The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Anomalous scaling law of strength and toughness of cellulose nanopaper
Open accessAbstract
Significance: A long-standing challenge in material design is to overcome the conflict between strength and toughness, because they are generally mutually exclusive. To address this challenge, we rationally design cellulose-based nanopaper and investigate the dependence of their mechanical properties on constituent cellulose fiber size. Surprisingly, we find that both the strength and toughness of the nanopaper increase simultaneously (40 and 130 times, respectively) as the average diameter of constituent cellulose fibers decreases from 27 μm to 11 nm, suggesting the promising potential toward an anomalous but highly desirable scaling law: the smaller, the stronger and the tougher. There are abundant opportunities to use the fundamental bottom-up strategy to design a novel class of functional materials that are both strong and tough.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756 · cited 1×
“Cellulose has appealing mechanical properties, with specific modulus [∼100 GPa/(g/cm(3))] and specific strength [∼4 GPa/(g/cm(3))] higher than most metals and composites, and many ceramics, making it as a promising building block for functional and structural materials (27).”
BackgroundNanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Ultrahigh Strength and High Electrical Conductivity in Copper
Lu, L., Shen, Y., Chen, X., Qian, L., & Lu, K. (2004) · Science · doi:10.1126/science.1092905 · Cited by 3,366
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Perspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625
Rupture of rubber. I. Characteristic energy for tearing
Rivlin, R. S., & Thomas, A. G. (1953) · Journal of Polymer Science · doi:10.1002/pol.1953.120100303 · Cited by 1,577
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Designing metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
Carbon Nanotube Thin Films: Fabrication, Properties, and Applications
Hu, L., Hecht, D. S., & Grüner, G. (2010) · Chemical Reviews · doi:10.1021/cr9002962 · Cited by 997
Self-citationOptically Transparent Composites Reinforced with Networks of Bacterial Nanofibers
Yano, H., Sugiyama, J., Nakagaito, A. N., Nogi, M., Matsuura, T., Hikita, M., & Handa, K. (2005) · Advanced Materials · doi:10.1002/adma.200400597 · Cited by 975
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Ritchie, R. O. (1988) · Materials Science and Engineering: A · doi:10.1016/0025-5416(88)90547-2 · Cited by 874
Zhu, T., & Li, J. (2010) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.001 · Cited by 828
On the Mechanistic Origins of Toughness in Bone
Launey, M. E., Buehler, M. J., & Ritchie, R. O. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104427 · Cited by 741
Mechanistic fracture criteria for the failure of human cortical bone
Nalla, R. K., Kinney, J. H., & Ritchie, R. O. (2003) · Nature Materials · doi:10.1038/nmat832 · Cited by 730
Jang, D., & Greer, J. R. (2010) · Nature Materials · doi:10.1038/nmat2622 · Cited by 722
Demetriou, M. D., Launey, M. E., Garrett, G., Schramm, J. P., Hofmann, D. C., Johnson, W. L., & Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat2930 · Cited by 676
Zhu, H., Jia, Z., Chen, Y., Weadock, N., Wan, J., Vaaland, O., Han, X., Li, T., & Hu, L. (2013) · Nano Letters · doi:10.1021/nl400998t · Cited by 612
Self-citationThe true toughness of human cortical bone measured with realistically short cracks
Koester, K. J., Ager, J. W., & Ritchie, R. O. (2008) · Nature Materials · doi:10.1038/nmat2221 · Cited by 558
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
Self-citationShear bands and cracking of metallic glass plates in bending
Conner, R. D., Johnson, W. L., Paton, N. E., & Nix, W. D. (2003) · Journal of Applied Physics · doi:10.1063/1.1582555 · Cited by 403
Radio-frequency plasma functionalization of carbon nanotubes surface O2, NH3, and CF4 treatments
