Mixed Matrix Membranes for Water Purification Applications
Open accessThe DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Abstract
Membrane technology has been utilized for water purification application for a long time. Both polymeric and ceramic membranes have been center of interest for their tremendous contribution in this area. Despite their advantages, these synthetic membranes have limitations in terms of performance and durability. To meet the new demands and standards, mixed matrix membranes (MMM) have gained serious importance due to their ability to combine the features of the aforementioned membrane materials, offering better solutions in terms of performance, fouling, permeate quality and longevity. Besides such attractive features, MMMs have not yet reached sufficient maturity to challenge conventional membranes commercially. This review categorizes MMMs on its filler basis into four types; (i) inorganic filler-based MMMs, (ii) organic filler-based MMMs, (iii) biofillers-based MMMd, and (iv) hybrid filler-based MMMs. A discussion is extended to modules and cost of these membranes along with the specific applications of each type of fillers. It also identifies the issues and challenges in the MMM area and highlights the domains that remain to be investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Science and technology for water purification in the coming decades
Shannon, M. A., Bohn, P. W., Elimelech, M., Georgiadis, J. G., Mariñas, B. J., & Mayes, A. M. (2008) · Nature · doi:10.1038/nature06599 · Cited by 8,465 · cited 2×
“Membranes have become the most viable option and alternate to the previous technologies (2, 6).”
BackgroundMembrane Technology and Applications
Baker, R. W. (2004) · Wiley eBooks · doi:10.1002/0470020393 · Cited by 3,956
Applications of nanotechnology in water and wastewater treatment
Qu, X., Alvarez, P. J. J., & Li, Q. (2013) · Water Research · doi:10.1016/j.watres.2012.09.058 · Cited by 2,444
Li, Q., Mahendra, S., Lyon, D. Y., Brunet, L., Liga, M. V., Li, D., & Alvarez, P. J. J. (2008) · Water Research · doi:10.1016/j.watres.2008.08.015 · Cited by 2,385
Lee, K. P., Arnot, T. C., & Mattia, D. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.12.036 · Cited by 2,148 · cited 2×
“Reprinted from (40) with permission from Elsevier.”
MethodA review of water treatment membrane nanotechnologies
Pendergast, M. M., & Hoek, E. M. V. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00541j · Cited by 2,078 · cited 3×
“These inorganic fillers are prepared through processes such as sol gel, inert gas condensation, pulsed laser ablation, spark discharge generation, ion sputtering, spray pyrolysis, photothermal synthesis, thermal plasma synthesis, flame synthesis, low-temperature reactive synthesis, flame spray pyrolysis, mechanical al…”
BackgroundMethodInfluentialAdvanced functional polymer membranes
Ulbricht, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.084 · Cited by 2,029
Use of iron oxide nanomaterials in wastewater treatment: A review
Xu, P., Zeng, G. M., Huang, D. L., Feng, C. L., Hu, S., Zhao, M. H., Lai, C., Wei, Z., Huang, C., Xie, G. X., et al. (2012) · Science of The Total Environment · doi:10.1016/j.scitotenv.2012.02.023 · Cited by 1,929
Chung, T.-S., Jiang, L. Y., Li, Y., & Kulprathipanja, S. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.008 · Cited by 1,781 · cited 2×
“However mechanical strength and rejection rate are also concerned by the channel density (31, 53, 56).”
BackgroundSelf‐Assembled 3D Flowerlike Iron Oxide Nanostructures and Their Application in Water Treatment
Zhong, L. ‐., Hu, J. ‐., Liang, H. ‐., Cao, A. ‐., Song, W. ‐., & Wan, L. ‐. (2006) · Advanced Materials · doi:10.1002/adma.200600504 · Cited by 1,587
Environmental Applications of Carbon-Based Nanomaterials
Mauter, M. S., & Elimelech, M. (2008) · Environmental Science & Technology · doi:10.1021/es8006904 · Cited by 1,576 · cited 1×
“CNTs have been functionalized, aligned and sometimes both modifications are employed (103).”
