From closed-loop to sustainable supply chains: the WEEE case
Open accessThe DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
The primary objective of closed-loop supply chains (CLSC) is to improve the maximum economic benefit from end-of-use products. Nevertheless, the literature within this stream of research advocates that closing the loop also helps to mitigate the undesirable environmental footprint of supply chains. Therefore, closed-loop supply chains are assumed to be sustainable supply chains almost by definition. In this paper we analyse if and when this assumption holds. We illustrate our findings based on the Electric and Electronic Equipment (EEE) supply chain. For all phases of the supply chain, i.e. manufacturing, usage, transportation and end-of-life activities, we assess the magnitude of the environmental impacts, based on a single environmental metric, namely the Cumulative Energy Demand (CED). Given the environmental hot-spots in the Electric and Electronic Equipment supply chain, we propose useful extensions for existing CLSC optimisation models to ensure that closed-loop supply chains are at the same time sustainable supply chains.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1993) · Journal of the American Dietetic Association · doi:10.1016/0002-8223(93)91697-o · Cited by 18,154
Green and competitive: ending the stalemate
(1995) · Long Range Planning · doi:10.1016/0024-6301(95)99997-e · Cited by 3,848 · cited 1×
“Some 10 years ago we witnessed a hot discussion between those advocating environmental improvement as a driver of competitive advantage (Gore 1991, Porter and Vanderlinde 1995) and those advocating that substantial improvements for the environment are only achievable via substantial investment with…”
Background(1994) · Journal of the American Dietetic Association · doi:10.1016/0002-8223(94)92388-4 · Cited by 3,123
Do green supply chains lead to competitiveness and economic performance?
Rao, P., & Holt, D. (2005) · International Journal of Operations & Production Management · doi:10.1108/01443570510613956 · Cited by 2,453 · cited 1×
“The literature from the last decade provides some examples of the good alignment between business and the environment in supply chains (e.g. Rao and Holt 2005).”
BackgroundMultiobjective Decision Making: Theory and Methodology
Chankong, V., & Haimes, Y. Y. (1983) · Medical Entomology and Zoology · Cited by 2,371
Corporate strategy: the quest for parenting advantage
(1995) · Long Range Planning · doi:10.1016/0024-6301(95)91637-7 · Cited by 1,751
Sustainable supply chains: An introduction
Linton, J. D., Klassen, R., & Jayaraman, V. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.012 · Cited by 1,746 · cited 4×
“However, it also becomes clear that it is not sensible to apply all of the models to every product, and it can even be counterproductive to extend the supply chain with regard to all the processes presented by Linton et al. (2007).”
BackgroundInfluentialStrategic Issues in Product Recovery Management
Thierry, M., Salomon, M., Van Nunen, J., & Van Wassenhove, L. (1995) · California Management Review · doi:10.2307/41165792 · Cited by 1,437 · cited 1×
“1995 ) include re-use, testing, repairing, disassembling, refurbishing, remanufacturing, recycling and energy recovery (the reverse chain in Figure 1 ).”
MethodSelf-citationWalley, N., & Whitehead, B. W. (1994) · Harvard business review · Cited by 1,428
Assessing a set of additive utility functions for multicriteria decision-making, the UTA method
Jacquet-Lagrèze, E., & Siskos, J. (1982) · European Journal of Operational Research · doi:10.1016/0377-2217(82)90155-2 · Cited by 1,288 · cited 2×
“The second part consists of the so-called interactive method, e.g. ELECTRE (Roy 1968), STEM (Benayoun et al. 1971), Pareto Race (Korhonen and Wallenius 1988), and UTA (Jacquet-Lagreze and Siskos 1982).”
BackgroundMethodIssues in environmentally conscious manufacturing and product recovery: a survey
Gungor, A., & Gupta, S. M. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00167-9 · Cited by 1,107
Classement et choix en présence de points de vue multiples
Roy, B. (1968) · Revue française d'informatique et de recherche opérationnelle · doi:10.1051/ro/196802v100571 · Cited by 944
Linear programming with multiple objective functions: Step method (stem)
Benayoun, R., de Montgolfier, J., Tergny, J., & Laritchev, O. (1971) · Mathematical Programming · doi:10.1007/bf01584098 · Cited by 923 · cited 1×
“The second part consists of the so-called interactive method, e.g. ELECTRE (Roy 1968), STEM (Benayoun et al. 1971), Pareto Race (Korhonen and Wallenius 1988), and UTA (Jacquet-Lagreze and Siskos 1982).”
