Effect of pyrolysis temperature on product yields of palm fibre and its biochar characteristics
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Rapid population and economic growth causes the demand for energy is increasing every year. A lot of focus has been put on renewable energy as the fossil fuel reserve is expected to last only a few decades. Biomass is recognised as a potential source of renewable energy but however, it usually requires further processing before it can be used. In the present study, biochar was prepared via pyrolysis using palm fibre as the biomass feedstock. This paper provides experimental data for the production of biochar at a temperature range of 300 to 900 °C at a heating rate of 5 °C/min. The obtained biochar was characterised using bomb calorimeter, Micromeritics ASAP 2020 Physisorption BET and scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX). The biochar gasification behaviour was studied in a Thermogravimetric Analyzer at temperatures ranging from 600 to 1000 °C. From the pyrolysis experiments, it was found that a good char yield can be obtained at lower pyrolysis temperatures. For the gasification experiment, a temperature of 800 °C and above is required for gasification to take place. Energy consumption can be reduced significantly for future research when employ this operating condition. Properties of solid fuel like char reactivity and carbon conversion under well defined gasifying agent and temperature is necessary for designing any gasifier model. It can be concluded that palm fibre can be upgraded into solid biofuel and has potential to be used as a feedstock for renewable energy production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pignatello, J. J., Oliveros, E., & MacKay, A. (2006) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380500326564 · Cited by 4,133
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Zhang, J., Liu, J., & Liu, R. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.011 · Cited by 560
Selvarajoo, A., Muhammad, D., & Arumugasamy, S. K. (2020) · Modeling Earth Systems and Environment · doi:10.1007/s40808-019-00663-2 · Cited by 54
Self-citation
Cited by
Rambhatla, N., Panicker, T. F., Mishra, R. K., Manjeshwar, S. K., & Sharma, A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2024.103679 · Cited by 133
Lackner, M., Fei, Q., Guo, S., Yang, N., Guan, X., & Hu, P. (2024) · Fuels · doi:10.3390/fuels5040034 · Cited by 31
Setyawan, H. Y., Safira, L., Mulyarto, A. R., Wijana, S., & Pranowo, D. (2023) · Sustainable Environment · doi:10.1080/27658511.2023.2173041 · Cited by 8
“The ash content of raw palm fibre is relatively low, around 2–3% (Selvarajoo & Oochit, 2020).”
Background
Metadata
- Authors
- Selvarajoo, A., & Oochit, D.
- Venue
- Materials Science for Energy Technologies
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 3
- Pages
- 575-583
- ISSN
- 2589-2991 (ISSN-L)
- OpenAlex
- W3036677709
- Cited by
- 119
- References
- 4
- FWCI
- 3.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of pyrolysis temperature on product yields of palm fibre and its biochar characteristics. https://app.cochat.ai/papers/10.1016/j.mset.2020.06.003
- The paper
- Selvarajoo, A., & Oochit, D. (2020). Effect of pyrolysis temperature on product yields of palm fibre and its biochar characteristics. Materials Science for Energy Technologies. https://doi.org/10.1016/j.mset.2020.06.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.