb2X5 phases37”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [37]
In the citing paper
“Under bias, inefficient hole injection and charge accumulation at the HTL interface intensify local electric fields and may promote halide ion redistribution, oxidation (particularly of Cl−) or volatilization17,37,49”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [37]
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Controlled growth of perovskite layers with volatile alkylammonium chlorides
Park, J., Kim, J., Yun, H.-S., Paik, M. J., Noh, E., Mun, H. J., Kim, M. G., Shin, T. J., & Seok, S. I. (2023) · Nature · doi:10.1038/s41586-023-05825-y · Cited by 1,990
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citationChristians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Cited by
Baumann, S., Eperon, G. E., Virtuani, A., Jeangros, Q., Kern, D. B., Barrit, D., Schall, J., Nie, W., Oreški, G., Khenkin, M., et al. (2024) · Energy & Environmental Science · doi:10.1039/d4ee01898b · Cited by 208
Brigida, V., Golik, V. I., Voitovich, E., Кукарцев, В. В., Gozbenko, V. E., Konyukhov, V. Y., & Oparina, T. A. (2024) · Resources · doi:10.3390/resources13020033 · Cited by 113
“This fact makes it particularly necessary to switch to sustainable geotechnologies [4–8].”
BackgroundStability and reliability of perovskite photovoltaics: Are we there yet?
Tanko, K. T., Tian, Z., Raga, S. R., Xie, H., Katz, E. A., & Lira‐Cantú, M. (2025) · MRS Bulletin · doi:10.1557/s43577-025-00863-5 · Cited by 50
Self-citationXu, Z., Chin, S., Park, B., Meng, Y., Kim, S., Han, S., Li, Y., Kim, D., Kim, B.-S., Lee, J., et al. (2024) · Next Materials · doi:10.1016/j.nxmate.2023.100103 · Cited by 47
Johnson, S. A., Morales, D., Fremouw, K., Gould, I. E., Borsa, T., Johnston, S. W., Palmstrom, A. F., DeCrescent, R. A., & McGehee, M. D. (2025) · Joule · doi:10.1016/j.joule.2025.102102 · Cited by 30
Strain in Halide Perovskites and Solar Cell Stability: Accelerated Stress Tests under Bias Voltage
Baumann, F. A. K., Karimipour, M., Padilla‐Pantoja, J., Chávez‐Ángel, E., Caicedo, J. M., Pouteaux, R., Ibarra, A. A., Raga, S. R., Santiso, J., & Lira‐Cantú, M. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c02822 · Cited by 28
Self-citationUstinova, M. I., Frolova, L. A., Rasmetyeva, A. V., Emelianov, N. A., Sarychev, M. N., Shilov, G. V., Kushch, P. P., Dremova, N. N., Kichigina, G. A., Kukharenko, A. I., et al. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta07598b · Cited by 28
Yimer, E. T., Lemu, H. G., & Tolcha, M. A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106113 · Cited by 27
Zhao, S., Zhou, S., Guo, Z., Luo, H., Jiang, Z., Lin, N., Chen, M., Li, L., & Li, C. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c01361 · Cited by 25
An AI-accelerated pathway for reproducible and stable halide perovskites
Hering, A. R., Sutter‐Fella, C. M., & Leite, M. S. (2025) · Chemical Society Reviews · doi:10.1039/d5cs00715a · Cited by 25
Moisture-resistant sustainable solar cell with RbGeI3 absorber layer
Raj, M., Aggarwal, A., Kushwaha, A., & Goel, N. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11002-5 · Cited by 24
Stability of Lead‐Free Perovskite Solar Cells
Barua, P., Elumalai, N. K., Uddin, A., Sonar, P. M., & Kannoorpatti, K. (2026) · Advanced Sustainable Systems · doi:10.1002/adsu.202600008 · Cited by 22
Loizos, M., Rogdakis, K., Parambil, A. P., Lira‐Cantú, M., & Kymakis, E. (2024) · APL Energy · doi:10.1063/5.0237386 · Cited by 21
Self-citationAlberti, A., Valastro, S., Nonni, E., Matteocci, F., Cinà, L., Carlo, A. D., & Magna, A. L. (2025) · ACS Energy Letters · doi:10.1021/acsenergylett.5c00232 · Cited by 20
Sharma, M., Parashar, M., Saini, D. K., Chen, H., Khanal, M. N., Fu, S., Durant, B. K., Whiteside, V. R., Byers, T. A., Yan, Y., et al. (2025) · Newton · doi:10.1016/j.newton.2025.100332 · Cited by 17
Intensity-Modulated Photocurrent Spectroscopy Measurements of High-Efficiency Perovskite Solar Cells
Neupane, G. R., Thon, S. M., Fu, S., Song, Z., Yan, Y., & Hamadani, B. H. (2024) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.3c03059 · Cited by 16