MethodA review on nanomaterials for environmental remediation
Khin, M. M., Nair, A. S., Babu, V. J., Murugan, R., & Ramakrishna, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21818f · Cited by 1,473
Interfacial polymerization of thin film nanocomposites: A new concept for reverse osmosis membranes
Jeong, B.-H., Hoek, E. M. V., Yan, Y., Subramani, A., Huang, X., Hurwitz, G., Ghosh, A. K., & Jawor, A. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.02.025 · Cited by 1,307
Nanomaterials and Water Purification: Opportunities and Challenges
Savage, N., & Diallo, M. S. (2005) · Journal of Nanoparticle Research · doi:10.1007/s11051-005-7523-5 · Cited by 1,221 · cited 2×
“Reprinted from (102) with permission of Springer.”
BackgroundAssessing the Risks of Manufactured Nanomaterials
Wiesner, M. R., Lowry, G. V., Alvarez, P., Dionysiou, D., & Biswas, P. (2006) · Environmental Science & Technology · doi:10.1021/es062726m · Cited by 1,160
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
A review on membrane fabrication: Structure, properties and performance relationship
Lalia, B. S., Kochkodan, V., Hashaikeh, R., & Hilal, N. (2013) · Desalination · doi:10.1016/j.desal.2013.06.016 · Cited by 1,109
Polymeric membranes incorporated with metal/metal oxide nanoparticles: A comprehensive review
Ng, L. Y., Mohammad, A. W., Leo, C. P., & Hilal, N. (2013) · Desalination · doi:10.1016/j.desal.2010.11.033 · Cited by 1,033
Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates
Zinadini, S., Zinatizadeh, A. A., Rahimi, M., Vatanpour, V., & Zangeneh, H. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.10.070 · Cited by 1,003 · cited 2×
“In this work the graphene oxide PES addition enhanced the membrane selectivity and dye rejection up to 99% (63).”
BackgroundMethodA review of pressure‐driven membrane processes in wastewater treatment and drinking water production
Van Der Bruggen, B., Vandecasteele, C., Van Gestel, T., Doyen, W., & Leysen, R. (2003) · Environmental Progress · doi:10.1002/ep.670220116 · Cited by 988
Li, Y.-H., Ding, J., Luan, Z., Di, Z., Zhu, Y., Xu, C., Wu, D., & Wei, B. (2003) · Carbon · doi:10.1016/s0008-6223(03)00392-0 · Cited by 965
Development of antifouling reverse osmosis membranes for water treatment: A review
Kang, G.-D., & Cao, Y.-M. (2012) · Water Research · doi:10.1016/j.watres.2011.11.041 · Cited by 916
Drawbacks of applying nanofiltration and how to avoid them: A review
Van der Bruggen, B., Mänttäri, M., & Nyström, M. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2008.05.010 · Cited by 878
Electrospun nanofibrous filtration membrane
GOPAL, R., KAUR, S., MA, Z., CHAN, C., RAMAKRISHNA, S., & MATSUURA, T. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.04.026 · Cited by 856 · cited 1×
“Their ability to attach themselves on a substrate through chemical reactions or binding themselves, especially with a hydrophobic surface makes them a better option for developing specialized (antifouling, highly hydrophilic, specific component rejection or higher porosity) membranes (126, 127).”
BackgroundRezakazemi, M., Ebadi Amooghin, A., Montazer-Rahmati, M. M., Ismail, A. F., & Matsuura, T. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.01.003 · Cited by 853 · cited 1×
“Also, comprehensive reviews on MMM synthesis, modification and application can be consulted for a better understanding of their use in various applications (25, 26).”
BackgroundPerformance studies of mixed matrix membranes for gas separation: A review
Aroon, M. A., Ismail, A. F., Matsuura, T., & Montazer-Rahmati, M. M. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2010.08.023 · Cited by 852 · cited 3×
“However mechanical strength and rejection rate are also concerned by the channel density (31, 53, 56).”
BackgroundMetal–organic framework based mixed matrix membranes: a solution for highly efficient CO2capture?
