Parameters that Bias the Measurement of Airborne Concentration Within a Respirator
The DOI matches its Crossref record.
Abstract
This paper describes the theoretical basis upon which a test system has been set up to evaluate the sampling error associated with in-facepiece sampling on half-mask respirators. The in-facepiece sampling technique evaluated in this study is the one currently used in the U.S. to conduct quantitative facepiece fit testing. An experimental design was developed to study the sampling bias associated with in-facepiece sampling when selected parameters of the man/respirator system were varied. The results indicated that significant errors can be made in estimating concentration within a respirator when the current in-facepiece sampling technique is employed. Sampling bias was determined when in-facepiece samples were collected only during the inhalation phase of the respiratory cycles. They were found to range from greater than -99% to greater than +98%. The mean sampling bias was -17 +/- 38%. When measured in-facepiece concentrations were used to calculate a fit factor the resulting range was 44 to 4728 even though the actual fit factor was only 87. Based upon the data presented, it was hypothesized that faceseal leakage was streamlining within the respirator cavity. As a result, quantitative facepiece fit data on half-mask respirators may be biased by the large measurement error.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Still being checked.
Cited by
Grinshpun, S. A., Haruta, H., Eninger, R. M., Reponen, T., McKay, R. T., & Lee, S.-A. (2009) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459620903120086 · Cited by 353
An upper bound on one-to-one exposure to infectious human respiratory particles
Bagheri, G., Thiede, B., Hejazi, B., Schlenczek, O., & Bodenschatz, E. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2110117118 · Cited by 143
Large Particle Penetration through N95 Respirator Filters and Facepiece Leaks with Cyclic Flow
(2009) · The Annals of Occupational Hygiene · doi:10.1093/annhyg/mep062 · Cited by 42
Cho, K. J., Jones, S., Jones, G., McKay, R., Grinshpun, S. A., Dwivedi, A., Shukla, R., Singh, U., & Reponen, T. (2010) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2010.513910 · Cited by 40
Respirator Protection and Acceptability Among Agricultural Workers
Popendorf, W. J., Merchant, J. A., Leonard, S., Burmeister, L. F., & Olenchock, S. A. (1995) · Applied Occupational and Environmental Hygiene · doi:10.1080/1047322x.1995.10387652 · Cited by 29
Metadata
- Authors
- MYERS, W. R., ALLENDER, J., PLUMMER, R., & STOBBE, T.
- Affiliations
- National Institute for Occupational Safety and Health (US)
- West Virginia University (US)
- Venue
- American Industrial Hygiene Association Journal
- Publisher
- Informa UK Limited
- Published
- 1986-02
- Volume
- 47
- Issue
- 2
- Pages
- 106-114
- ISSN
- 0002-8894 (ISSN-L)
- OpenAlex
- W2059282197
- Cited by
- 36
- References
- 0
- Citations by year
- 2024: 1 · 2023: 1 · 2021: 3 · 2016: 1 · 2015: 2 · 2014: 2 · 2012: 1
- FWCI
- 5.61
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- American Industrial Hygiene Association Journal (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Occupational Health and Safety in Workplaces
- Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Occupational Health and Performance
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Industrial and Mining Safety
- Keywords
- half-mask respirators, sampling bias, fit factor
- MeSH terms
- Acetone, Aerosols, Air, Air Pollutants, Humans, Methods, Models, Biological, Quality Control, Respiration, Ventilators, Mechanical
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Parameters that Bias the Measurement of Airborne Concentration Within a Respirator. https://app.cochat.ai/papers/10.1080/15298668691389423
- The paper
- MYERS, W. R., ALLENDER, J., PLUMMER, R., & STOBBE, T. (1986). Parameters that Bias the Measurement of Airborne Concentration Within a Respirator. American Industrial Hygiene Association Journal. https://doi.org/10.1080/15298668691389423
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.