MethodTHE IMPACT OF PRODUCT RECOVERY ON LOGISTICS NETWORK DESIGN
FLEISCHMANN, M., BEULLENS, P., BLOEMHOF‐RUWAARD, J. M., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00076.x · Cited by 833
A characterisation of logistics networks for product recovery
Fleischmann, M., Krikke, H. R., Dekker, R., & Flapper, S. D. P. (2000) · Omega · doi:10.1016/s0305-0483(00)00022-0 · Cited by 786
Product life cycle cost analysis: State of the art review
Asiedu, Y., & Gu, P. (1998) · International Journal of Production Research · doi:10.1080/002075498193444 · Cited by 672 · cited 2×
“However, other approaches such as Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) have to be added, and some of the reverse logistics models should be extended in order to consider not only economic but also ecological aspects.”
MethodCompetitive Environmental Strategies: When Does it Pay to Be Green?
Orsato, R. J. (2006) · California Management Review · doi:10.2307/41166341 · Cited by 650 · cited 4×
“Situations where business and environmental objectives are perfectly aligned are called ‘win–win’, ‘doubledividend’, ‘free-lunch’ (Orsato 2006), or ‘low hanging fruit’ situations.”
BackgroundInfluentialMatos, S., & Hall, J. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.013 · Cited by 605 · cited 3×
“A popular definition states that sustainable supply chains require coordination of the social, environmental and economic dimensions (the triple bottom line) (see, eg, Matos and Hall 2007 ).”
BackgroundInfluentialThe International Journal of Life Cycle Assessment
(2013) · The International Journal of Life Cycle Assessment · doi:10.1007/11367.1614-7502 · Cited by 552
The Challenge of Closed-Loop Supply Chains
Guide, V. D. R., Harrison, T. P., & Van Wassenhove, L. N. (2003) · Interfaces · doi:10.1287/inte.33.6.3.25182 · Cited by 498
The design of reverse distribution networks: Models and solution procedures
Jayaraman, V., Patterson, R. A., & Rolland, E. (2003) · European Journal of Operational Research · doi:10.1016/s0377-2217(02)00497-6 · Cited by 473
Computers & Industrial Engineering
Lee, C., Wang, Y., & Trappey, A. J. C. (2015) · Cited by 436
Supply-Chain Management for Recoverable Manufacturing Systems
Guide, V. D. R., Jayaraman, V., Srivastava, R., & Benton, W. C. (2000) · Interfaces · doi:10.1287/inte.30.3.125.11656 · Cited by 414
Concurrent product and closed-loop supply chain design with an application to refrigerators
Krikke, H., Bloemhof-Ruwaard, J., & Van Wassenhove, L. N. (2003) · International Journal of Production Research · doi:10.1080/0020754031000120087 · Cited by 392 · cited 1×
“Krikke et al. (2003) use a multi-objective optimisation model with three criteria: network costs, energy use, and waste volume.”
MethodDisassembly sequencing: A survey
Lambert, A. J. D. (2003) · International Journal of Production Research · doi:10.1080/0020754031000120078 · Cited by 382 · cited 18×
“This question has long been studied in the mainstream of CLSC (Lambert 2003 ).”
BackgroundInfluentialAn Overview of Techniques for Solving Multiobjective Mathematical Programs
Evans, G. W. (1984) · Management Science · doi:10.1287/mnsc.30.11.1268 · Cited by 378 · cited 2×
“In a nutshell, these methodologies are divided into three types (Evans 1984). The classification regards the timing in which the preference is elicited. The first types of method are those requiring a prior articulation of the preferences. The preferences may be expressed by weights concerning the relative importance…”
MethodDecision-aid and decision-making
Roy, B. (1990) · European Journal of Operational Research · doi:10.1016/0377-2217(90)90196-i · Cited by 340 · cited 2×
“Fulfilling the goals presented in items (ii) and (iii) is less trivial (Roy 1990).”
