Equilibrium Analysis of Cyclic Adsorption Processes: CO 2 Working Capacities with NaY
The DOI matches its Crossref record.
Abstract
The most common application of adsorption is via pressure swing adsorption. In this type of design, the feed and regeneration temperatures are kept approximately equal, whereas the feed pressure is higher than the regeneration pressure. By exploiting the difference in the amount adsorbed at a higher pressure to the amount adsorbed at a lower pressure, a working capacity is realized. Therefore, by examining the expected (ideal) working capacity of an adsorbent, a performance characteristic can be analyzed for a pressure swing adsorption process (PSA). For this work, feed pressures up to 2.0 atm CO2 and feed temperatures from 20°C to 200°C were investigated. These limits were chosen due to the nature of the target process: CO2 removal from flue gas. Carbon dioxide adsorption isotherms were determined in a constant volume system at 23°C, 45°C, 65°C, 104°C, 146°C, and 198°C, for pressures between 0.001 and 2.5 atm CO2 with NaY zeolite. These data were fit with the temperature dependent form of the Toth isotherm. Henry's Law constants and the heat of adsorption at the limit of zero coverage were also determined using the concentration pulse method. Comparison of the Henry's Law constants derived from the Toth isotherm, and those obtained with the concentration pulse method provided excellent agreement. By using the Toth isotherm, expected working capacity contour plots were constructed for PSA (Pressure Swing Adsorption), TSA (Temperature Swing Adsorption), and PTSA (Pressure Temperature Swing Adsorption) cycles. The largest expected working capacities were obtained when the bed was operated under a high‐pressure gradient PSA cycle, or a high thermal and pressure gradient PTSA cycle. The results also showed that certain TSA and PSA cycle conditions would result with higher expected working capacities as the feed temperature increases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Self-citationSorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Adsorption of CO2on Zeolite 13X and Activated Carbon with Higher Surface Area
Zhang, Z., Zhang, W., Chen, X., Xia, Q., & Li, Z. (2010) · Separation Science and Technology · doi:10.1080/01496390903571192 · Cited by 146
Cycle Development and Design for CO 2 Capture from Flue Gas by Vacuum Swing Adsorption
Zhang, J., & Webley, P. A. (2008) · Environmental Science & Technology · doi:10.1021/es0706854 · Cited by 132
Metadata
- Authors
- Harlick, P., & Tezel, F.
- Venue
- Separation Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2005-10-01
- Volume
- 40
- Issue
- 13
- Pages
- 2569-2591
- ISSN
- 0149-6395 (ISSN-L)
- 1520-5754
- OpenAlex
- W1971586425
- Cited by
- 24
- References
- 0
- FWCI
- 1.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Equilibrium Analysis of Cyclic Adsorption Processes: CO 2 Working Capacities with NaY. https://app.cochat.ai/papers/10.1080/01496390500283233
- The paper
- Harlick, P., & Tezel, F. (2005). Equilibrium Analysis of Cyclic Adsorption Processes: CO 2 Working Capacities with NaY. Separation Science and Technology. https://doi.org/10.1080/01496390500283233
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.