Morphological and Mechanical Properties Dependence of PLA Amount in PET Matrix Processed by Single-Screw Extrusion
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this study, the dependence on the morphology and mechanical properties was analyzed when different amounts of polylactic acid are added to the polyethylene terephthalate polymer matrix using single-screw extrusion. Thermograms of the polymer blends obtained by differential scanning calorimetry couple to thermal gravimetric analysis show a displacement in the glass transition temperature with the amount of polylactic acid (1, 2.5, 5, and 7.5 wt%) added to the polymer matrix. Scanning electron microscopy and atomic force microscopy images showed two different kinds of morphology, both characteristics of miscible and partially miscible polymer blends. Fourier transform infrared spectroscopy measurements confirmed a physical interaction by hydrogen bond in the polymer blends. The impact resistance and tensile strength are reduced with the polylactic acid addition and are influenced by the fraction of segments of hydrogen bonded in the polyethylene terephthalate/polylactic acid blends as well as their miscibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Compatibilizers for melt blending: premade block copolymers
Macosko, C. W., Guégan, P., Khandpur, A. K., Nakayama, A., Marechal, P., & Inoue, T. (1996) · Macromolecules · doi:10.1021/ma9602482 · Cited by 458
La Mantia, F. P., Botta, L., Morreale, M., & Scaffaro, R. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.017 · Cited by 118 · cited 5×
“These results are according to the SEM analysis and it supports the assumption that the PLA is uniformly dispersed into the PET matrix([3]).”
BackgroundResultInfluential
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Yuan, X., Lee, J. G., Yun, H., Deng, S., Kim, Y. J., Lee, J. E., Kwak, S. K., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125350 · Cited by 194
Upcycling of waste polyethylene terephthalate plastic bottles into porous carbon for CF4 adsorption
Yuan, X., Cho, M.-K., Lee, J. G., Choi, S. W., & Lee, K. B. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114868 · Cited by 101
Metadata
- Authors
- Torres-Huerta, A. M., Del Angel-López, D., Domínguez-Crespo, M. A., Palma-Ramírez, D., Perales-Castro, M. E., & Flores-Vela, A.
- Venue
- Polymer-Plastics Technology and Engineering
- Publisher
- Informa UK Limited
- Published
- 2016-01-30
- Volume
- 55
- Issue
- 7
- Pages
- 672-683
- ISSN
- 0360-2559 (ISSN-L)
- 1525-6111
- OpenAlex
- W2346921999
- Cited by
- 70
- References
- 4
- FWCI
- 1.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Morphological and Mechanical Properties Dependence of PLA Amount in PET Matrix Processed by Single-Screw Extrusion. https://app.cochat.ai/papers/10.1080/03602559.2015.1132433
- The paper
- Torres-Huerta, A. M., Del Angel-López, D., Domínguez-Crespo, M. A., Palma-Ramírez, D., Perales-Castro, M. E., & Flores-Vela, A. (2016). Morphological and Mechanical Properties Dependence of PLA Amount in PET Matrix Processed by Single-Screw Extrusion. Polymer-Plastics Technology and Engineering. https://doi.org/10.1080/03602559.2015.1132433
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.