Thermal degradation in methylammonium–formamidinium–guanidinium lead iodide perovskites
Minussi, F. B., Silva, R. M., Carvalho, J. F., & Araújo, E. B. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc00395k · Cited by 15
Unified model for probing solar cell dynamics via cyclic voltammetry and impedance spectroscopy
Lopez‐Richard, V., Meneghetti, L. A., Nogueira, G. L., Hartmann, F., & Graeff, C. F. O. (2024) · Physical review. B./Physical review. B · doi:10.1103/physrevb.110.115306 · Cited by 15
Multimodal electron microscopy of halide perovskite interfacial dynamics
Li, X., Gu, Q., Huang, W., Fairclough, S. M., Friend, R. H., Stranks, S. D., Liu, T., & Ducati, C. (2026) · Nature · doi:10.1038/s41586-026-10238-8 · Cited by 14
“Under bias, inefficient hole injection and charge accumulation at the HTL interface intensify local electric fields and may promote halide ion redistribution, oxidation (particularly of Cl − ) or volatilization 17,37,49 .”
Ustinova, M. I., Rasmetyeva, A. V., Kukharenko, A. I., Lobanov, M. V., Kushch, P. P., Emelianov, N. A., Корчагин, Д. В., Kichigina, G. A., Sarychev, M. N., Kiryukhin, D. P., et al. (2024) · Materials Today Energy · doi:10.1016/j.mtener.2024.101687 · Cited by 14
Liu, J., Bì, H., Wang, L., Shen, Q., & Hayase, S. (2025) · Solar RRL · doi:10.1002/solr.202500409 · Cited by 14
Impedance spectroscopy in perovskite materials: From fundamentals to applications
Yadav, A. K., Pandey, R., & Singh, P. (2025) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2025.115524 · Cited by 14
Pai, N., Seeber, A., Tan, W. L., Sutherland, L. J., Easton, C. J., Yan, W., Gulia, Y., Gozukara, Y. M., Kim, J., Gao, M., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202510544 · Cited by 13
High‐Efficiency Bifacial Perovskite Solar Cell With Optimization of Tilt Angle and Albedo
Aggarwal, A., Raj, M., Batra, S., Kushwaha, A., & Goel, N. (2026) · Advanced Theory and Simulations · doi:10.1002/adts.70406 · Cited by 13
Tanko, K. T., Raga, S. R., Vahedigharehchopogh, N., Baumann, F. A. K., Karimipour, M., Miranda‐Gamboa, R., & Lira‐Cantú, M. (2025) · Solar RRL · doi:10.1002/solr.202500162 · Cited by 11
Self-citationTobe, T., Shibayama, N., Nakamura, Y., Ikegami, M., Kanda, H., & Miyasaka, T. (2024) · Chemistry - An Asian Journal · doi:10.1002/asia.202400686 · Cited by 10
Perovskite Solar Cells: Fundamental to Commercialization
Kumar, P., Mahapatra, A., & Pradhan, B. (2024) · Engineering materials · doi:10.1007/978-3-031-57663-8_6 · Cited by 9
Electric-field-induced aging dynamics of triple-cation lead iodide perovskite at nanoscale
Emelianov, N. A., Ozerova, V. V., Fedotov, Y. S., Shchurik, E. V., Slesarenko, N. A., Zhidkov, M. V., Golosov, E. V., Saifutyarov, R. R., Frolova, L. A., & Troshin, P. A. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.113305 · Cited by 9
Effects of long-term storage on properties of perovskite solar cells
Murakami, Y., Kanaya, S., & Okumura, T. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.05.010 · Cited by 7
Hanmandlu, C., Banerjee, S., Kumar, A., Ansari, Z. A., Kumar, R., Wang, Y., Yuan, L., Li, S., Sanker, R. A., Gantepogu, C. S., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.158070 · Cited by 6
Encapsulation for perovskite integrated devices and multi-scenario applications
Li, Q., Yang, W., Zhu, A., Cai, H., Wang, B., Wang, B., Li, F., Liu, X., Zhang, N., Yang, S., et al. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2025.10.005 · Cited by 5
Stability investigations of triple halide perovskite: A detailed study using angle-resolved XPS
Mahamudujjaman, M., Pyakurel, S., & Geerts, W. J. (2025) · MRS Advances · doi:10.1557/s43580-025-01381-x · Cited by 4
Practical Interfaces for High‐Performance Perovskite Solar Cells
Shi, Y. C., Hu, W., Yue, Q., Lin, Z., Zhang, B., Jiang, S., Mei, A., & Han, H. (2026) · Solar RRL · doi:10.1002/solr.202500925 · Cited by 4
“Accelerated aging tests, simulating extreme service environments such as damp heat and illumination, shorten degradation pathways, while non-in situ analyses compare interfacial composition and structure before and after aging to identify degradation origins and guide stabilization strategies [203].”
