The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
Abstract
The aim of this study was to compare traditional strut-based lattices with minimal surface designs using morphological analysis and image-based simulations of design files. While the two types have been studied widely, no direct comparison has ever been done. Surprisingly, there are no major differences in performance between the two types generally, but minimal surface designs do outperform slightly on angular load simulation. However, minimal surface designs in this density range are shown to have very thin walls, potentially making their accurate production more challenging, or more suitable for applications where larger pore sizes and sheet thicknesses may be applicable. Interesting results such as dual pore size distributions and variations in tortuosity of pore networks are demonstrated, with differences between various designs. The results show that all the tested designs are suitable for bone implants, but the best design might be selected based on its specialised performance requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Orme, M. E., Gschweitl, M., Ferrari, M., Madera, I., & Mouriaux, F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037304 · Cited by 92
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Self-citationdu Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Self-citationPlocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Self-citation
Metadata
- Authors
- du Plessis, A., Yadroitsava, I., Yadroitsev, I., le Roux, S., & Blaine, D.
- Venue
- Virtual and Physical Prototyping
- Publisher
- Informa UK Limited
- Published
- 2018-06-25
- Volume
- 13
- Issue
- 4
- Pages
- 266-281
- ISSN
- 1745-2759 (ISSN-L)
- 1745-2767
- OpenAlex
- W2809735466
- Cited by
- 160
- References
- 2
- FWCI
- 10.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing. https://app.cochat.ai/papers/10.1080/17452759.2018.1491713
- The paper
- du Plessis, A., Yadroitsava, I., Yadroitsev, I., le Roux, S., & Blaine, D. (2018). Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing. Virtual and Physical Prototyping. https://doi.org/10.1080/17452759.2018.1491713
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.