Seoane, B., Coronas, J., Gascon, I., Benavides, M. E., Karvan, O., Caro, J., Kapteijn, F., & Gascon, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00437j · Cited by 845
Advanced Membrane Technology and Applications
(2008) · Wiley eBooks · doi:10.1002/9780470276280 · Cited by 829
Kim, J., & Van der Bruggen, B. (2010) · Environmental Pollution · doi:10.1016/j.envpol.2010.03.024 · Cited by 827
Noble metal nanoparticles for water purification: A critical review
Pradeep, T., & Anshup (2009) · Thin Solid Films · doi:10.1016/j.tsf.2009.03.195 · Cited by 805
Fundamental water and salt transport properties of polymeric materials
Geise, G. M., Paul, D. R., & Freeman, B. D. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.001 · Cited by 783
Hilal, N., Al-Zoubi, H., Darwish, N. A., Mohamma, A. W., & Abu Arabi, M. (2004) · Desalination · doi:10.1016/j.desal.2004.01.007 · Cited by 771
Kumar, M., Grzelakowski, M., Zilles, J., Clark, M., & Meier, W. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708762104 · Cited by 716
Nanotechnology and Water Treatment: Applications and Emerging Opportunities
Theron, J., Walker, J. A., & Cloete, T. E. (2008) · Critical Reviews in Microbiology · doi:10.1080/10408410701710442 · Cited by 716
The influence of nano-sized TiO2 fillers on the morphologies and properties of PSF UF membrane
Yang, Y., Zhang, H., Wang, P., Zheng, Q., & Li, J. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.11.019 · Cited by 697
Effect of TiO2 nanoparticles on the surface morphology and performance of microporous PES membrane
Li, J.-F., Xu, Z.-L., Yang, H., Yu, L.-Y., & Liu, M. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.07.139 · Cited by 655 · cited 1×
“Some of these fillers are silica (87, 88), zeolite (89–91), TiO2 (45, 92), carbon nanotubes (93–95), multi-walled carbon nanotubes (CNT) (96–99), and silver (100, 101).”
BackgroundPolysulfone/silica nanoparticle mixed-matrix membranes for gas separation
Ahn, J., Chung, W.-J., Pinnau, I., & Guiver, M. D. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.01.031 · Cited by 628
Kim, S. H., Kwak, S.-Y., Sohn, B.-H., & Park, T. H. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00418-0 · Cited by 622 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundVatanpour, V., Madaeni, S. S., Moradian, R., Zinadini, S., & Astinchap, B. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.02.014 · Cited by 507
Zornoza, B., Tellez, C., Coronas, J., Gascon, J., & Kapteijn, F. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.03.012 · Cited by 495 · cited 1×
“Moreover, introduction of metal organic framework (MOF)based fillers in purification area is also gaining huge attention because of the distinctive features of this MOF sophisticated nanostructure that is highly porous, with tunable pores, high thermal and chemical resistance, catalytic character, and freedom to selec…”
BackgroundZhao, H., Qiu, S., Wu, L., Zhang, L., Chen, H., & Gao, C. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.09.014 · Cited by 476
Influence of Zeolite Crystal Size on Zeolite-Polyamide Thin Film Nanocomposite Membranes
Lind, M. L., Ghosh, A. K., Jawor, A., Huang, X., Hou, W., Yang, Y., & Hoek, E. M. V. (2009) · Langmuir · doi:10.1021/la900938x · Cited by 448
Advanced technologies in water and wastewater treatment
Zhou, H., & Smith, D. W. (2002) · Journal of Environmental Engineering and Science · doi:10.1139/s02-020 · Cited by 446
Luo, M.-L., Zhao, J.-Q., Tang, W., & Pu, C.-S. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2004.11.054 · Cited by 430 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundMa, N., Wei, J., Liao, R., & Tang, C. Y. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.03.002 · Cited by 423
A new outlook on membrane enhancement with nanoparticles: The alternative of ZnO
Balta, S., Sotto, A., Luis, P., Benea, L., Van der Bruggen, B., & Kim, J. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.10.025 · Cited by 420 · cited 2×
“They deduced that permeation of PES/ZnO membrane improved due to the hydrophilic nature of ZnO and subsequent macrovoids formation in the PES/ZnO MMM (49).”
BackgroundKim, E.-S., Hwang, G., Gamal El-Din, M., & Liu, Y. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.11.041 · Cited by 406 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundBoehmite nanoparticles as a new nanofiller for preparation of antifouling mixed matrix membranes
Vatanpour, V., Madaeni, S. S., Rajabi, L., Zinadini, S., & Derakhshan, A. A. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.01.040 · Cited by 401
Bet-moushoul, E., Mansourpanah, Y., Farhadi, K., & Tabatabaei, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.124 · Cited by 385 · cited 2×
“Some of these potential applications reported in literature include blood purification (12, 13), toxins removal from human plasma (14), methanol fuel cell (15), sensors and biosensors (16), and wound dressing (17).”
