The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Reliable Fault Diagnosis for Low-Speed Bearings Using Individually Trained Support Vector Machines With Kernel Discriminative Feature Analysis
Open accessAbstract
This paper proposes a highly reliable fault diagnosis approach for low-speed bearings. The proposed approach first extracts wavelet-based fault features that represent diverse symptoms of multiple low-speed bearing defects. The most useful fault features for diagnosis are then selected by utilizing a genetic algorithm (GA)-based kernel discriminative feature analysis cooperating with one-against-all multicategory support vector machines (OAA MCSVMs). Finally, each support vector machine is individually trained with its own feature vector that includes the most discriminative fault features, offering the highest classification performance. In this study, the effectiveness of the proposed GA-based kernel discriminative feature analysis and the classification ability of individually trained OAA MCSVMs are addressed in terms of average classification accuracy. In addition, the proposed GA-based kernel discriminative feature analysis is compared with four other state-of-the-art feature analysis approaches. Experimental results indicate that the proposed approach is superior to other feature analysis methodologies, yielding an average classification accuracy of 98.06% and 94.49% under rotational speeds of 50 revolutions-per-minute (RPM) and 80 RPM, respectively. Furthermore, the individually trained MCSVMs with their own optimal fault features based on the proposed GA-based kernel discriminative feature analysis outperform the standard OAA MCSVMs, showing an average accuracy of 98.66% and 95.01% for bearings under rotational speeds of 50 RPM and 80 RPM, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Top 10 algorithms in data mining
Wu, X., Kumar, V., Ross Quinlan, J., Ghosh, J., Yang, Q., Motoda, H., McLachlan, G. J., Ng, A., Liu, B., Yu, P. S., et al. (2008) · Knowledge and Information Systems · doi:10.1007/s10115-007-0114-2 · Cited by 5,667
Sensitivity Analysis of k-Fold Cross Validation in Prediction Error Estimation
Rodriguez, J. D., Perez, A., & Lozano, J. A. (2010) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2009.187 · Cited by 1,890
Fault diagnosis of low speed bearing based on relevance vector machine and support vector machine
Widodo, A., Kim, E. Y., Son, J.-D., Yang, B.-S., Tan, A. C. C., Gu, D.-S., Choi, B.-K., & Mathew, J. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.09.033 · Cited by 324
Self-citationWidodo, A., Yang, B.-S., Kim, E. Y., Tan, A. C. C., & Mathew, J. (2009) · Nondestructive Testing and Evaluation · doi:10.1080/10589750802378974 · Cited by 58
Self-citation
Research works printed but not linked: 64
- 10.1016/j.neucom.2012.11.012 · DOI
- 10.1016/j.ymssp.2009.09.002 · DOI
- 10.1016/j.ymssp.2012.09.015 · DOI · Paper page
- 10.1016/j.jsv.2012.08.017 · DOI
- 10.1115/1.4023814 · doi:10.1115/1.4023814
- 10.1016/j.ymssp.2013.04.005 · doi:10.1016/j.ymssp.2013.04.005
- 10.1016/j.eswa.2010.12.095 · DOI · Paper page
- 10.1016/j.measurement.2012.01.001 · DOI
- 10.1016/j.ymssp.2011.08.002 · DOI · Paper page
- 10.1049/iet-smt.2011.0082 · DOI
- 10.1007/978-1-84628-814-2_22 · DOI
- kim, 2007, Experimental study on condition monitoring of low speed bearings: Time domain analysis, Proc Australasian Cong Appl Mechatronics
- kim, 2007, A comparative study on the application of acoustic emission technique and acceleration measurements for low speed condition monitoring, Proc Asia-Pac Vib Conf
- 10.1016/j.ymssp.2012.06.004 · DOI
- 10.1016/j.ymssp.2013.07.006 · DOI · Paper page
- 10.1109/TPEL.2013.2273292 · DOI · Paper page
