The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
Abstract
Powder-bed fusion is a class of Additive Manufacturing (AM) processes that bond successive layers of powder to facilitate the creation of parts with complex geometries. As AM technology transitions from the fabrication of prototypes to end-use parts, the understanding of the powder properties needed to reliably produce parts of acceptable quality becomes critical. Consequently, this has led to the use of powder characterisation techniques such as scanning electron microscopy, laser light diffraction, X-ray photoelectron spectroscopy, and differential thermal analysis to study the effect of powder characteristics on part properties. Utilisation of these powder characterisation methods to study particle morphology, chemistry, and microstructure has resulted in significant strides being made towards the optimisation of powder properties. This paper reviews methods commonly used in characterising AM powders, and the effects of powder characteristics on the part properties in powder-bed fusion processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Scanning Electron Microscopy and X-Ray Microanalysis
Goldstein, J. I., Newbury, D. E., Michael, J. R., Ritchie, N. W. M., Scott, J. H. J., & Joy, D. C. (2018) · Springer eBooks · doi:10.1007/978-1-4939-6676-9 · Cited by 5,361
Transmission Electron Microscopy
Williams, D. B., & Carter, C. B. (2009) · Springer eBooks · doi:10.1007/978-0-387-76501-3 · Cited by 3,963
Principles of Instrumental Analysis
(2001) · Laboratory Guide for Conducting Soil Tests and Plant Analysis · doi:10.1201/9781420025293.ch5 · Cited by 3,638
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Principles and prevention of corrosion
Walker, R. (1993) · Materials & Design · doi:10.1016/0261-3069(93)90066-5 · Cited by 2,427
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Self-citationInkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Scanning Electron Microscopy and X-ray Microanalysis: Third Edition
Goldstein, J. I., Newbury, D. E., Echlin, P., Joy, D. C., Lyman, C. E., Lifshin, E., Sawyer, L., & Michael, J. R. (2003) · Springer eBooks · doi:10.1007/978-1-4615-0215-9 · Cited by 1,797
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Kong, D., Dong, C., Ni, X., Zhang, L., Yao, J., Man, C., Cheng, X., Xiao, K., & Li, X. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.03.003 · Cited by 471
Metadata
- Authors
- Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W.
- Venue
- Virtual and Physical Prototyping
- Publisher
- Informa UK Limited
- Published
- 2016-12-07
- Volume
- 12
- Issue
- 1
- Pages
- 3-29
- ISSN
- 1745-2759 (ISSN-L)
- 1745-2767
- OpenAlex
- W2560850791
- Cited by
- 354
- References
- 94
- FWCI
- 22.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes. https://app.cochat.ai/papers/10.1080/17452759.2016.1250605
- The paper
- Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017). Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual and Physical Prototyping. https://doi.org/10.1080/17452759.2016.1250605
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.