BackgroundSynthesis of novel silica-polyamide nanocomposite membrane with enhanced properties
Jadav, G. L., & Singh, P. S. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.12.014 · Cited by 381 · cited 1×
“Some of these fillers are silica (87, 88), zeolite (89–91), TiO2 (45, 92), carbon nanotubes (93–95), multi-walled carbon nanotubes (CNT) (96–99), and silver (100, 101).”
BackgroundBiomimetic membranes: A review
Shen, Y.-X., Saboe, P. O., Sines, I. T., Erbakan, M., & Kumar, M. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.12.019 · Cited by 380
Challenges and trends in membrane technology implementation for produced water treatment: A review
Alzahrani, S., & Mohammad, A. W. (2014) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2014.09.007 · Cited by 369
Zhao, Y., Qiu, C., Li, X., Vararattanavech, A., Shen, W., Torres, J., Hélix‐Nielsen, C., Wang, R., Hu, X., Fane, A. G., et al. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.08.039 · Cited by 360
Bonyadi, S., & Chung, T. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.08.034 · Cited by 359
Desalination by biomimetic aquaporin membranes: Review of status and prospects
Tang, C. Y., Zhao, Y., Wang, R., Hélix‐Nielsen, C., & Fane, A. G. (2012) · Desalination · doi:10.1016/j.desal.2012.07.007 · Cited by 354
Khan, N. A., Jung, B. K., Hasan, Z., & Jhung, S. H. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.03.047 · Cited by 333 · cited 1×
“For instance, selected MOFs, which are currently being used are MIL-53(Cr), MIL101(Cr), MIL-100(Cr), MIL-100(Fe), ZIF-8, UiO-66 (108).”
BackgroundPreparation and characterization of PES/TiO2 composite membranes
Wu, G., Gan, S., Cui, L., & Xu, Y. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.05.221 · Cited by 331 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundHigh Pressure CO2/CH4 Separation Using Carbon Molecular Sieve Hollow Fiber Membranes
Vu, D. Q., Koros, W. J., & Miller, S. J. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010119w · Cited by 328 · cited 1×
“Because both fillers have shown promising results for applications such as gas separation (104) and especially adsorption (105, 106), their inclusion as a filler for water purification could be of great interest.”
BackgroundComprehensive Membrane Science and Engineering
(2010) · Elsevier eBooks · doi:10.1016/c2009-1-28385-7 · Cited by 327
Rahimpour, A., & Madaeni, S. S. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.08.030 · Cited by 323
Taurozzi, J. S., Arul, H., Bosak, V. Z., Burban, A. F., Voice, T. C., Bruening, M. L., & Tarabara, V. V. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.07.010 · Cited by 323 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundDaraei, P., Madaeni, S. S., Ghaemi, N., Salehi, E., Khadivi, M. A., Moradian, R., & Astinchap, B. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.05.007 · Cited by 314
Kim, H. J., Choi, K., Baek, Y., Kim, D.-G., Shim, J., Yoon, J., & Lee, J.-C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405398f · Cited by 303
Li, J.-H., Xu, Y.-Y., Zhu, L.-P., Wang, J.-H., & Du, C.-H. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.10.049 · Cited by 276 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundCarbon nanotubes for desalination: Performance evaluation and current hurdles
Goh, P. S., Ismail, A. F., & Ng, B. C. (2013) · Desalination · doi:10.1016/j.desal.2012.07.040 · Cited by 263
Nano‐Composites for Water Remediation: A Review
Tesh, S. J., & Scott, T. B. (2014) · Advanced Materials · doi:10.1002/adma.201401376 · Cited by 252
Gunawan, P., Guan, C., Song, X., Zhang, Q., Leong, S. S. J., Tang, C., Chen, Y., Chan-Park, M. B., Chang, M. W., Wang, K., et al. (2011) · ACS Nano · doi:10.1021/nn2038725 · Cited by 247
Long-term antimicrobial polyamide 6/silver-nanocomposites
Damm, C., Münstedt, H., & Rösch, A. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1158-5 · Cited by 237 · cited 1×
“Some of these fillers are silica (87, 88), zeolite (89–91), TiO2 (45, 92), carbon nanotubes (93–95), multi-walled carbon nanotubes (CNT) (96–99), and silver (100, 101).”
BackgroundGoh, K., Setiawan, L., Wei, L., Si, R., Fane, A. G., Wang, R., & Chen, Y. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.09.057 · Cited by 234 · cited 1×
“Furthermore they explained that additional effects of hydrodynamic resistance due to graphene oxide were nullified by its hydrophilic nature (21).”
