The effect of pyrolysis temperature and ball-milling duration on characteristics of micro bio-char derived from oil palm empty fruit bunches
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Oil palm empty fruit bunch is a solid waste that accounts for 22% of palm oil production, but its utilization is still limited, so it needs further processing. One alternative for processing oil palm empty fruit bunch waste is using pyrolysis to produce biochar and syngas. The present research worked on producing micro biochar to increase the surface area by making smaller particles. Oil palm empty fruit can be converted into micro biochar with a ball mill. This study aimed to determine the effect of pyrolysis temperature and ball mill duration on the proximate characteristics and particle size distribution of oil palm empty fruit bunch micro-biochar. The research design was arranged using a Randomised Block Design with two factors: pyrolysis temperature (400°C, 500°C, and 600°C) and ball mill time (24 hours, 48 hours, and 72 hours). The micro biochar characterisation includes moisture content, ash content, bound carbon content (bound carbon), volatile matter, calorific value, and particle size distribution. The results showed that pyrolysis temperature and ball mill duration had an insignificant effect on water content. The heating value increased with increasing pyrolysis temperature. The carbon content slightly increased with pyrolysis temperature and ball mill duration. The temperature and duration of the ball milling influenced the particle size distribution. The higher the pyrolysis temperature and the ball mill duration, the smaller the average particle size distribution. The smallest particle size was 3.04 µm, pyrolyzed at 600°C and had a ball milling duration of 72 hours.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It is worth noting that in the literature there is no consensus on the effect of pyrolysis temperature on the biochar pore size; while some authors have reported the pore size of biochar increases with increasing pyrolysis temperature [37], other authors have reported the opposite [38].”
From Production of Biochar from Plantain Rachis and Cassava Peel Towards Sustainable Management of Caribbean Agricultural Waste (2025) · cites this paper as [37]
Citations
Cites
Lignocellulosic biomass-based pyrolysis: A comprehensive review
K N, Y., T, P. D., P, S., S, K., R, Y. K., Varjani, S., AdishKumar, S., Kumar, G., & J, R. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131824 · Cited by 529
Comparison of the pyrolysis behavior of lignins from different tree species
Wang, S., Wang, K., Liu, Q., Gu, Y., Luo, Z., Cen, K., & Fransson, T. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2009.04.010 · Cited by 405 · cited 1×
“In the pyrolysis stage, temperatures exceeding 600 °C caused the release of gases such as carbon monoxide, carbon dioxide, and methane as well as high molecular weight volatiles due to the breakdown of the highly bonded methyl group, CH 2 (S. Wang et al., 2009).”
BackgroundAmusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323 · cited 1×
“The use of ball mills is preferred and effectively utilised (Amusat et al., 2021).”
MethodXiao, J., Hu, R., & Chen, G. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121980 · Cited by 320 · cited 1×
“According to (Xiao et al., 2020) manufacture of micro-biochar uses a milling machine.”
MethodA green method for production of nanobiochar by ball milling- optimization and characterization
Naghdi, M., Taheran, M., Brar, S. K., Rouissi, T., Verma, M., Surampalli, R. Y., & Valero, J. R. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.084 · Cited by 253 · cited 1×
“( Naghdi et al., 2017) said that the manufacture of bio-char using a ball mill with a sonification process could reach a particle size of up to 60 nm with a speed parameter of 575 rpm for 1.6 hours, a ball ratio of 4.5 g/g and a temperature condition of 80°C. Biochar has a higher adsorption…”
MethodInfluentialPrediction of higher heating values of biochar from proximate and ultimate analysis
Qian, C., Li, Q., Zhang, Z., Wang, X., Hu, J., & Cao, W. (2020) · Fuel · doi:10.1016/j.fuel.2019.116925 · Cited by 189 · cited 1×
“The calorific value of biochar can be predicted using a proximate analysis of solid fuels, including moisture (M), volatile matter (VM), ash (Ash), and fixed carbon (FC; Qian et al., 2020).”
BackgroundAn overview of sulfur-functional groups in biochar from pyrolysis of biomass
Leng, L., Liu, R., Xu, S., Mohamed, B. A., Yang, Z., Hu, Y., Chen, J., Zhao, S., Wu, Z., Peng, H., et al. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.107185 · Cited by 185
Yang, C., Liu, J., & Lu, S. (2021) · Geoderma · doi:10.1016/j.geoderma.2021.115097 · Cited by 184 · cited 1×
“…the pore size, resulting in a smoother biochar surface (Torres-Sciancalepore, Asensio et al., 2022), At high-temperature heating, the biochar pores will open and cause the pore diameter to increase so that complex compounds, especially those inside the pores, are released (Yang et al., 2021).”
