The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High-strength cellular ceramic composites with 3D microarchitecture
Open accessAbstract
Significance: It has been a long-standing effort to create materials with low density but high strength. Technical foams are very light, but compared with bulk materials, their strength is quite low because of their random structure. Natural lightweight materials, such as bone, are cellular solids with optimized architecture. They are structured hierarchically and actually consist of nanometer-size building blocks, providing a benefit from mechanical size effects. In this paper, we demonstrate that materials with a designed microarchitecture, which provides both structural advantages and size-dependent strengthening effects, may be fabricated. Using 3D laser lithography, we produced micro-truss and -shell structures from ceramic–polymer composites that exceed the strength-to-weight ratio of all engineering materials, with a density below 1,000 kg/m 3 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922 · cited 6×
“To induce strong mechanical size effects in ceramics, material thicknesses are required to be in the range of a few nanometers (16) (compare Fig.”
BackgroundInfluentialUltralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784 · cited 1×
“Recent improvements in material processing methods have led to cellular materials of extremely low density with a periodic microarchitecture (24).”
BackgroundFoam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
LVIII. The limits of economy of material in frame-structures
Michell, A. G. M. (1904) · The London Edinburgh and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440409463229 · Cited by 1,390
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Bones: Structure and Mechanics
Currey, J. D. (2002) · Cited by 1,125
L. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Bones: Structure and Mechanics
Currey, J. D. (2002) · Princeton University Press eBooks · doi:10.1515/9781400849505 · Cited by 1,000
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Wolff, J. (1986) · Springer eBooks · doi:10.1007/978-3-642-71031-5 · Cited by 802
Mineralized Collagen Fibrils: A Mechanical Model with a Staggered Arrangement of Mineral Particles
Jäger, I., & Fratzl, P. (2000) · Biophysical Journal · doi:10.1016/s0006-3495(00)76426-5 · Cited by 793
Richerson, D. W. (2005) · CRC Press eBooks · doi:10.1201/b18952 · Cited by 685
Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography
Bückmann, T., Stenger, N., Kadic, M., Kaschke, J., Frölich, A., Kennerknecht, T., Eberl, C., Thiel, M., & Wegener, M. (2012) · Advanced Materials · doi:10.1002/adma.201200584 · Cited by 665
The limits of economy of material in frame structures
Michell, A. G. M. (1904) · Medical Entomology and Zoology · Cited by 641
Fabrication and deformation of three-dimensional hollow ceramic nanostructures
Jang, D., Meza, L. R., Greer, F., & Greer, J. R. (2013) · Nature Materials · doi:10.1038/nmat3738 · Cited by 495
Timber, its nature and behaviour
Dinwoodie, J. M. (1981) · Thammasat University Digital Collections · Cited by 467
Plasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
Self-citationOn the Calculation of the Equilibrium and Stiffness of Frames
(2011) · The Scientific Papers of James Clerk Maxwell · doi:10.1017/cbo9780511698095.029 · Cited by 416
Three‐Dimensional Nanostructures for Photonics
von Freymann, G., Ledermann, A., Thiel, M., Staude, I., Essig, S., Busch, K., & Wegener, M. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901838 · Cited by 352
Role of Grain Size in the Strength and R‐Curve Properties of Alumina
Chantikul, P., Bennison, S. J., & Lawn, B. R. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb07607.x · Cited by 347
The mechanical behaviour of some molluscan hard tissues
Currey, J. D., & Taylor, J. D. (1974) · Journal of Zoology · doi:10.1111/j.1469-7998.1974.tb04122.x · Cited by 307
Graded Microstructure and Mechanical Properties of Human Crown Dentin
Tesch, W., Eidelman, N., Roschger, P., Goldenberg, F., Klaushofer, K., & Fratzl, P. (2001) · Calcified Tissue International · doi:10.1007/s00223-001-2012-z · Cited by 263
Micro‐scale Truss Structures formed from Self‐Propagating Photopolymer Waveguides
Jacobsen, A. J., Barvosa‐Carter, W., & Nutt, S. (2007) · Advanced Materials · doi:10.1002/adma.200700797 · Cited by 172
Multiphoton polymerization of hybrid materials
Farsari, M., Vamvakaki, M., & Chichkov, B. N. (2010) · Journal of Optics · doi:10.1088/2040-8978/12/12/124001 · Cited by 161
Valdevit, L., Jacobsen, A. J., Greer, J. R., & Carter, W. B. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04599.x · Cited by 142
Research works printed but not linked: 9
- 10.2307/2446321 · doi:10.2307/2446321
- C Mattheck The Face of Failure in Nature and Engineering (Karlsruhe Inst Technology, Karlsruhe, Germany, 2004).
- AG Bell, The tetrahedral principle in kite structure. Natl Geogr Mag 14, 219–251 (1903).
- F Riley Structural Ceramics Fundamentals and Case Studies (Cambridge Univ Press, Cambridge, UK), pp. 137–145 (2009).
- 10.1016/B978-075067219-1/50006-4 · doi:10.1016/b978-075067219-1/50006-4
- ; CES EduPack MaterialUniverse:\Hybrids: composites foams honeycombs natural materials\Foams (Granta Design Ltd Cambridge UK). Available at www.grantadesign.com/. Accessed October 10 2013. (2012).
- 10.1016/j.ceramint.2013.09.057 · doi:10.1016/j.ceramint.2013.09.057
- J Wiedemann Leichtbau Elemente und Konstruktion (Springer, 3rd Ed, Berlin), pp. 562–573 (2007).
- ; Nanoscribe GmbH Safety Data Sheet: IP-Dip Photoresist (Nanoscribe GmbH, Karlsruhe, Germany, 2013).
Cited by
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Efficient proximity labeling in living cells and organisms with TurboID
Branon, T. C., Bosch, J. A., Sanchez, A. D., Udeshi, N. D., Svinkina, T., Carr, S. A., Feldman, J. L., Perrimon, N., & Ting, A. Y. (2018) · Nature Biotechnology · doi:10.1038/nbt.4201 · Cited by 2,174
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Ultrafast laser processing of materials: from science to industry
Malinauskas, M., Žukauskas, A., Hasegawa, S., Hayasaki, Y., Mizeikis, V., Buividas, R., & Juodkazis, S. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.133 · Cited by 1,364
Metadata
- Authors
- Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O.
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2014-02-03
- Volume
- 111
- Issue
- 7
- Pages
- 2453-2458
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2094751519
- Cited by
- 563
- References
- 33
- FWCI
- 49.87
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.