Cationic Polymerization of 1,5-Dioxepan-2-one with Lewis Acids in Bulk and Solution
The DOI matches its Crossref record.
Abstract
1,5-Dioxepane-2-one (DXO) was coordinatively ring-opening polymerized with different Lewis acids in bulk and solution. The reactivities of a series of initiators (SnCl4, FeCl3, AlCl3, BCl3, and BF3OEt2) at different temperatures and reaction times were analyzed. Polymerization of DXO in bulk with SnCl4, FeCl3, AlCl3, and BCl3 gave only oligomers or low molecular weight polymers irrespective of temperature and/or reaction time. Polymerization of DXO with BF3OEt2 at 70°C gave yields of nearly 100% and molecular weights up to M w = 10,000. The polymerization temperature was increased to 100°C and the reaction time prolonged, which resulted in nearly equal molecular weights as at 70°C but with lower yields, higher polydispersity, and generally not full conversion. In addition, side reactions, such as backbiting, transesterification and thermal degradation, occurred to a larger extent at higher reaction temperatures. Solution polymerization using the same initiators and THF, dioxane, or nitrobenzene as the solvent gave polymers of low molecular weights and of low yields, except with FeCl3 and BF3OEt2. The rates of polymerization were significantly higher in nitrobenzene than in dioxane and THF due to polarity and coordination of these solvents to the growing chain. Comparison of the initiators BF3OEt2 and SnCl4 in solution polymerization showed equal reactivity in nitrobenzene for both of them. The BF3OEt2-initiated systems give polymers with lower molecular weights than SnCl4-initiated systems, but with narrower polydispersity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Organocatalytic Ring-Opening Polymerization
Kamber, N. E., Jeong, W., Waymouth, R. M., Pratt, R. C., Lohmeijer, B. G. G., & Hedrick, J. L. (2007) · Chemical Reviews · doi:10.1021/cr068415b · Cited by 1,489
Aliphatic Polyesters: Synthesis, Properties and Applications
Albertsson, A.-C., & Varma, I. K. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_1 · Cited by 500
Self-citationControlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture
Stridsberg, K. M., Ryner, M., & Albertsson, A.-C. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_2 · Cited by 375
Self-citationRecent Developments in Ring-Opening Polymerization of Lactones
Lecomte, P., & Jérôme, C. (2011) · Advances in Polymer Science · doi:10.1007/12_2011_144 · Cited by 163
Polycaprolactone: Synthesis, Properties, and Applications
Guarino, V., Gentile, G., Sorrentino, L., & Ambrosio, L. (2017) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst658 · Cited by 163
Metadata
- Authors
- Albertsson, A.-C., & Palmgren, R.
- Venue
- Journal of Macromolecular Science, Part A
- Publisher
- Informa UK Limited
- Published
- 1996-06
- Volume
- 33
- Issue
- 6
- Pages
- 747-758
- ISSN
- 1060-1325 (ISSN-L)
- 1520-5738
- OpenAlex
- W2087591330
- Cited by
- 21
- References
- 0
- FWCI
- 0.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cationic Polymerization of 1,5-Dioxepan-2-one with Lewis Acids in Bulk and Solution. https://app.cochat.ai/papers/10.1080/10601329608010891
- The paper
- Albertsson, A.-C., & Palmgren, R. (1996). Cationic Polymerization of 1,5-Dioxepan-2-one with Lewis Acids in Bulk and Solution. Journal of Macromolecular Science, Part A. https://doi.org/10.1080/10601329608010891
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.