Alamban, A., Ahmad, M., & Rolston, N. (2024) · Nanomaterials · doi:10.3390/nano14141184 · Cited by 3
“However, mixed-halide iodide–bromide perovskites routinely face halide segregation under light exposure and susceptibility to moisture and heat-based decomposition [15,16].”
BackgroundSelf-doping and radiation stability in partial Ge substituted lead halide perovskites
Zhidkov, I. S., Ustinova, M. I., Gerasimov, M. F., Kukharenko, A. I., Sarychev, M. N., Nikiforov, S. V., Cholakh, S. O., Frolova, L. A., Kurmaev, E. Z., & Troshin, P. A. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.185762 · Cited by 3
Outdoor Measurements of Perovskite Modules
Ellis, H., Müllejans, H., & Dunlop, E. D. (2026) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.70073 · Cited by 3
Schall, J., Xu, L., Glaws, A., Nag, A., Kern, D. B., & Ugirumurera, J. (2026) · Solar RRL · doi:10.1002/solr.70370 · Cited by 3
Ruellou, J., Ahouari, H., Courty, M., Vezin, H., & Sauvage, F. (2025) · EES solar. · doi:10.1039/d4el00003j · Cited by 3
Progress in atomic layer deposition of metal oxides for efficient and stable perovskite solar cells
Park, P. J., Jo, H. J., Han, S. M., Kim, Y. J., & Kim, S. Y. (2026) · Microstructures · doi:10.20517/microstructures.2025.138 · Cited by 2
Understanding and engineering metal halide perovskite memristors: Progress and perspectives
Subhani, W. S., Faheem, M. B., Aljalal, A., Harrabi, K., & Qiao, Q. (2026) · APL Energy · doi:10.1063/5.0320703 · Cited by 2
Characterization and Degradation of Perovskite Mini-Modules
Ebner, R., Mittal, A., Újvári, G., Hadjipanayi, M., Paraskeva, V., Georghiou, G. E., Hadipour, A., Aguirre, A., & Aernouts, T. (2024) · Inorganics · doi:10.3390/inorganics12080219 · Cited by 2
Valenta, J., Greben, M., Takagi, T., & Vácha, M. (2026) · ACS Nano · doi:10.1021/acsnano.6c02074 · Cited by 1
Jha, R. K. (2026) · Next Energy · doi:10.1016/j.nxener.2026.100811 · Cited by 1
Interfacial Engineering Strategies of Self-Assembled Monolayers for Inverted Perovskite Solar Cells
Ge, Y., Wang, K., Yu, R., & Tan, Z. (2026) · Nanomaterials · doi:10.3390/nano16160989 · Cited by 1
“As a result, they are insufficient for resolving the dynamic evolution of SAM interfaces under real device-operation conditions [68].”
Enhancing a Perovskite Solar Cell and Module by Suppressing Protonation through Chelating Agents
Liu, H., Gao, Y., Jiao, Y., Cao, Y., Wu, S., & Mai, Y. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c21673 · Cited by 1
Sikora, A., & Witos, Ł. (2024) · Applied Sciences · doi:10.3390/app14083503
Ruddlesden-Popper Perovskites for Stable and Transparent Building-Integrated Photovoltaic Materials
Alamban, A., Ahmad, M., & Rolston, N. (2024) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc57443.2024.10749137
“Mixed halide methylammonium lead iodide-bromide perovskites routinely face halide segregation, hydration, decomposition, and other degradation mechanisms [6].”
