Time-Varying and Multiresolution Envelope Analysis and Discriminative Feature Analysis for Bearing Fault Diagnosis
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
This paper presents a reliable fault diagnosis methodology for various single and multiple combined defects of low-speed rolling element bearings. This method temporally partitions an acoustic emission (AE) signal and selects a portion of the signal, which contains intrinsic information about the bearing failures. This paper then performs frequency analysis for the selected time-domain AE signal by using multilevel finite-impulse response filter banks to obtain the most informative subband signals involving abnormal symptoms of the bearing defects. It does this by using a 2-D visualization tool that represents the percentage of the Gaussian-mixture-model-based residual component-to-defect component ratios via time-varying and multiresolution envelope analysis (TVMREA). Then, fault signatures in the time and frequency domains are extracted in the informative subband signals. Since all the extracted fault features may not be equally useful for diagnosis, the proposed genetic algorithm (GA)-based discriminative feature analysis (GADFA) selects the most discriminative subset of fault signatures. In experiments, single and multiple combined bearing defects under various conditions are used to validate the effectiveness of this fault diagnosis scheme using TVMREA and GADFA. Experimental results indicate that this reliable fault diagnosis methodology accurately identifies bearing failure type across a variety of conditions. In addition, GADFA outperforms other state-of-the-art feature analysis techniques, yielding 7.3%-46.6% performance improvements in average classification accuracy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sensitivity Analysis of k-Fold Cross Validation in Prediction Error Estimation
Rodriguez, J. D., Perez, A., & Lozano, J. A. (2010) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2009.187 · Cited by 1,890
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377
Pandya, D. H., Upadhyay, S. H., & Harsha, S. P. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.01.033 · Cited by 350 · cited 3×
“At the ith iteration in k-cv, fold Si is reserved as a training set for the k-NN (i.e., Ntrsamples = floor(Nsamples/k)), and the remaining folds are used to test the k-NN (i.e., Ntestsamples = Nsamples −Ntrsamples).”
MethodInfluentialFault diagnosis of low speed bearing based on relevance vector machine and support vector machine
Widodo, A., Kim, E. Y., Son, J.-D., Yang, B.-S., Tan, A. C. C., Gu, D.-S., Choi, B.-K., & Mathew, J. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.09.033 · Cited by 324 · cited 5×
“In fact, GADFA achieves 7.3%–46.6% improved performance over TRLDA, ICA, and PCA in average classification accuracy.”
MethodInfluentialShe, X., Huang, A. Q., Wang, F., & Burgos, R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216245 · Cited by 161 · cited 1×
“sion systems (WECSs), which convert the kinetic energy of the wind into electricity, are one of the most rapidly growing sources of new electricity generation [1], [2].”
BackgroundWidodo, A., Yang, B.-S., Kim, E. Y., Tan, A. C. C., & Mathew, J. (2009) · Nondestructive Testing and Evaluation · doi:10.1080/10589750802378974 · Cited by 58 · cited 4×
“As stated earlier, this paper uses the analysis data set and explores the influence of different numbers of discriminant, independent, or principal components across ten times k-cv to decide the most efficient n components for bearing fault diagnosis via TRLDA, ICA, and PCA, as shown in Fig 13.”
MethodInfluential
Cited by
Failure Prognosis and Applications—A Survey of Recent Literature
Kordestani, M., Saif, M., Orchard, M. E., Razavi-Far, R., & Khorasani, K. (2021) · IEEE Transactions on Reliability · doi:10.1109/tr.2019.2930195 · Cited by 305
GNAR-GARCH model and its application in feature extraction for rolling bearing fault diagnosis
Ma, J., Xu, F., Huang, K., & Huang, R. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.043 · Cited by 59
Novel Bearing Fault Diagnosis Using Gaussian Mixture Model-Based Fault Band Selection
Maliuk, A. S., Prosvirin, A. E., Ahmad, Z., Kim, C. H., & Kim, J.-M. (2021) · Sensors · doi:10.3390/s21196579 · Cited by 44
Self-citationGear fault diagnosis using Autogram analysis
Afia, A., Rahmoune, C., & Benazzouz, D. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018812534 · Cited by 34
Metadata
- Authors
- Kang, M., Kim, J., Wills, L. M., & Kim, J.-M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-12
- Volume
- 62
- Issue
- 12
- Pages
- 7749-7761
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2028899550
- Cited by
- 146
- References
- 6
- FWCI
- 17.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Time-Varying and Multiresolution Envelope Analysis and Discriminative Feature Analysis for Bearing Fault Diagnosis. https://app.cochat.ai/papers/10.1109/tie.2015.2460242
- The paper
- Kang, M., Kim, J., Wills, L. M., & Kim, J.-M. (2015). Time-Varying and Multiresolution Envelope Analysis and Discriminative Feature Analysis for Bearing Fault Diagnosis. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2015.2460242
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.