On the mechanical behavior of WS 2 nanotubes under axial tension and compression
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The mechanical properties of materials and particularly the strength are greatly affected by the presence of defects; therefore, the theoretical strength (≈10% of the Young's modulus) is not generally achievable for macroscopic objects. On the contrary, nanotubes, which are almost defect-free, should achieve the theoretical strength that would be reflected in superior mechanical properties. In this study, both tensile tests and buckling experiments of individual WS 2 nanotubes were carried out in a high-resolution scanning electron microscope. Tensile tests of MoS 2 nanotubes were simulated by means of a density-functional tight-binding-based molecular dynamics scheme as well. The combination of these studies provides a microscopic picture of the nature of the fracture process, giving insight to the strength and flexibility of the WS 2 nanotubes (tensile strength of ≈16 GPa). Fracture analysis with recently proposed models indicates that the strength of such nanotubes is governed by a small number of defects. A fraction of the nanotubes attained the theoretical strength indicating absence of defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Timoshenko, S. P. (1936) · UCLA Biblioteca de Ingenieria Civil · Cited by 7,592
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Chopra, N. G., Luyken, R. J., Cherrey, K., Crespi, V. H., Cohen, M. L., Louie, S. G., & Zettl, A. (1995) · Science · doi:10.1126/science.269.5226.966 · Cited by 3,102
Tensile Loading of Ropes of Single Wall Carbon Nanotubes and their Mechanical Properties
Yu, M.-F., Files, B. S., Arepalli, S., & Ruoff, R. S. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.5552 · Cited by 2,696
Porezag, D., Frauenheim, T., Köhler, T., Seifert, G., & Kaschner, R. (1995) · Physical Review B · doi:10.1103/physrevb.51.12947 · Cited by 2,201
Self-citationPolyhedral and cylindrical structures of tungsten disulphide
Tenne, R., Margulis, L., Genut, M., & Hodes, G. (1992) · Nature · doi:10.1038/360444a0 · Cited by 2,002
Self-citationMaterials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
High-Rate, Gas-Phase Growth of MoS 2 Nested Inorganic Fullerenes and Nanotubes
Feldman, Y., Wasserman, E., Srolovitz, D. J., & Tenne, R. (1995) · Science · doi:10.1126/science.267.5195.222 · Cited by 1,214
Self-citation
Cited by
Stretching and Breaking of Ultrathin MoS2
Bertolazzi, S., Brivio, J., & Kis, A. (2011) · ACS Nano · doi:10.1021/nn203879f · Cited by 2,680
Feng, J., Sun, X., Wu, C., Peng, L., Lin, C., Hu, S., Yang, J., & Xie, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207176c · Cited by 1,143
Liu, K., Yan, Q., Chen, M., Fan, W., Sun, Y., Suh, J., Fu, D., Lee, S., Zhou, J., Tongay, S., et al. (2014) · Nano Letters · doi:10.1021/nl501793a · Cited by 686
He, J., Hummer, K., & Franchini, C. (2014) · Physical Review B · doi:10.1103/physrevb.89.075409 · Cited by 564
Komsa, H.-P., & Krasheninnikov, A. V. (2013) · Physical Review B · doi:10.1103/physrevb.88.085318 · Cited by 477
Inorganic nanotubes and fullerene-like nanoparticles
Tenne, R. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.62 · Cited by 462
Self-citationPiezoresistivity and Strain-induced Band Gap Tuning in Atomically Thin MoS2
Manzeli, S., Allain, A., Ghadimi, A., & Kis, A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01689 · Cited by 385
Transition Metal Chalcogenides: Ultrathin Inorganic Materials with Tunable Electronic Properties
Heine, T. (2015) · Accounts of Chemical Research · doi:10.1021/ar500277z · Cited by 369
Self-citationStacking in Bulk and Bilayer Hexagonal Boron Nitride
Constantinescu, G., Kuc, A., & Heine, T. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.036104 · Cited by 345
Self-citationStrain-dependent modulation of conductivity in single-layer transition-metal dichalcogenides
Ghorbani-Asl, M., Borini, S., Kuc, A., & Heine, T. (2013) · Physical Review B · doi:10.1103/physrevb.87.235434 · Cited by 313
Self-citationTwo Dimensional Materials Beyond MoS2: Noble‐Transition‐Metal Dichalcogenides
Miró, P., Ghorbani‐Asl, M., & Heine, T. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309280 · Cited by 264
Self-citationCharged Carbon Nanomaterials: Redox Chemistries of Fullerenes, Carbon Nanotubes, and Graphenes
Clancy, A. J., Bayazit, M. K., Hodge, S. A., Skipper, N. T., Howard, C. A., & Shaffer, M. S. P. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00128 · Cited by 256
Extreme strength observed in limpet teeth
Barber, A. H., Lu, D., & Pugno, N. M. (2015) · Journal of the Royal Society Interface · doi:10.1098/rsif.2014.1326 · Cited by 212
“AFM has been applied to uniaxial testing of individual nanofibrous materials, including mineralized collagen fibrils [20], polymer nanofibres [21] and nanotubes [22,23], and relies on integration of AFM with scanning electron microscopy (SEM) in order to manipulate and observe relatively small material volumes for ten…”
MethodElectromechanics in MoS2 and WS2: nanotubes vs. monolayers
Ghorbani-Asl, M., Zibouche, N., Wahiduzzaman, M., Oliveira, A. F., Kuc, A., & Heine, T. (2013) · Scientific Reports · doi:10.1038/srep02961 · Cited by 178
Self-citation
Metadata
- Authors
- Kaplan-Ashiri, I., Cohen, S. R., Gartsman, K., Ivanovskaya, V., Heine, T., Seifert, G., Wiesel, I., Wagner, H. D., & Tenne, R.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2006-01-09
- Volume
- 103
- Issue
- 3
- Pages
- 523-528
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2096751327
- Cited by
- 282
- References
- 21
- FWCI
- 11.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.