The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The use of Digital Twin for predictive maintenance in manufacturing
Open accessAbstract
This paper presents a methodology to calculate the Remaining Useful Life (RUL) of machinery equipment by utilising physics-based simulation models and Digital Twin concept, in order to enable predictive maintenance for manufacturing resources using Prognostics and health management (PHM) techniques. The resources and the properties of them are first modelled in a digital environment able to simulate the real machine’s behaviour. Data are gathered by machines’ controllers and external sensors to be used for the synchronous tuning of the digital models and their simulation. The outcome of the simulation is then used to assess the resource’s condition and to calculate RUL. In this way, the condition and the status of the machines can be monitored and predicted as a result from the simulation of physics-based models, without invasive techniques of common predictive maintenance solutions. A case study is presented in this paper where the proposed methodology is validated by predicting the RUL of an industrial robot.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Remaining useful life estimation in prognostics using deep convolution neural networks
Li, X., Ding, Q., & Sun, J.-Q. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.11.021 · Cited by 1,755
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Physical system modeling with Modelica
Mattsson, S. E., Elmqvist, H., & Otter, M. (1998) · Control Engineering Practice · doi:10.1016/s0967-0661(98)00047-1 · Cited by 420
Digital manufacturing: History, perspectives, and outlook
Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., & Georgoulias, K. (2009) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem1241 · Cited by 328
Self-citationAivaliotis, P., Georgoulias, K., Arkouli, Z., & Makris, S. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.072 · Cited by 242
Self-citationA state-of-the-art review of FMEA/FMECA including patents
Spreafico, C., Russo, D., & Rizzi, C. (2017) · Computer Science Review · doi:10.1016/j.cosrev.2017.05.002 · Cited by 181
2006 IEEE International Conference on Fuzzy Systems
(2006) · doi:10.1109/fuzz11287.2006 · Cited by 145
Shi, H., & Zeng, J. (2015) · Computers & Industrial Engineering · doi:10.1016/j.cie.2015.12.016 · Cited by 124
On a Predictive Maintenance Platform for Production Systems
Efthymiou, K., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2012) · Procedia CIRP · doi:10.1016/j.procir.2012.07.039 · Cited by 112
Self-citation2011 IEEE Conference on Prognostics and Health Management
(2011) · doi:10.1109/phm17795.2011 · Cited by 33
Cited by
Digital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 741
Predictive maintenance using digital twins: A systematic literature review
van Dinter, R., Tekinerdogan, B., & Catal, C. (2022) · Information and Software Technology · doi:10.1016/j.infsof.2022.107008 · Cited by 540
A survey on AI-driven digital twins in Industry 4.0: smart manufacturing and advanced robotics
Huang, Z., Shen, Y., Li, J., Fey, M., & Brecher, C. (2021) · Sensors · doi:10.3390/s21196340 · Cited by 418
Kamble, S. S., Gunasekaran, A., Parekh, H., Mani, V., Belhadi, A., & Sharma, R. (2022) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.121448 · Cited by 381
Liu, X., Jiang, D., Tao, B., Xiang, F., Jiang, G., Sun, Y., Kong, J., & Li, G. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101876 · Cited by 351
Metadata
- Authors
- Aivaliotis, P., Georgoulias, K., & Chryssolouris, G.
- Venue
- International Journal of Computer Integrated Manufacturing
- Publisher
- Informa UK Limited
- Published
- 2019-11-02
- Volume
- 32
- Issue
- 11
- Pages
- 1067-1080
- ISSN
- 0951-192X (ISSN-L)
- 1362-3052
- OpenAlex
- W2986110703
- Cited by
- 437
- References
- 13
- FWCI
- 34.79
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The use of Digital Twin for predictive maintenance in manufacturing. https://app.cochat.ai/papers/10.1080/0951192x.2019.1686173
- The paper
- Aivaliotis, P., Georgoulias, K., & Chryssolouris, G. (2019). The use of Digital Twin for predictive maintenance in manufacturing. International Journal of Computer Integrated Manufacturing. https://doi.org/10.1080/0951192x.2019.1686173
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.