The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A state-of-the-art review of FMEA/FMECA including patents
Open accessAbstract
This paper presents a critical review of Failure Modes and Effect Analysis (FMEA). Although the method is almost 70 years old, in literature there are still many researchers, both from academy and industry, devoted to improve it and overcoming unsolved and still open problems. The aim of this work consists in analysing a representative pool of scientific papers (220) and patents (109), in order to have an overview of the evolution of the method and try to understand if the efforts spent to improve it effectively answer to the several criticisms found in literature. All documents have been classified according to authors, source, and four technical classes dealing with the applicability of the method, representation of the cause and effect chain, risk analysis and integration with the problem-solving phase. A detailed analysis of the results allowed us to identify the most current problems, the improvement paths, and which other methods and tool are proposed to be integrated with FMEA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis
Bowles, J. B., & Peláez, C. E. (1995) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00068-d · Cited by 687
MULTIPLE FAILURE MODES ANALYSIS AND WEIGHTED RISK PRIORITY NUMBER EVALUATION IN FMEA
Xiao, N., Huang, H.-Z., Li, Y., He, L., & Jin, T. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.02.004 · Cited by 308
Research works printed but not linked: 19
- Steven Kmenta, Kosuke Ishii, Advanced FMEA using meta behavior modeling for concurrent design of products and controls, in: Proceedings of the 1998 ASME Design Engineering Technical Conferences, 1998. · DOI
- Sutrisno, 2011, Service reliability assessment using failure mode and effect analysis (FMEA): survey and opportunity roadmap, Int. J. Eng. Sci. Technol., 3, 25, 10.4314/ijest.v3i7.3S · doi:10.4314/ijest.v3i7.3s
- Tixier, 2002, Review of 62 risk analysis methodologies of industrial plants, Journal of Loss Prevention in the Process Industries, 15, 291, 10.1016/S0950-4230(02)00008-6 · DOI · Paper page
- Liu, 2014, Failure mode and effects analysis using D numbers and grey relational projection method, Expert Syst. Appl., 41, 4670, 10.1016/j.eswa.2014.01.031 · DOI · Paper page
- Liu, 2011, Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory, Expert Syst. Appl., 38, 4403, 10.1016/j.eswa.2010.09.110 · DOI · Paper page
- Price, 2002, Automated multiple failure FMEA, Reliab. Eng. Syst. Safety, 76, 1, 10.1016/S0951-8320(01)00136-3 · DOI
- Xu, 2002, Fuzzy assessment of FMEA for engine systems, Reliab. Eng. Syst. Safety, 75, 17, 10.1016/S0951-8320(01)00101-6 · DOI · Paper page
- Rhee, 2003, Using cost based FMEA to enhance reliability and serviceability, Adv. Eng. Inform., 17, 179, 10.1016/j.aei.2004.07.002 · DOI · Paper page
- García, 2011, Mapping FMEA into Bayesian networks, Int. J. Perform. Eng., 7, 525
- Ebrahimipour, 2010, An ontology approach to support FMEA studies, Expert Syst. Appl., 37, 671, 10.1016/j.eswa.2009.06.033 · DOI
- Steven Kmenta, Kosuke Ishii, Scenario-based FMEA: a life cycle cost perspective, in: Proc. ASME Design Engineering Technical Conf. Baltimore, MD 2000. · DOI
- González Bosch, 2005, TQM and QFD: exploiting a customer complaint management system, Int. J. Quality Reliab. Manag., 22, 30, 10.1108/02656710510572977 · doi:10.1108/02656710510572977
- Bouti, 1994, A state-of-the-art review of FMEA/FMECA, Int. J. Reliab., Quality Safety Eng., 1, 515, 10.1142/S0218539394000362 · DOI
- Liu, 2013, Risk evaluation approaches in failure mode and effects analysis: A literature review, Expert Syst. Appl., 40, 828, 10.1016/j.eswa.2012.08.010 · DOI · Paper page
- Daniel Bell, et al., Using causal reasoning for automated failure modes and effects analysis (FMEA) Reliability and Maintainability Symposium, in: 1992 Proceedings, Annual. IEEE, 1992.
- Augustine, 2012, Cognitive map-based system modeling for identifying interaction failure modes, Res. Eng. Des., 23, 105, 10.1007/s00163-011-0117-6 · DOI
- Manzar Abbas, Vachtsevanos George J., A system-level approach to fault progression analysis in complex engineering systems, in: the Annual Conference of the Prognostics and Health Management Society, 2009.
- Sachdeva, 2009, Multi-factor failure mode critically analysis using TOPSIS, J. Ind. Eng. Int., 5, 1
- Regazzoni, 2011, TRIZ tools to enhance risk management, Procedia Eng., 9, 40, 10.1016/j.proeng.2011.03.099 · doi:10.1016/j.proeng.2011.03.099
Cited by
The use of Digital Twin for predictive maintenance in manufacturing
Aivaliotis, P., Georgoulias, K., & Chryssolouris, G. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1686173 · Cited by 437
Huang, J., You, J.-X., Liu, H.-C., & Song, M.-S. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.106885 · Cited by 277
A Reliability Engineering Approach for Managing Risks in CubeSats
Menchinelli, A., Ingiosi, F., Pamphili, L., Marzioli, P., Patriarca, R., Costantino, F., & Piergentili, F. (2018) · Aerospace · doi:10.3390/aerospace5040121 · Cited by 35
Hybrid Intelligence Failure Analysis for Industry 4.0: A Literature Review and Future Prospective
Mokhtarzadeh, M., Rodríguez-Echeverría, J., Semanjski, I., & Gautama, S. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02376-5 · Cited by 35
Metadata
- Authors
- Spreafico, C., Russo, D., & Rizzi, C.
- Venue
- Computer Science Review
- Publisher
- Elsevier BV
- Published
- 2017-08
- Volume
- 25
- Pages
- 19-28
- ISSN
- 1574-0137 (ISSN-L)
- OpenAlex
- W2728688086
- Cited by
- 181
- References
- 2
- FWCI
- 13.48
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A state-of-the-art review of FMEA/FMECA including patents. https://app.cochat.ai/papers/10.1016/j.cosrev.2017.05.002
- The paper
- Spreafico, C., Russo, D., & Rizzi, C. (2017). A state-of-the-art review of FMEA/FMECA including patents. Computer Science Review. https://doi.org/10.1016/j.cosrev.2017.05.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.