Felten, A., Bittencourt, C., Pireaux, J., Lier, G. V., & Charlier, J. (2005) · Journal of Applied Physics · doi:10.1063/1.2071455 · Cited by 384
Chinga-Carrasco, G. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-417 · Cited by 359
Nanoscale Deformation Mechanisms in Bone
Gupta, H. S., Wagermaier, W., Zickler, G. A., Raz-Ben Aroush, D., Funari, S. S., Roschger, P., Wagner, H. D., & Fratzl, P. (2005) · Nano Letters · doi:10.1021/nl051584b · Cited by 350
First-principles and classical molecular dynamics simulation of shocked polymers
Mattsson, T. R., Lane, J. M. D., Cochrane, K. R., Desjarlais, M. P., Thompson, A. P., Pierce, F., & Grest, G. S. (2010) · Physical Review B · doi:10.1103/physrevb.81.054103 · Cited by 333
Walther, A., Timonen, J. V. I., Díez, I., Laukkanen, A., & Ikkala, O. (2011) · Advanced Materials · doi:10.1002/adma.201100580 · Cited by 279
Epitaxial nanotwinned Cu films with high strength and high conductivity
Anderoglu, O., Misra, A., Wang, H., Ronning, F., Hundley, M. F., & Zhang, X. (2008) · Applied Physics Letters · doi:10.1063/1.2969409 · Cited by 235
Novel transparent nanocomposite films based on chitosan and bacterial cellulose
Fernandes, S. C. M., Oliveira, L., Freire, C. S. R., Silvestre, A. J. D., Neto, C. P., Gandini, A., & Desbriéres, J. (2009) · Green Chemistry · doi:10.1039/b919112g · Cited by 232
Wood cellulose biocomposites with fibrous structures at micro- and nanoscale
Sehaqui, H., Allais, M., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.007 · Cited by 185
Plant Fibres for Textile and Technical Applications
Sfiligoj, M. S., Hribernik, S., Stana, K., & Kree, T. (2013) · InTech eBooks · doi:10.5772/52372 · Cited by 161
Yuan, W. Z., Sun, J. Z., Dong, Y., Häussler, M., Yang, F., Xu, H. P., Qin, A., Lam, J. W. Y., Zheng, Q., & Tang, B. Z. (2006) · Macromolecules · doi:10.1021/ma061856c · Cited by 159
Advances in Agrophysical Research
Grundas, S., & Stępniewski, A. (2013) · InTech eBooks · doi:10.5772/3341 · Cited by 157
Rising crack-growth-resistance behavior in cortical bone:
Vashishth, D. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.11.003 · Cited by 149
Greensmith, H. W., Mullins, L., & Thomas, A. G. (1960) · Transactions of the Society of Rheology · doi:10.1122/1.548870 · Cited by 137
Juntaro, J., Pommet, M., Kalinka, G., Mantalaris, A., Shaffer, M. S. P., & Bismarck, A. (2008) · Advanced Materials · doi:10.1002/adma.200703176 · Cited by 130
Hybridizing wood cellulose and graphene oxide toward high-performance fibers
Li, Y., Zhu, H., Zhu, S., Wan, J., Liu, Z., Vaaland, O., Lacey, S. D., Fang, Z., Dai, H., Li, T., et al. (2015) · NPG Asia Materials · doi:10.1038/am.2014.111 · Cited by 112
Self-citationSinko, R., & Keten, S. (2015) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2015.02.012 · Cited by 70
Fracture toughness and crack-resistance curve behavior in metallic glass-matrix composites
Launey, M. E., Hofmann, D. C., Suh, J., Kozachkov, H., Johnson, W. L., & Ritchie, R. O. (2009) · Applied Physics Letters · doi:10.1063/1.3156026 · Cited by 69
Atomistic Simulation of Frictional Sliding Between Cellulose Iβ Nanocrystals
Wu, X., Moon, R. J., & Martini, A. (2013) · Tribology Letters · doi:10.1007/s11249-013-0223-x · Cited by 20
Cited by
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Self-citationProcessing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Self-citationWood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Self-citationStructure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Self-citationKlemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Metadata
- Authors
- Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2015-07-06
- Volume
- 112
- Issue
- 29
- Pages
- 8971-8976
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W1870503235
- Cited by
- 424
- References
- 48
- FWCI
- 5.96
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.