The DOI matches its Crossref record.
Glass Transition Behavior of Spray Dried Orange Juice Powder Measured by Differential Scanning Calorimetry (DSC) and Thermal Mechanical Compression Test (TMCT)
Abstract
Spray drying behavior of orange juice concentrate with various levels of maltodextrin (DE 6) was studied. Five combinations of orange juice concentrate and maltodextrin (25:75, 30:70, 35:65, 40:60, and 50:50) were spray dried at 160 and 65°C inlet and outlet temperatures, respectively. The product recovered with 50% maltodextrin concentration was sticky and only 20% powder was recovered. The recovery of orange juice powder increased as the amount of maltodextrin in powders increased. The particle size and bulk density remained almost the same in all except in 50% maltodextrin powder which was slightly larger and more dense. The moisture content of spray dried powders was high and desiccated before measuring glass transition temperature. The anhydrous spray dried powders showed increased Tg values with increasing maltodextrin concentration, from 66°C in 50% maltodextrin to 97°C in 75% maltodextrin containing powders. The glass rubber transition (Tg-r) values of all the products measured using novel Thermal Mechanical Compression Test (TMCT) were higher than Tg values measured by DSC; the difference in values increased with increase in maltodextrin concentration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Caparino, O. A., Tang, J., Nindo, C. I., Sablani, S. S., Powers, J. R., & Fellman, J. K. (2012) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2012.01.010 · Cited by 680
Tonon, R. V., Brabet, C., & Hubinger, M. D. (2010) · Food Research International · doi:10.1016/j.foodres.2009.12.013 · Cited by 557
Fazaeli, M., Emam-Djomeh, Z., Kalbasi Ashtari, A., & Omid, M. (2012) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2012.04.006 · Cited by 543
Bhusari, S. N., Muzaffar, K., & Kumar, P. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.06.038 · Cited by 279
Dry fractionation for sustainable production of plant protein concentrates
Pelgrom, P. J. M. (2024) · doi:10.18174/331968 · Cited by 6
Metadata
- Authors
- Shrestha, A. K., Ua-arak, T., Adhikari, B. P., Howes, T., & Bhandari, B. R.
- Venue
- International Journal of Food Properties
- Publisher
- Informa UK Limited
- Published
- 2007-07-31
- Volume
- 10
- Issue
- 3
- Pages
- 661-673
- ISSN
- 1094-2912 (ISSN-L)
- 1532-2386
- OpenAlex
- W2038339574
- Cited by
- 200
- References
- 0
- FWCI
- 9.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Glass Transition Behavior of Spray Dried Orange Juice Powder Measured by Differential Scanning Calorimetry (DSC) and Thermal Mechanical Compression Test (TMCT). https://app.cochat.ai/papers/10.1080/10942910601109218
- The paper
- Shrestha, A. K., Ua-arak, T., Adhikari, B. P., Howes, T., & Bhandari, B. R. (2007). Glass Transition Behavior of Spray Dried Orange Juice Powder Measured by Differential Scanning Calorimetry (DSC) and Thermal Mechanical Compression Test (TMCT). International Journal of Food Properties. https://doi.org/10.1080/10942910601109218
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.