BackgroundCai, N., Li, C., Han, C., Luo, X., Shen, L., Xue, Y., & Yu, F. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.053 · Cited by 230 · cited 1×
“Some of these potential applications reported in literature include blood purification (12, 13), toxins removal from human plasma (14), methanol fuel cell (15), sensors and biosensors (16), and wound dressing (17).”
BackgroundBiogenic silver nanoparticles (bio-Ag0) decrease biofouling of bio-Ag0/PES nanocomposite membranes
Zhang, M., Zhang, K., Gusseme, B. D., & Verstraete, W. (2012) · Water Research · doi:10.1016/j.watres.2012.01.015 · Cited by 228 · cited 1×
“Some of these fillers are silica (87, 88), zeolite (89–91), TiO2 (45, 92), carbon nanotubes (93–95), multi-walled carbon nanotubes (CNT) (96–99), and silver (100, 101).”
BackgroundPreparation and characterization of fouling-resistant TiO2 self-assembled nanocomposite membranes
Bae, T., Kim, I., & Tak, T. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.01.023 · Cited by 228
Membrane processes for a sustainable industrial growth
Buonomenna, M. G. (2013) · RSC Advances · doi:10.1039/c2ra22580h · Cited by 221
Mahmoudi, E., Ng, L. Y., Ba-Abbad, M. M., & Mohammad, A. W. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.107 · Cited by 216
Kim, W.-G., & Nair, S. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.09.047 · Cited by 215 · cited 1×
“Hence, interfacial compatibility between the two phases is of enormous importance to serve the desired purpose for such membranes (32, 48).”
BackgroundFan, Z., Wang, Z., Sun, N., Wang, J., & Wang, S. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.019 · Cited by 212 · cited 2×
“investigated the optimal concentration of PANI nanofibers in nanocomposite membranes (122).”
BackgroundSkouteris, G., Saroj, D., Melidis, P., Hai, F. I., & Ouki, S. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.03.010 · Cited by 208 · cited 1×
“Because both fillers have shown promising results for applications such as gas separation (104) and especially adsorption (105, 106), their inclusion as a filler for water purification could be of great interest.”
BackgroundHighly Permeable and Selective Pore‐Spanning Biomimetic Membrane Embedded with Aquaporin Z
Wang, H., Chung, T., Tong, Y. W., Jeyaseelan, K., Armugam, A., Chen, Z., Hong, M., & Meier, W. P. (2012) · Small · doi:10.1002/smll.201102120 · Cited by 208
Shah, P., & Murthy, C. N. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.02.042 · Cited by 207
Peng, F., Pan, F., Sun, H., Lu, L., & Jiang, Z. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.06.008 · Cited by 201
Biomimetic and bioinspired membranes: Preparation and application
Zhao, J., Zhao, X., Jiang, Z., Li, Z., Fan, X., Zhu, J., Wu, H., Su, Y., Yang, D., Pan, F., et al. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.001 · Cited by 200
Recent Advances in Gold and Silver Nanoparticles: Synthesis and Applications
Majdalawieh, A., Kanan, M. C., El-Kadri, O., & Kanan, S. M. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9526 · Cited by 191
Yin, J., Zhu, G., & Deng, B. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.03.021 · Cited by 191 · cited 1×
“A recent review by Yin and Deng defined four types (as given in Figure 5) on the basis of membrane structure and filler location in hybrid membrane structure (19).”
BackgroundKöseoğlu-İmer, D. Y., Köse‐Mutlu, B., Altınbaş, M., & Koyuncu, İ. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.10.046 · Cited by 187 · cited 1×
“Some of these fillers are silica (87, 88), zeolite (89–91), TiO2 (45, 92), carbon nanotubes (93–95), multi-walled carbon nanotubes (CNT) (96–99), and silver (100, 101).”
BackgroundSilva, T. L. S., Morales-Torres, S., Figueiredo, J. L., & Silva, A. M. T. (2015) · Desalination · doi:10.1016/j.desal.2014.11.025 · Cited by 182
Brame, J., Li, Q., & Alvarez, P. J. J. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.01.004 · Cited by 171 · cited 4×
“TABLE 2 Opportunities for engineered nanomaterials such as MMM in water treatment and reuse (61)”
BackgroundMethodInfluentialNie, C., Ma, L., Xia, Y., He, C., Deng, J., Wang, L., Cheng, C., Sun, S., & Zhao, C. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.11.005 · Cited by 168 · cited 1×
“Some of these potential applications reported in literature include blood purification (12, 13), toxins removal from human plasma (14), methanol fuel cell (15), sensors and biosensors (16), and wound dressing (17).”