Lee, T. J., Tan, C. H., Ng, C. Y., Islam, M. A., Lee, H. W., Voon, C. H., & Low, F. W. (2025) · International Journal of Nanoelectronics and Materials (IJNeaM) · doi:10.58915/ijneam.v18i4.2616
“Regarding the stability of the buffer layer or devices, X-ray photoelectron spectroscopy can investigate thermal and moisture-induced reactive pathways [57].”
Deniz, E. (2024) · eScholarship (California Digital Library)
Punithaveni, B., Nithyaprakash, D., & Bharathi, M. (2026) · International Research Journal of Multidisciplinary Technovation · doi:10.54392/irjmt2634
“Under high humidity conditions (~80% RH), surface changes can begin within four hours [42].”
Mendoza-Pérez, R., Sastre-Hernández, J., Aguilar-Hernández, J., Díaz-Segura, E. S., Del-Oso, J.-A., Sanchez, M., Ramos-Vilchis, C., Dutt, A., & Santana, G. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.05.099
Role of liquid water distribution in MgO hydroxylation
Starchenko, V., Adapa, S. K. R., Anovitz, L. M., Ivanov, I., Stack, A. G., Yuan, K., & Weber, J. (2026) · CrystEngComm · doi:10.1039/d6ce00207b
A Lightweight ML Service Pipeline for Label-Free Industrial Degradation Monitoring
Varapuzhakaran, L. T., Dong, Z., Chun, H. W., Kim, J. H., Lee, Y. C., & Kim, J. (2026) · IEEE International Conference on Software Services Engineering (SSE) · doi:10.1109/sse72781.2026.00035
“Photoluminescence (PL) imaging provides spatially resolved maps of material quality [6], offering an ideal sensor modality to evaluate unsupervised feature discovery under extreme data scarcity.”
Vega-Fleitas, E., Moll-López, S., Moraño, J.-A., & Herrero-Debón, A. (2026) · Solar Energy · doi:10.1016/j.solener.2026.115190
Ahmadi, N. (2026) · CRC Press eBooks · doi:10.1201/9781003751977
Beyond bandgap tunability: controlling quantum-dot solids for efficient solar cells
Ullah, M. I., & Duan, C. (2026) · Energy Materials · doi:10.20517/energymater.2026.259
Metadata
- Authors
- Baumann, F., Raga, S. R., & Lira-Cantú, M.
- Affiliations
- Universitat Autònoma de Barcelona (ES)
- Nanostructured Materials for Photovoltaic Energy Group (NMPE), Catalan Institute of Nanoscience and Nanotechnology (ICN2), Nanostructured Materials for Photovoltaic Energy Group, Autonomous University of Barcelona (UAB) , Bellaterra, Barcelona 08193, Spain
- Venue
- APL Energy
- Publisher
- AIP Publishing
- Published
- 2023-04-24
- Volume
- 1
- Issue
- 1
- ISSN
- 2770-9000 (ISSN-L)
- OpenAlex
- W4376110731
- Semantic Scholar
- fa375a734d9ba9325c88224929d9398ee1654812
- Cited by
- 48
- References
- 128
- Citations by year
- 2026: 15 · 2025: 15 · 2024: 18
- FWCI
- 3.57
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor)
- creativecommons.org/licenses/by/4.0/ (tdm)
- Locations
- APL Energy (publishedVersion, cc-by)
- Dipòsit Digital de Documents de la UAB (Universitat Autònoma de Barcelona) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Fundación Carmen y Severo Ochoa (SEV-2017-0706)
- Agencia Estatal de Investigación (PCI2020-112185, PID2021-122349OA-I00, SEV-2017-0706, CEX2021-001214-S, PRE2020-092669)
- Agència de Gestió d’Ajuts Universitaris i de Recerca (2021 SGR 01617)
- “la Caixa” Foundation (LCF/BQ/PI20/11760024)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
- Keywords
- perovskite solar cells, device stability, degradation mechanism, in situ characterization, operando characterization, long-term stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.