Thermal Performance Enhancement of Triplex Tube Latent Thermal Storage Using Fins-Nano-Phase Change Material Technique
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Latent heat thermal energy storage (LHTES) systems using a phase change material (PCM) can reduce the heat-transfer rates during charging/discharging processes because of their inherently low thermal conductivity. In this study, heat-transfer enhancement using various configurations of longitudinal fins employing both a PCM and a nano-PCM in a large triplex-tube heat exchanger (TTHX) was numerically investigated via the Fluent 15 software. The results showed that the thermal conductivity of the pure PCM (0.2 W/m K) can be observably enhanced by dispersing 10% alumina (Al2O3) to 25%. Therefore, the melting time is reduced to 12%, 11%, and 17% for the internal, internal-external, and external fins, respectively, compared with the case of the PCM without nanoparticle. It is concluded that the model of external fins-nano-PCM embedded in a large TTHX is the most efficient model for achieving complete PCM melting in a short time (188 min), where improving the thermal performance to 14% and 11% compared with the TTHX with internal and internal-external fins-nano-PCM, respectively. The simulation results are validated and agree well with experimental results for the PCM and nano-PCM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For validation of the two-phase modeling of the NePCM, the experimental study42 of latent heat thermal storage system using a triplex tube heat exchanger (TTHE) is adopted.”
From A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications (2023) · cites this paper as [42]
Citations
Cites
Numerical Heat Transfer and Fluid Flow
Patankar, S. V. (2018) · CRC Press eBooks · doi:10.1201/9781482234213 · Cited by 23,360
Brent, A. D., Voller, V. R., & Reid, K. J. (1988) · Numerical Heat Transfer · doi:10.1080/10407788808913615 · Cited by 1,699
Balaji, C., Srinivasan, B., & Gedupudi, S. (2021) · Heat Transfer Engineering · doi:10.1016/b978-0-12-818503-2.00009-5 · Cited by 722
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Self-citationVajjha, R. S., Das, D. K., & Namburu, P. K. (2010) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2010.02.016 · Cited by 432
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Ho, C. J., & Gao, J. Y. (2009) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2009.01.015 · Cited by 393
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Numerical study on melting of paraffin wax with Al2O3 in a square enclosure
Arasu, A. V., & Mujumdar, A. S. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2011.09.013 · Cited by 330
Research works printed but not linked: 3
- Niyas H., International Journal of Scientific and Engineering Research, 4, 2229
- Zeng J. L., Journal of Thermal Analysis and Calorimetry, 87, 369
- Pincemin S., ASME Journal of Solar Energy Engineering, 130, 1
Cited by
Sheikholeslami, M. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111856 · Cited by 224
Ebadi, S., Tasnim, S. H., Aliabadi, A. A., & Mahmud, S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.016 · Cited by 200
A review of nanomaterial incorporated phase change materials for solar thermal energy storage
Nazari, M. A., Maleki, A., Assad, M. E. H., Rosen, M. A., Haghighi, A., Sharabaty, H., & Chen, L. (2021) · Solar Energy · doi:10.1016/j.solener.2021.08.051 · Cited by 143
Hasnain, F. U., Irfan, M., Khan, M. M., Khan, L. A., & Ahmed, H. F. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102513 · Cited by 136
Mousavi, S., Siavashi, M., & Heyhat, M. M. (2019) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2019.1606634 · Cited by 120
Metadata
- Authors
- Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A.
- Affiliations
- University of Diyala (IQ)
- National University of Malaysia (MY)
- Sana'a Community College (YE)
- Corresponding author
- Abdulateef, Ammar M.
- Venue
- Heat Transfer Engineering
- Publisher
- Informa UK Limited
- Published
- 2017-09-13
- Volume
- 39
- Issue
- 12
- Pages
- 1067-1080
- ISSN
- 0145-7632 (ISSN-L)
- 1521-0537
- OpenAlex
- W2737072617
- Cited by
- 57
- References
- 23
- Citations by year
- 2026: 3 · 2025: 7 · 2024: 7 · 2023: 7 · 2022: 8 · 2021: 10 · 2020: 6 · 2019: 5 · 2018: 4
- FWCI
- 3.19
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Heat Transfer Engineering (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- latent heat storage, phase change materials, nanofluids, Al2O3 nanoparticles, triplex tube heat exchanger, longitudinal fins, heat transfer enhancement, thermal conductivity, PCM melting, nanoparticle concentration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Performance Enhancement of Triplex Tube Latent Thermal Storage Using Fins-Nano-Phase Change Material Technique. https://app.cochat.ai/papers/10.1080/01457632.2017.1358488
- The paper
- Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018). Thermal Performance Enhancement of Triplex Tube Latent Thermal Storage Using Fins-Nano-Phase Change Material Technique. Heat Transfer Engineering. https://doi.org/10.1080/01457632.2017.1358488
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.