BackgroundMaterial Advancements in Fabrication of Mixed‐Matrix Membranes
Nasir, R., Mukhtar, H., Man, Z., & Mohshim, D. F. (2013) · Chemical Engineering & Technology · doi:10.1002/ceat.201200734 · Cited by 164
Self-citationGoh, P. S., Ismail, A. F., & Hilal, N. (2016) · Desalination · doi:10.1016/j.desal.2015.06.002 · Cited by 163
Zhu, J., Guo, N., Zhang, Y., Yu, L., & Liu, J. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.04.016 · Cited by 159 · cited 1×
“, dextran, lysozyme, poly-sodium-4-styrene sulfonate) to achieve specific purposes such as mechanical strength (66), antibacterial property (67, 68), antifouling ability (69–71), high flux and high selectivity (55, 72).”
BackgroundDeng, F., Ge, X., Zhang, Y., Li, M., & Cho, U. R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42666 · Cited by 159
Zhao, W., Huang, J., Fang, B., Nie, S., Yi, N., Su, B., Li, H., & Zhao, C. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.11.065 · Cited by 149
Preparation of high performance nanofiltration (NF) membranes incorporated with aquaporin Z
Li, X., Wang, R., Wicaksana, F., Tang, C. Y., Torres, J., & Fane, A. G. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.09.007 · Cited by 149
Rahimpour, A., & Madaeni, S. S. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.05.036 · Cited by 145
Mixed matrix hollow fiber membranes for removal of protein-bound toxins from human plasma
Tijink, M. S. L., Wester, M., Glorieux, G., Gerritsen, K. G. F., Sun, J., Swart, P. C., Borneman, Z., Weßling, M., Vanholder, R. C., Joles, J. A., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.008 · Cited by 143 · cited 1×
“Some of these potential applications reported in literature include blood purification (12, 13), toxins removal from human plasma (14), methanol fuel cell (15), sensors and biosensors (16), and wound dressing (17).”
BackgroundGohari, R. J., Lau, W. J., Matsuura, T., & Ismail, A. F. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.06.043 · Cited by 141
A critical review on recent polymeric and nano-enhanced membranes for reverse osmosis
Giwa, A., Akther, N., Dufour, V., & Hasan, S. W. (2016) · RSC Advances · doi:10.1039/c5ra17221g · Cited by 139 · cited 1×
“A comprehensive and critical review on preparation methods, types of inorganic fillers and their specific characteristics for water purification applications is of great significance for polymeric nanocomposite membranes (73).”
BackgroundJi, Y., An, Q.-F., Guo, Y., Hung, W., Lee, K., & Gao, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00005c · Cited by 139
Gohari, R. J., Halakoo, E., Nazri, N. A. M., Lau, W. J., Matsuura, T., & Ismail, A. F. (2014) · Desalination · doi:10.1016/j.desal.2013.12.011 · Cited by 133
Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane
Fan, Z., Wang, Z., Duan, M., Wang, J., & Wang, S. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.11.012 · Cited by 131 · cited 2×
“synthesized a nanocomposite membrane by blending PANI nanofibers in polysulfone polymer, resulting in a membrane of better permeability and antifouling ability (121).”
BackgroundMethodCrock, C. A., Rogensues, A. R., Shan, W., & Tarabara, V. V. (2013) · Water Research · doi:10.1016/j.watres.2012.10.057 · Cited by 130
Preparation of supported lipid membranes for aquaporin Z incorporation
Li, X., Wang, R., Tang, C. Y., Vararattanavech, A., Zhao, Y., Torres, J., & Fane, T. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.02.013 · Cited by 127
Nevárez, L. A. M., Ballinas‐Casarrubias, L., Solís-Canto, O., Celzard, A., Fierro, V., Ibarra‐Gómez, R., & González‐Sánchez, G. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.05.014 · Cited by 126
Alpatova, A. L., Meshref, M. N. A., McPhedran, K. N., & El‐Din, M. G. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.05.001 · Cited by 124 · cited 1×
“The presence of interfacial voids creates additional channels that allow for the solvent to pass through the membrane (51, 54, 55).”