BackgroundEffect of pyrolysis temperature on product yields of palm fibre and its biochar characteristics
Selvarajoo, A., & Oochit, D. (2020) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2020.06.003 · Cited by 119 · cited 2×
“The ash content of raw palm fibre is relatively low, around 2–3% (Selvarajoo & Oochit, 2020).”
BackgroundTorres-Sciancalepore, R., Fernandez, A., Asensio, D., Riveros-Gomez, M., Fabani, M. P., Fouga, G. G., Rodríguez, R., & Mazza, G. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.115076 · Cited by 93 · cited 1×
“Pyrolysis is a thermal decomposition method used to extract liquid smoke from biomaterials, such as agro-industrial bio-wastes (Fernandez et al., 2022), quince waste (Torres-Sciancalepore, Fernandez et al., 2022), and rosehip seed waste (Torres-Sciancalepore, Asensio et al., 2022).”
Method
Cited by
The potential of biochar-slurry fuel from agricultural wastes in Indonesia
Setyawan, H. Y., Sunyoto, N. M. S., Choirun, A., Musyaroh, M., & Arwani, M. (2024) · Cogent Engineering · doi:10.1080/23311916.2024.2307201 · Cited by 16
“The biochar size reduction is affected by pyrolysis temperature and the milling process (Setyawan et al., 2023).”
Self-citationEffect of Pyrolysis Temperature on the Production of Biochar and Biomethanol from Sugarcane Bagasse
Souza, P. G. A., Carvalho, J. D. C. L., de Souza, L. Z. M., Lima, E. N., de Aguilar, M. G., de Lima, R. P., Ferreira, O. E., Pimenta, L. P. S., & Machado, A. R. T. (2024) · BioEnergy Research · doi:10.1007/s12155-024-10733-8 · Cited by 10
Herazo, A. P., Zambrano, A., Marín, L., Mass, J., & Montenegro, D. N. (2025) · Processes · doi:10.3390/pr13072059 · Cited by 4
Properties and combustion characteristics of bioslurry fuels from agricultural waste pyrolysis
Setyawan, H. Y., & Zhu, M. (2024) · International Journal of Sustainable Energy · doi:10.1080/14786451.2024.2384873 · Cited by 4
“More porous biochar is produced when pyrolysis temperatures are higher (Setyawan et al. 2023).”
Self-citationSuhartini, S., Pratama, A. S. P., Rohma, N. A., Elviliana, E., Setyawan, H. Y., Sunyoto, N. M. S., Suprayogi, Fatrıasarı, W., Jung, Y. H., Idrus, S., et al. (2026) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2026.100866 · Cited by 4
Self-citation
Metadata
- Authors
- Setyawan, H. Y., Safira, L., Mulyarto, A. R., Wijana, S., & Pranowo, D.
- Affiliations
- University of Brawijaya (ID)
- Corresponding author
- Setyawan, Hendrix Yulis
- Venue
- Sustainable Environment
- Publisher
- Informa UK Limited
- Published
- 2023-02
- Volume
- 9
- Issue
- 1
- ISSN
- 2765-8511 (ISSN-L)
- OpenAlex
- W4319040594
- Cited by
- 8
- References
- 24
- Citations by year
- 2026: 4 · 2025: 1 · 2024: 3
- FWCI
- 0.63
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- Locations
- Sustainable Environment (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
- Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
- Keywords
- biochar, empty fruit bunch, pyrolysis temperature, ball milling, particle size distribution, proximate analysis, calorific value, bound carbon, agricultural waste valorization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of pyrolysis temperature and ball-milling duration on characteristics of micro bio-char derived from oil palm empty fruit bunches. https://app.cochat.ai/papers/10.1080/27658511.2023.2173041
- The paper
- Setyawan, H. Y., Safira, L., Mulyarto, A. R., Wijana, S., & Pranowo, D. (2023). The effect of pyrolysis temperature and ball-milling duration on characteristics of micro bio-char derived from oil palm empty fruit bunches. Sustainable Environment. https://doi.org/10.1080/27658511.2023.2173041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.