Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 294

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Magnetic nanoparticles for interstitial thermotherapy – feasibility, tolerance and achieved temperatures

Open access
Wust, >Peter, Gneveckow, Uwe, Wust, >Peter, Gneveckow, Uwe, Johannsen, Manfred, Böhmer, Dirk, Henkel, Thomas, Kahmann, Frank, Sehouli, Jalid, Felix, Roland, Ricke, Jens, Jordan, Andreas·2006·International Journal of Hyperthermia

Abstract

BACKGROUND: The concept of magnetic fluid hyperthermia is clinically evaluated after development of the whole body magnetic field applicator MFH 300F and the magnetofluid MFL 082AS. This new system for localized thermotherapy is suitable either for hyperthermia or thermoablation. The magnetic fluid, composed of iron oxide nanoparticles dispersed in water, must be distributed in the tumour and is subsequently heated by exposing to an alternating magnetic field in the applicator. We performed a feasibility study with 22 patients suffering from heavily pretreated recurrences of different tumour entities, where hyperthermia in conjunction with irradiation and/or chemotherapy was an option. The potential to estimate (by post-implantation analyses) and to achieve (by improving the technique) a satisfactory temperature distribution was evaluated in dependency on the implantation technique. MATERIAL AND METHODS: Three implantation methods were established: Infiltration under CT fluoroscopy (group A), TRUS (transrectal ultrasound)--guided implantation with X-fluoroscopy (group B) and intra-operative infiltration under visual control (group C). In group A and B the distribution of the nanoparticles can be planned prior to implantation on the basis of three-dimensional image datasets. The specific absorption rates (SAR in W/kg) can be derived from the particle distribution imaged via CT together with the actual H-field strength (in kA/m). The temperature distribution in the tumour region is calculated using the bioheat-transfer equation assessing a mean perfusion value, which is determined by matching calculated temperatures to direct (invasive or endoluminal) temperature measurements in reference points in or near the target region. RESULTS: Instillation of the magnetic fluid and the thermotherapy treatments were tolerated without or with only moderate side effects, respectively. Using tolerable H-field-strengths of 3.0-6.0 kA/m in the pelvis, up to 7.5 kA/m in the thoracic and neck region and >10.0 kA/m for the head, we achieved SAR of 60-380 W/kg in the target leading to a 40 degrees C heat-coverage of 86%. However, the coverage with > or =42 degrees C is unsatisfactory at present (30% of the target volume in group A and only 0.2% in group B). CONCLUSION: Further improvement of the temperature distribution is required by refining the implantation techniques or simply by increasing the amount of nanofluid or elevation of the magnetic field strength. From the actual nanoparticle distribution and derived temperatures we can extrapolate, that already a moderate increase of the H-field by only 2 kA/m would significantly improve the 42 degrees C coverage towards 100% (98%). This illustrates the great potential of the nanofluid-based heating technology.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1080/02656730601106037

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

See all 294

Metadata

Authors
Wust, >., Gneveckow, U., Wust, >., Gneveckow, U., Johannsen, M., Böhmer, D., Henkel, T., Kahmann, F., Sehouli, J., Felix, R., Ricke, J., & Jordan, A.
Venue
International Journal of Hyperthermia
Published
2006-01
Volume
22
Issue
8
Pages
673-685
ISSN
  • 0265-6736 (ISSN-L)
  • 1464-5157
OpenAlex
W2052258061
Cited by
294
References
1
FWCI
10.24
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Magnetic nanoparticles for interstitial thermotherapy – feasibility, tolerance and achieved temperatures. https://app.cochat.ai/papers/10.1080/02656730601106037
The paper
Wust, >., Gneveckow, U., Wust, >., Gneveckow, U., Johannsen, M., Böhmer, D., Henkel, T., Kahmann, F., Sehouli, J., Felix, R., Ricke, J., & Jordan, A. (2006). Magnetic nanoparticles for interstitial thermotherapy – feasibility, tolerance and achieved temperatures. International Journal of Hyperthermia. https://doi.org/10.1080/02656730601106037

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.