- 10.1016/S0301-679X(99)00077-8 · DOI · Paper page
- 10.1049/iet-spr.2010.0311 · doi:10.1049/iet-spr.2010.0311
- 10.1016/j.asoc.2009.11.003 · doi:10.1016/j.asoc.2009.11.003
- 10.1016/j.ymssp.2013.02.020 · DOI
- 10.1007/s00365-012-9153-3 · DOI
- 10.1109/TIE.2013.2273471 · DOI · Paper page
- 10.1007/s12206-013-0608-7 · doi:10.1007/s12206-013-0608-7
- 10.1111/j.1475-1305.2010.00776.x · doi:10.1111/j.1475-1305.2010.00776.x
- 10.1016/j.ymssp.2010.06.010 · doi:10.1016/j.ymssp.2010.06.010
- 10.1016/j.engfracmech.2009.09.016 · doi:10.1016/j.engfracmech.2009.09.016
- yoshioka, 1984, Application of acoustic emission technique to detection of rolling bearing failure, Amer Soc Mech Eng, 14, 55
- 10.1016/j.engfailanal.2008.06.005 · doi:10.1016/j.engfailanal.2008.06.005
- 10.1016/j.ymssp.2013.05.017 · DOI · Paper page
- 10.1016/j.measurement.2013.06.038 · DOI
- 10.1016/j.eswa.2010.12.149 · doi:10.1016/j.eswa.2010.12.149
- 10.1016/j.eswa.2010.12.034 · DOI
- 10.1016/j.eswa.2013.11.026 · doi:10.1016/j.eswa.2013.11.026
- 10.1016/j.engstruct.2010.08.012 · DOI · Paper page
- 10.1016/j.ymssp.2011.03.002 · DOI · Paper page
- 10.1016/j.eswa.2011.04.060 · DOI
- 10.1016/j.eswa.2013.06.006 · DOI
- 10.1109/TIM.2010.2045927 · DOI · Paper page
- 10.1109/TIE.2009.2026770 · DOI · Paper page
- 10.1016/j.asoc.2011.03.014 · DOI · Paper page
- 10.1109/TIA.2009.2023566 · DOI · Paper page
- 10.1109/TIE.2008.2003211 · DOI
- 10.1109/TIE.2008.2005018 · DOI · Paper page
- 10.1109/TMECH.2008.918535 · DOI
- 10.1109/TIE.2012.2230598 · DOI · Paper page
- 10.1109/TIA.2010.2049623 · DOI · Paper page
- 10.1016/j.eswa.2013.01.033 · DOI · Paper page
- 10.1007/s00170-013-5222-4 · doi:10.1007/s00170-013-5222-4
- 10.1109/TII.2012.2231084 · DOI
- 10.1109/TPEL.2013.2257869 · DOI · Paper page
- 10.1109/MIM.2013.6495676 · DOI
- 10.1109/TIE.2012.2219838 · DOI · Paper page
- 10.1109/TIE.2012.2188259 · DOI
- 10.1109/MIM.2013.6495681 · doi:10.1109/mim.2013.6495681
- 10.1109/TIE.2011.2167893 · DOI · Paper page
- 10.1109/TIM.2008.927211 · DOI
- 10.1109/TIM.2009.2016292 · doi:10.1109/tim.2009.2016292
- 10.1016/j.ymssp.2009.11.011 · DOI · Paper page
- 10.1016/j.sigpro.2013.04.015 · DOI · Paper page
- 10.1016/j.ymssp.2008.07.002 · doi:10.1016/j.ymssp.2008.07.002
- 10.1016/j.neucom.2011.01.021 · DOI · Paper page
- 10.1016/j.measurement.2011.06.011 · DOI
- 10.1016/j.eswa.2009.12.051 · DOI · Paper page
- 10.1177/1077546310395970 · doi:10.1177/1077546310395970
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks
Xia, M., Li, T., Xu, L., Liu, L., & de Silva, C. W. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2728371 · Cited by 723
Metadata
- Authors
- Kang, M., Kim, J., Kim, J.-M., Tan, A. C. C., Kim, E. Y., & Choi, B.-K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-05
- Volume
- 30
- Issue
- 5
- Pages
- 2786-2797
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1982878030
- Cited by
- 169
- References
- 4
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- green
- Funders
- National Research Foundation of Korea (NRF)
- Korea government (MSIP) (NRF-2013R1A2A2A05004566)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reliable Fault Diagnosis for Low-Speed Bearings Using Individually Trained Support Vector Machines With Kernel Discriminative Feature Analysis. https://app.cochat.ai/papers/10.1109/tpel.2014.2358494
- The paper
- Kang, M., Kim, J., Kim, J.-M., Tan, A. C. C., Kim, E. Y., & Choi, B.-K. (2015). Reliable Fault Diagnosis for Low-Speed Bearings Using Individually Trained Support Vector Machines With Kernel Discriminative Feature Analysis. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2014.2358494
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.