BackgroundEnvironmental integrated production and recycling management
Spengler, T., Püchert, H., Penkuhn, T., & Rentz, O. (1997) · European Journal of Operational Research · doi:10.1016/s0377-2217(96)00200-7 · Cited by 325 · cited 1×
“remanufacturing systems are reviewed by Thierry et al. (1995) and Gungor and Gupta (1999).”
BackgroundSelf-citationCharacteristics of the research on reverse logistics (1995–2005)
Rubio, S., Mera, A. C., & González, F. J. M. (2006) · International Journal of Production Research · doi:10.1080/00207540600943977 · Cited by 304
Supply Loops and Their Constraints: The Industrial Ecology of Recycling and Reuse
Geyer, R., & Jackson, T. (2004) · California Management Review · doi:10.2307/41166210 · Cited by 281 · cited 2×
“Taking care of end-of-use items instead of disposing of them is assumed to be a proven measure to improve the sustainability of supply chains (Geyer and Jackson 2004).”
BackgroundBusiness Aspects of Closed-Loop Supply Chains
Guide, D., & Daniel, D. (2003) · Lancaster EPrints (Lancaster University) · Cited by 257
Strategic Management of Product Recovery
Toffel, M. W. (2004) · California Management Review · doi:10.2307/41166214 · Cited by 248 · cited 1×
“After transportation and food consumption, the EEE category appears as the third biggest source of environmental footprint (Tukker et al. [2005]).”
BackgroundEarth in the Balance: Ecology and the Human Spirit
Lang, V. (1992) · Eos · doi:10.1029/91eo00395 · Cited by 224
Interactive multiple objective optimization: Survey I—continuous case
Shin, W. S., & Ravindran, A. (1991) · Computers & Operations Research · doi:10.1016/0305-0548(91)90046-t · Cited by 208 · cited 2×
“The steps are (i) find a (preferably) feasible solution, and (ii) interact with the DM and obtain a reaction from this solution (Shin and Ravindran 1991 ).”
BackgroundManaging Closed-Loop Supply Chains
(2005) · Springer eBooks · doi:10.1007/b138818 · Cited by 199 · cited 1×
“We refer to closed-loop supply chains as those supply chains where care is taken of items once they are no longer desired or can no longer be used (Flapper et al. 2005).”
BackgroundLinear programming in disassembly/clustering sequence generation
Lambert, A. J. D. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00162-x · Cited by 196
Computers and the Environment: Understanding and Managing their Impacts
(2003) · Eco-Efficiency in Industry and Science · doi:10.1007/978-94-010-0033-8 · Cited by 187 · cited 1×
“We base our analysis on the results obtained by Williams (2005), which are aligned with the results of Gotthardt et al. (2005).”
Result(2004) · Springer eBooks · doi:10.1007/978-3-540-24803-3 · Cited by 176
Approximation algorithms for combinatorial multicriteria optimization problems
Ehrgott, M. (2000) · International Transactions in Operational Research · doi:10.1111/j.1475-3995.2000.tb00182.x · Cited by 150 · cited 2×
“[1995], Fleischmann et al. [2000]) or indirect, i.e. promoting a green image, meeting customers demand or preparing for further legislation (Fleischmann et al. [2000], Fleischmann et al. [2001], de Brito [2004], Toffel [2004]).”
BackgroundManaging reverse logistics or reversing logistics management
Brito, M. D. (2004) · Cited by 148
Life Cycle Assessment of a Personal Computer and its Effective Recycling Rate (7 pp)
Choi, B., Shin, H., Lee, S., & Hur, T. (2004) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.12.196 · Cited by 137 · cited 1×
“Variants of the classic model that incorporate remanufacturing decisions have been proposed by Golany and Yang (1998), Beltran and Krass (2002), Teunter et al. (2006) and Choi et al. (2006).”
BackgroundImpact of WEEE‐directive on reverse logistics in Germany
Walther, G., & Spengler, T. (2005) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030510607337 · Cited by 135 · cited 4×
“For desktop computers, Williams and Sasaki (2005) calculate that transportation can, in extreme cases, consume up to 8% of the energy needed over the entire life-cycle of the product. The CED distribution for the production, including assembly, transportation, and usage phase, in a no-loop supply chain is presented in…”
BackgroundInfluentialSelf-citationMayers, K., France, C., & Cowell, S. J. (2005) · Journal of Industrial Ecology · doi:10.1162/1088198054821672 · Cited by 112 · cited 3×
“( 2005 ) calculate the environmental impact of a product using a list of various environmental impact indicators, such as human toxicity, ecotoxicity, photochemical oxidation, acidification, ozone layer depletion, etc.”
