The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
An open source approach to the design and implementation of Digital Twins for Smart Manufacturing
Abstract
This paper discusses the design of a Digital Twin (DT) demonstrator for Smart Manufacturing, following an open source approach for implementation. Open source technology can comprise of software, hardware and hybrid solutions that nowadays drive Smart Manufacturing. The major potential of open source technology in Smart Manufacturing lies in enabling interoperability and in reducing the capital costs of designing and implementing new manufacturing solutions. After presenting our motivation to adopt an open source approach for the design of a DT demonstrator, we identify the major implementation requirements of Smart Cyber Physical Systems (CPSs) and DTs. A conceptualisation of the core components of a DT demonstrator is provided and three technology building blocks for the realisation of a DT have been identified. These technology building blocks include components for the management of data, models and services. From the conceptual model of the DT demonstrator, we derived a high-level micro-services architecture and provided a case study infrastructure for the implementation of the DT demonstrator based on available open source technologies. The paper closes with research questions to be addressed in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871
Beyond the hype: Big data concepts, methods, and analytics
Gandomi, A., & Haider, M. (2015) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2014.10.007 · Cited by 4,226
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Challenges of Big Data analysis
Fan, J., Han, F., & Liu, H. (2014) · National Science Review · doi:10.1093/nsr/nwt032 · Cited by 1,482
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474
Digital Twin—The Simulation Aspect
Boschert, S., & Rosen, R. (2016) · Mechatronic Futures · doi:10.1007/978-3-319-32156-1_5 · Cited by 1,158 · cited 2×
“The core functionality of a DT is to support design tasks and to validate system properties through multi-domain and multi-level simulations along lifecycle phases, including operational support (Boschert and Rosen 2016).”
BackgroundMethodA Simulation-Based Architecture for Smart Cyber-Physical Systems
Gabor, T., Belzner, L., Kiermeier, M., Beck, M. T., & Neitz, A. (2016) · 2016 IEEE International Conference on Autonomic Computing (ICAC) · doi:10.1109/icac.2016.29 · Cited by 298
Kraft, E. M. (2016) · 54th AIAA Aerospace Sciences Meeting · doi:10.2514/6.2016-0897 · Cited by 156
Requirements and languages for the semantic representation of manufacturing systems
Negri, E., Fumagalli, L., Garetti, M., & Tanca, L. (2016) · Computers in Industry · doi:10.1016/j.compind.2015.10.009 · Cited by 93
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Lim, K. Y. H., Zheng, P., & Chen, C.-H. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01512-w · Cited by 700
Kamble, S. S., Gunasekaran, A., Parekh, H., Mani, V., Belhadi, A., & Sharma, R. (2022) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.121448 · Cited by 381
Liu, X., Jiang, D., Tao, B., Xiang, F., Jiang, G., Sun, Y., Kong, J., & Li, G. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101876 · Cited by 351
Kondaveeti, H. K., Kumaravelu, N. K., Vanambathina, S. D., Mathe, S. E., & Vappangi, S. (2021) · Computer Science Review · doi:10.1016/j.cosrev.2021.100364 · Cited by 328
Metadata
- Authors
- Damjanovic-Behrendt, V., & Behrendt, W.
- Venue
- International Journal of Computer Integrated Manufacturing
- Publisher
- Informa UK Limited
- Published
- 2019-04-13
- Volume
- 32
- Issue
- 4-5
- Pages
- 366-384
- ISSN
- 0951-192X (ISSN-L)
- 1362-3052
- OpenAlex
- W2936666060
- Cited by
- 163
- References
- 12
- FWCI
- 13.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An open source approach to the design and implementation of Digital Twins for Smart Manufacturing. https://app.cochat.ai/papers/10.1080/0951192x.2019.1599436
- The paper
- Damjanovic-Behrendt, V., & Behrendt, W. (2019). An open source approach to the design and implementation of Digital Twins for Smart Manufacturing. International Journal of Computer Integrated Manufacturing. https://doi.org/10.1080/0951192x.2019.1599436
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.