The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Atomistic modelling of plastic deformation of glassy polymers
Abstract
A detailed atomistic approach has been used to investigate the kinematics of plastic deformation in glassy atactic polypropylene to 20% strain. The microstructural stress-strain behaviour was found to consist of smooth reversible portions bounded by irreversible sharp stress drops indicating plastic rearrangement of the structure. Averaging the stress-strain behaviour over an ensemble of 1-815 nm microstructures showed a yield point in the neighbourhood of 5-7% strain. The transformation shear strain for plasticistructural rearrangements was found to be broadly distributed, averaging 1-5% shear strain with a standard deviation of 2-6% shear strain. Combining this result with the activation volume measurements of common glassy polymers showed the size of the plastically transforming region to have a diameter of about 10 nm, thus involving several thousand segments. The transformation shear strain was independent of the system size. Scrutiny of the molecular segment motions associated with plastic rearrangements showed no recurring simple kinematical configurations and no correlation of the local atomic strain to topological features of the chain.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Dynamical Theory of Crystal Lattices
Born, M., Huang, K., & Lax, M. (1955) · American Journal of Physics · doi:10.1119/1.1934059 · Cited by 10,501
Statistical mechanics of chain molecules
Flory, P. J., & Volkenstein, M. (1969) · Biopolymers · doi:10.1002/bip.1969.360080514 · Cited by 6,427
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218
A microscopic mechanism for steady state inhomogeneous flow in metallic glasses
Spaepen, F. (1977) · Acta Metallurgica · doi:10.1016/0001-6160(77)90232-2 · Cited by 2,933
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
Self-citationThe use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Shape of unperturbed linear polymers: polypropylene
Theodorou, D. N., & Suter, U. W. (1985) · Macromolecules · doi:10.1021/ma00148a028 · Cited by 494
Self-citationPlastic flow in a disordered bubble raft (an analog of a metallic glass)
Argon, A. S., & Kuo, H. Y. (1979) · Materials Science and Engineering · doi:10.1016/0025-5416(79)90174-5 · Cited by 374
Self-citationTheory for the Plasticity of Glassy Polymers
Robertson, R. E. (1966) · The Journal of Chemical Physics · doi:10.1063/1.1726558 · Cited by 365
The strength and stiffness of polymers
Frank, F. C. (1970) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1970.0170 · Cited by 319
Research works printed but not linked: 8
- Adams W. W., 1991, Conference Preprint for the Eighth International Conference on Deformation Yield and Fracture of Polymers
- Gilman, J. J. 1968.Dislocations Dynamics, Edited by: Rosenfield, A. R., Hahn, G. T., Bennett, A. L. and Jaffee, R. I. 3New York: McGraw-Hill.
- Hillstrom K., 1976, Nonlinear Optimization Routines in AMDLIB
- Hutnik M., 1993, Macromolecules
- Jeffreys H., 1963, Cartesian Tensors
- Khalatur P. G., 1983, Vysokomelek. Soyed. A., 25, 1517
- Lee, W. A., Rutherford, R. A. and Immergut, E. H. 1975.Polymer Handbook, second edition, III–137. New York: Wiley-Interscience.
- Yannas, I. V. 1975.Proceedings of the International Symposium on Macromolecules, Rio de Janeiro, 1975, Edited by: Mano, E. B. 265Amsterdam: Elsevier.
Cited by
Molecular dynamics simulations of deformation mechanisms of amorphous polyethylene
Hossain, D., Tschopp, M. A., Ward, D. K., Bouvard, J. L., Wang, P., & Horstemeyer, M. F. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.009 · Cited by 462
Argon, A. S., & Cohen, R. E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00546-9 · Cited by 304
Self-citationPhysical analysis of the state- and rate-dependent friction law. II. Dynamic friction
Baumberger, T., Berthoud, P., & Caroli, C. (1999) · Physical Review B · doi:10.1103/physrevb.60.3928 · Cited by 266
Mechanical Heterogeneities in Model Polymer Glasses at Small Length Scales
Yoshimoto, K., Jain, T. S., Workum, K. V., Nealey, P. F., & de Pablo, J. J. (2004) · Physical Review Letters · doi:10.1103/physrevlett.93.175501 · Cited by 245
Malandro, D. L., & Lacks, D. J. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478340 · Cited by 208
Metadata
- Authors
- Mott, P. H., Argon, A. S., & Suter, U. W.
- Affiliations
- National Institute of Standards and Technology (US)
- Massachusetts Institute of Technology (US)
- ETH Zurich (CH)
- ORCID
- Suter, U. W.
- Venue
- Philosophical Magazine A
- Publisher
- Informa UK Limited
- Published
- 1993-04
- Volume
- 67
- Issue
- 4
- Pages
- 931-978
- ISSN
- 0141-8610 (ISSN-L)
- 1460-6992
- OpenAlex
- W2063388793
- Cited by
- 130
- References
- 25
- Citations by year
- 2025: 2 · 2022: 2 · 2021: 4 · 2020: 4 · 2019: 3 · 2018: 6 · 2017: 4 · 2016: 6 · 2015: 3 · 2014: 4 · 2013: 6
- FWCI
- 4.63
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Keywords
- plastic deformation, glassy polymers, atactic polypropylene, atomistic modeling, stress drop, yield point, activation volume, plastic rearrangements, stress-strain behavior
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Atomistic modelling of plastic deformation of glassy polymers. https://app.cochat.ai/papers/10.1080/01418619308213969
- The paper
- Mott, P. H., Argon, A. S., & Suter, U. W. (1993). Atomistic modelling of plastic deformation of glassy polymers. Philosophical Magazine A. https://doi.org/10.1080/01418619308213969
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.