BackgroundLi, J., Zhu, J., & Zheng, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25428 · Cited by 123 · cited 1×
“In recent years, these fillers have been incorporated for various purposes such as: to enhance flux (43, 81), to improve selectivity (82), for disinfection (83), to alleviate membrane fouling (84, 85), as well as biofouling (85, 86) in water purification.”
BackgroundAdams, F. V., Nxumalo, E. N., Krause, R. W. M., Hoek, E. M. V., & Mamba, B. B. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.03.023 · Cited by 122 · cited 1×
“blended a β-cyclodextrin polyurethane into polysulfone matrix for removal of Cd ions from water (119).”
BackgroundZhu, J., Zhang, Y., Tian, M., & Liu, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00006 · Cited by 119 · cited 1×
“The presence of interfacial voids creates additional channels that allow for the solvent to pass through the membrane (51, 54, 55).”
BackgroundGang, M., He, G., Li, Z., Cao, K., Li, Z., Yin, Y., Wu, H., & Jiang, Z. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.02.004 · Cited by 118 · cited 1×
“Some of these potential applications reported in literature include blood purification (12, 13), toxins removal from human plasma (14), methanol fuel cell (15), sensors and biosensors (16), and wound dressing (17).”
BackgroundZhao, S. J., Wang, Z., Wei, X., Tian, X., Wang, J., Yang, S., & Wang, S. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.09.029 · Cited by 110 · cited 7×
“also obtained the same results for PANI-based nanocomposite membranes with added polyvinylpyrrolidone (PVP) (129).”
BackgroundResultInfluentialDaraei, P., Madaeni, S. S., Ghaemi, N., Monfared, H. A., & Khadivi, M. A. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.11.004 · Cited by 109
Zhang, L., Shi, G., Qiu, S., Cheng, L., & Chen, H. (2011) · Desalination and Water Treatment · doi:10.5004/dwt.2011.2801 · Cited by 104
PSf/PANI nanocomposite membrane prepared by in situ blending of PSf and PANI/NMP
Zhao, S. J., Wang, Z., Wang, J., Yang, S., & Wang, S. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.04.008 · Cited by 95 · cited 1×
“2 nm) and restricting adsorption on membrane surface due to the PANI hydrophilic nature in contrast to the hydrophobic character of BSA (protein size 8 nm) (128).”
BackgroundTeli, S. B., Molina, S., García‐Calvo, E., Lozano, Á. E., & de Abajo, J. (2012) · Desalination · doi:10.1016/j.desal.2012.05.031 · Cited by 94
Sianipar, M., Kim, S. H., Min, C.-S., Tijing, L. D., & Shon, H. K. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.11.025 · Cited by 94
Lin, C., Gung, C.-H., Sun, J.-J., & Suen, S. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.08.003 · Cited by 82
Review: is interplay between nanomaterial and membrane technology the way forward for desalination?
Goh, P. S., & Ismail, A. F. (2014) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4531 · Cited by 76
Wang, Z., Wang, H., Liu, J., & Zhang, Y. (2014) · Desalination · doi:10.1016/j.desal.2014.03.040 · Cited by 73
Application of membrane processes in drinking water treatment–state of art
Bodzek, M., Konieczny, K., & Kwiecińska, A. (2011) · Desalination and Water Treatment · doi:10.5004/dwt.2011.2435 · Cited by 73 · cited 1×
“Previously, surface water and groundwater were appraised as sufficient freshwater resources, but industrialization has pushed mankind to meet the increasing fresh needs uncovering sea water, brackish water and wastewater as a valuable addition to the existing naturally fresh resources (4).”
BackgroundHighly dispersible polypyrrole nanospheres for advanced nanocomposite ultrafiltration membranes
Liao, Y., Farrell, T. P., Guillen, G. R., Li, M., Temple, J. A. T., Li, X., Hoek, E. M. V., & Kaner, R. B. (2013) · Materials Horizons · doi:10.1039/c3mh00049d · Cited by 67
New Technologies for Water and Wastewater Treatment: A Survey of Recent Patents
Tansel, B. (2008) · Recent Patents on Chemical Engineering · doi:10.2174/2211334710801010017 · Cited by 64
Mixed matrix membranes for efficient adsorption of copper ions from aqueous solutions
Tetala, K. K. R., & Stamatialis, D. F. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.11.022 · Cited by 57
Macrovoids in Hybrid Organic/Inorganic Hollow Fiber Membranes
Husain, S., & Koros, W. J. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801008j · Cited by 52
New Technologies for Water and Wastewater Treatment: A Survey of Recent Patents
Tansel, B. (2010) · Recent Patents on Chemical Engineering · doi:10.2174/1874478810801010017 · Cited by 49 · cited 1×
“Membranes have become the most viable option and alternate to the previous technologies (2, 6).”
