Fault diagnosis of low speed bearing based on acoustic emission signal and multi-class relevance vector machine
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
This study presents an acoustic emission (AE) based fault diagnosis for low speed bearing using multi-class relevance vector machine (RVM). A low speed test rig was developed to simulate the various defects with shaft speeds as low as 10 rpm under several loading conditions. The data was acquired using an AE sensor with the test bearing operating at a constant loading (5 kN) and with a speed range from 20 to 80 rpm. This study is aimed at finding a reliable method/tool for low speed machines fault diagnosis based on AE signal. In the present study, component analysis was performed to extract the bearing feature and to reduce the dimensionality of original data feature. The result shows that multi-class RVM offers a promising approach for fault diagnosis of low speed machines.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Nature of Statistical Learning Theory
Vapnik, V. N. (1995) · doi:10.1007/978-1-4757-2440-0 · Cited by 39,138
The Nature of Statistical Learning Theory
Vapnik, V. N. (2000) · Springer eBooks · doi:10.1007/978-1-4757-3264-1 · Cited by 10,696 · cited 1×
“According to the different classification problems, different kernel function can be selected to obtain the optimal classification results [26].”
BackgroundIndependent component analysis: algorithms and applications
Hyvärinen, A., & Oja, E. (2000) · Neural Networks · doi:10.1016/s0893-6080(00)00026-5 · Cited by 8,705
Goodall, C. (1988) · Technometrics · doi:10.1080/00401706.1988.10488412 · Cited by 8,675
Jolliffe, I. T. (1986) · Springer Series in Statistics · doi:10.1007/978-1-4757-1904-8 · Cited by 8,273
A comparison of methods for multiclass support vector machines
Hsu, C.-W., & Lin, C.-J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991427 · Cited by 6,838 · cited 1×
“SVM based on multi-class classification was applied to perform the classification process using one-against-one strategy [32].”
MethodAdvances in kernel methods: support vector learning
Schölkopf, B., Burges, C. J. C., & Smola, A. J. (1999) · doi:10.5555/299094 · Cited by 5,789
Fast Training of Support Vector Machines Using Sequential Minimal Optimization
Platt, J. C. (1998) · Advances in Kernel Methods · doi:10.7551/mitpress/1130.003.0016 · Cited by 5,437
A Practical Guide to Support Vector Classication
Hsu, C., Chang, C.-C., & Lin, C. (2008) · Cited by 5,083
(2000) · CrossRef Listing of Deleted DOIs · doi:10.1162/15324430152748236 · Cited by 1,819
Research works printed but not linked: 9
- R.H. Bannister, A review of rolling element bearing monitoring techniques, (1985), pp. 11–24, International Mechanical Engineers Conference on Condition Monitoring of Machinery and Plant
- P.D. McFadden, Condition monitoring of rolling element bearings by vibration analysis, (1990), pp. 49–53, Proceedings of the Instn Mech Engrs Seminar on Machine Condition Monitoring
- Yoshioka T., 1984, ASME, Prod. Eng. Div. Publ., 14, 55
- Kakishima H., 2000, Quart. Rev. Railway Techn. Res. Inst., 41, 127
- Tavakoli M.S., 1991, Proceeding of International Conference on Acoustic Emission in Manufacturing
- T.J. Holroyd, Acoustic emission monitoring of slow moving bearings, in Proceeding of COMADEM 1993, University of West of England, Bristol, 1993, p. 518
- J. Miettinen and P. Patanity, Acoustic emission in monitoring extremely slowly rotating rolling bearing, in Proceeding of COMADEM 1999, Sunderland, UK, 1999, pp. 289–297
- N. Jamaludin, M. jailani, and M. Nor, Lubrication monitoring a low speed bearing using acoustic emission technique, in Proceeding of COMADEM, COMADEM International, Birmingham, UK, 2002, pp. 521–527
- Li C.J., 1985, Wear, 185, 67
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Self-citationIslam, M. M. M., & Kim, J.-M. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.008 · Cited by 204
Caesarendra, W., Kosasih, B., Tieu, A. K., Zhu, H., Moodie, C. A. S., & Zhu, Q. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.020 · Cited by 195
Kang, M., Kim, J., Kim, J.-M., Tan, A. C. C., Kim, E. Y., & Choi, B.-K. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2358494 · Cited by 169
“sis, given its ability to capture low-energy signals [1], [18]–[25].”
BackgroundMethodSelf-citationKang, M., Kim, J., Wills, L. M., & Kim, J.-M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2460242 · Cited by 146
“As stated earlier, this paper uses the analysis data set and explores the influence of different numbers of discriminant, independent, or principal components across ten times k-cv to decide the most efficient n components for bearing fault diagnosis via TRLDA, ICA, and PCA, as shown in Fig 13.”
MethodInfluential
Metadata
- Authors
- Widodo, A., Yang, B.-S., Kim, E. Y., Tan, A. C. C., & Mathew, J.
- Affiliations
- Diponegoro University (ID)
- Pukyong National University (KR)
- Queensland University of Technology (AU)
- Corresponding author
- Yang, Bo-Suk
- Venue
- Nondestructive Testing and Evaluation
- Publisher
- Informa UK Limited
- Published
- 2009-12
- Volume
- 24
- Issue
- 4
- Pages
- 313-328
- ISSN
- 1058-9759 (ISSN-L)
- 1477-2671
- OpenAlex
- W2048723895
- Semantic Scholar
- 2e2789233058a8c3647ea40a5e4194dbe712edbe
- Cited by
- 58
- References
- 36
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 4 · 2023: 4 · 2022: 3 · 2020: 7 · 2019: 7 · 2018: 3 · 2017: 2 · 2016: 6 · 2015: 7 · 2014: 7 · 2013: 2 · 2012: 1
- FWCI
- 0.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Nondestructive Testing And Evaluation (publishedVersion)
- QUT ePrints (Queensland University of Technology) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- low-speed bearings, bearing fault diagnosis, acoustic emission, relevance vector machine, multi-class classification, low-speed machines, feature extraction, dimensionality reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault diagnosis of low speed bearing based on acoustic emission signal and multi-class relevance vector machine. https://app.cochat.ai/papers/10.1080/10589750802378974
- The paper
- Widodo, A., Yang, B.-S., Kim, E. Y., Tan, A. C. C., & Mathew, J. (2009). Fault diagnosis of low speed bearing based on acoustic emission signal and multi-class relevance vector machine. Nondestructive Testing and Evaluation. https://doi.org/10.1080/10589750802378974
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.