BackgroundMulticriteria decision-aid approach for product end-of-life alternative selection
Bufardi, A., Gheorghe, R., Kiritsis, D., & Xirouchakis, P. C. (2004) · International Journal of Production Research · doi:10.1080/00207540410001699192 · Cited by 87 · cited 1×
“( 2004 ) study the selection of alternatives for treating a product at its end-of-life based on economical, environmental and social criteria.”
BackgroundLife‐Cycle Assessment and the Use of Broad Indicators
de Haes, H. A. U. (2006) · Journal of Industrial Ecology · doi:10.1162/jiec.2006.10.3.5 · Cited by 40 · cited 3×
“Recent studies show a high correlation between this indicator and the widely accepted Eco-indicator 99 (Helias and Haes 2006).”
BackgroundInfluentialConsiderations and a report on the state of practice
Weitz, K. A., Todd, J. A., Curran, M. A., & Malkin, M. (1996) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978650 · Cited by 39 · cited 1×
“Since this can be a very time-demanding and costly task, especially for complex products, generalised data for certain product types available in data bases (Buwal 1998) or streamlined/simplified LCA approaches (e.g. Weitz et al. 1996) can be used.”
BackgroundEnvironmental Impacts in the Production of Personal Computers
Williams, E. (2003) · Eco-efficiency in industry and science · doi:10.1007/978-94-010-0033-8_3 · Cited by 37 · cited 4×
“Data from production and usage obtained in Williams [2005]. Transportation’s environmental impact is estimated using BUWAL-250 data for transportation consumption.”
BackgroundMethodInfluentialExtended Producer Responsibility in the EU: A Visible March of Folly
Clift, R., & France, C. (2006) · Journal of Industrial Ecology · doi:10.1162/jiec.2006.10.4.5 · Cited by 19
Strategizing the End-of-Life Handling of Personal Computers: Resell, Upgrade, Recycle
Williams, E., & Sasaki, Y. (2003) · Eco-efficiency in industry and science · doi:10.1007/978-94-010-0033-8_9 · Cited by 16 · cited 2×
“For desktop computers, Williams and Sasaki (2005) calculate that transportation can, in extreme cases, consume up to 8% of the energy needed over the entire life-cycle of the product.”
BackgroundVerification of the cumulative energy demand (CED) as a simplified indicator for LCA.
Walk, W., Buchgeister, J., & Schebek, L. (2005) · TUbilio (Technical University of Darmstadt) · Cited by 8
Cited by
Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future
Govindan, K., Soleimani, H., & Kannan, D. (2015) · European Journal of Operational Research · doi:10.1016/j.ejor.2014.07.012 · Cited by 1,963
The Relevance of Circular Economy Practices to the Sustainable Development Goals
Schroeder, P., Anggraeni, K., & Weber, U. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12732 · Cited by 1,758
A review and typology of circular economy business model patterns
Lüdeke‐Freund, F., Gold, S., & Bocken, N. M. P. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12763 · Cited by 1,256
A literature review and a case study of sustainable supply chains with a focus on metrics
Hassini, E., Surti, C., & Searcy, C. (2012) · International Journal of Production Economics · doi:10.1016/j.ijpe.2012.01.042 · Cited by 1,068
Dekker, R., Bloemhof, J., & Mallidis, I. (2012) · European Journal of Operational Research · doi:10.1016/j.ejor.2011.11.010 · Cited by 950
Self-citation
Metadata
- Authors
- Quariguasi Frota Neto, J., Walther, G., Bloemhof, J., van Nunen, J. A. E. E., & Spengler, T.
- Venue
- International Journal of Production Research
- Publisher
- Informa UK Limited
- Published
- 2009-07-02
- Volume
- 48
- Issue
- 15
- Pages
- 4463-4481
- ISSN
- 0020-7543 (ISSN-L)
- 1366-588X
- OpenAlex
- W2131152206
- Cited by
- 217
- References
- 50
- FWCI
- 31.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.