BackgroundAdams, F. V., Nxumalo, E. N., Krause, R. W. M., Hoek, E. M. V., & Mamba, B. B. (2013) · Physics and Chemistry of the Earth Parts A/B/C · doi:10.1016/j.pce.2013.11.001 · Cited by 46
Zhao, Q., Liu, C., Liu, J., & Zhang, Y. (2015) · RSC Advances · doi:10.1039/c5ra05062f · Cited by 46 · cited 1×
“, dextran, lysozyme, poly-sodium-4-styrene sulfonate) to achieve specific purposes such as mechanical strength (66), antibacterial property (67, 68), antifouling ability (69–71), high flux and high selectivity (55, 72).”
BackgroundStudy on water transport through a mechanically robust Aquaporin Z biomimetic membrane
Wang, H., Chung, T., & Tong, Y. W. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.05.057 · Cited by 30
Multifunctional Nanomaterial-Enabled Membranes for Water Treatment
Tarabara, V. V. (2009) · Elsevier eBooks · doi:10.1016/b978-0-8155-1578-4.50014-7 · Cited by 25
Liao, Z., Chen, H., Zhu, B.-R., & Li, H. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.03.088 · Cited by 23 · cited 1×
“Because both fillers have shown promising results for applications such as gas separation (104) and especially adsorption (105, 106), their inclusion as a filler for water purification could be of great interest.”
BackgroundMultifunctional Nanomaterial-Enabled Membranes for Water Treatment
Tarabara, V. V. (2014) · Elsevier eBooks · doi:10.1016/b978-1-4557-3116-9.00010-x · Cited by 21
Ahmad, A. L., Abdulkarim, A. A., Ismail, S. B., & Seng, O. B. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0221-9 · Cited by 21
Sharaai, A. H., Mahmood, N. Z., & Sulaiman, A. H. (2010) · NRCT Data Center · doi:10.14456/ea.2010.13 · Cited by 21
Kotte, M. R., Hwang, T., Han, J., & Diallo, M. S. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.09.044 · Cited by 19
Wang, R., Jiang, X. Q., He, A., Xiang, T., & Zhao, C. (2015) · RSC Advances · doi:10.1039/c5ra04638f · Cited by 17
Srivastava, N., Joshi, K. V., Thakur, A. K., Menon, S. K., & Shahi, V. K. (2014) · Desalination · doi:10.1016/j.desal.2014.08.014 · Cited by 15 · cited 3×
“currently prepared anMMMfor recovery of magnesium (Mg) ions from natural waters (57).”
BackgroundMethodInfluential
Cited by
Recent advances in nanomaterials for water protection and monitoring
Das, R., Vecitis, C. D., Schulze, A., Cao, B., Ismail, A. F., Lu, X., Chen, J., & Ramakrishna, S. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00921b · Cited by 552
MXene Materials for Designing Advanced Separation Membranes
Karahan, H. E., Goh, K., Zhang, C. (., Yang, E., Yıldırım, C., Chuah, C. Y., Ahunbay, M. G., Lee, J., Tantekin‐Ersolmaz, Ş. B., Chen, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906697 · Cited by 543
Reverse osmosis membrane fabrication and modification technologies and future trends: A review
Hailemariam, R. H., Woo, Y. C., Damtie, M. M., Kim, B. C., Park, K.-D., & Choi, J.-S. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.102100 · Cited by 309
Polymeric nanocomposite membranes for water treatment: a review
Wen, Y., Yuan, J., Ma, X., Wang, S., & Liu, Y. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00895-9 · Cited by 299
Metadata
- Authors
- Qadir, D., Mukhtar, H., & Keong, L. K.
- Venue
- Separation & Purification Reviews
- Publisher
- Informa UK Limited
- Published
- 2016-06-02
- Volume
- 46
- Issue
- 1
- Pages
- 62-80
- ISSN
- 1542-2119 (ISSN-L)
- 1542-2127
- OpenAlex
- W2460334800
- Cited by
- 195
- References
- 134
- FWCI
- 6.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.