Study on the thiophosphinic extractants. i. the basic properties of the extractants and the phase behavior in their saponified systems
The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Commercial extractants Cyanex 302 and Cyanex 301 have been purified, and their sodium salts prepared. The basic physic-chemical parameters, such as solubility and pKa values in water of the acids, cmc of the salts, have been reported. The phase behaviors during saponification of purified extractants by NaOH have been measured. The system of monothiophosphinic extractant is similar to that of purified Cyanex 272 except when the middle phase of the former appears at lower neutralization fraction and the volume of the third phase is bigger. But there is no third phase formed in dithiophosphinic acid extractant system and it always maintains the equilibrium of bottom phase microemulsion with the excessive oil phase (Winsor type I). The pseudo-ternary phase diagrams of unpurified Cyanex 302 (or Cyanex 301)-n-C6H14-NaOH (2.4 mol/L) are compared with Cyanex 272 system. There are some differences in all of 3L, 2L, L and D regions. The pseudo-ternary phase diagrams of purified sodium salt NaA-n-C5H11OH-kerosene (80%, w/w)-H2O system for different extractants have also been drawn. The mono-phase microemulsion (w/o) area increases with the increasing of sulfur atom in extractants, indicating that the replacement of oxygen atom by sulfur makes sodium salt more hydrophilic.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cyanex 301 (the main constituent is bis(2,4,4-trimethylpentyl) dithiophosphinic acid) is suitable for extracting zinc and other heavy metals, including platinum group metals [2,5,6].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [5]
In the citing paper
“Since the acidity of Cyanex 301 and Cyanex 302 is stronger than that of Cyanex 272, they can extract metal ions at a lower pH.”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [5]
In the citing paper
“The replacement of oxygen atoms in di (2,4,4-trimethylpentyl) phosphinic acid by sulfur atoms leads to a change in their physicochemical properties and chemical characteristics [5].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [5]
In the citing paper
“The replacement of oxygen atoms in di (2,4,4-trimethylpentyl) phosphinic acid with sulfur atoms causes an increase in the water solubility and acidity of the resulting products.”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [5]
Citations
Cites
Extraction of Am(III) and Eu(III) from Nitrate Solution with Purified Cyanex 301
Zhu, Y., Chen, J., & Jiao, R. (1996) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299608918326 · Cited by 267
The selective recovery of zinc with new thiophosphinic acids
RICKELTON, W. A., & BOYLE, R. J. (1990) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299008918030 · Cited by 118 · cited 1×
“For example, their acidic ionization constants in water increased and the values of equilibrium pH in metal ion extraction process became lower.([14]) Recently, the extractions of many metals with them have been investigated.”
BackgroundPURIFICATION OF ORGANOPHOSPHORUS ACID EXTRACTANTS
Hu, Z., Ying, P., Wanwu, M., & Xun, F. (1995) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299508918312 · Cited by 91
Self-citationSOLVENT EXTRACTION OF SILVER BY CYANEX 272, CYANEX 302 AND CYANEX 30
Sole, K. C., Ferguson, T. L., & Hiskey, J. B. (1994) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299408918252 · Cited by 70
Fu, X., Hu, Z., Liu, Y., & Golding, J. A. (1990) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299008918018 · Cited by 33 · cited 2×
“58610 5 mol=L for the solubility of HA272 obtained by the same technique,([27]) the sequence of HA272<HA302<HA301 was known.”
BackgroundMethodHu, Z., Xiaopeng, H., Cui, W., Debao, W., & Xun, F. (1999) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(99)00033-3 · Cited by 22 · cited 1×
“Our team has studied the formation, microstructure and application of the third phase in extraction systems, reported the phase behavior and extraction mechanism of ammonium extractant salt (such as trioctylamine – HCl system)([8,9]) and neutral extractant system([10,11]) (such as tributylphosphate), proposed that org…”
Self-citationThree phase extraction study. I. Tri-butyl phosphate-kerosene/H2SO4–H2O extraction system
Fu, X., Xiaopeng, H., Zuhua, Z., Hu, Z., & Debao, W. (1999) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00869-3 · Cited by 19 · cited 1×
“Our team has studied the formation, microstructure and application of the third phase in extraction systems, reported the phase behavior and extraction mechanism of ammonium extractant salt (such as trioctylamine – HCl system)([8,9]) and neutral extractant system([10,11]) (such as tributylphosphate), proposed that org…”
THREE-PHASE EXTRACTION STUDY OF THE TOA-ALKANE / HC1 (Zn2+or Fe3∗) SYSTEMS 1
Xun, F., Huan, L., Chen, H., Hu, Z., & Debao, W. (1999) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299908934648 · Cited by 15 · cited 1×
“Our team has studied the formation, microstructure and application of the third phase in extraction systems, reported the phase behavior and extraction mechanism of ammonium extractant salt (such as trioctylamine – HCl system)([8,9]) and neutral extractant system([10,11]) (such as tributylphosphate), proposed that org…”
Self-citationPurification and Properties of Cyanex 301
Chen, J., Jiao, R., & Zhu, Y. (1996) · Chinese Journal of Applied Chemistry · doi:10.3724/j.issn.1000-0518.1996.2.4548 · Cited by 12
Guohua, G., Yueshun, W., Xun, F., Xiaopeng, H., Weirong, Y., & Yahong, X. (2000) · Solvent Extraction and Ion Exchange · doi:10.1080/07366290008934710 · Cited by 9 · cited 1×
“[4] Our team has studied the formation, microstructure and application of the third phase in extraction systems, 5-7 reported the phase behavior and extraction mechanism of ammonium extractant salt (such as trioctylamine – HCl system) 8-9 and neutral extractant system 10-11 (such as tributylphosphate), proposed that o…”
MethodSelf-citation
Research works printed but not linked: 15
- Wu, J., Shi, N., Zhou, W., Liao, H., Gao, H. and Xu, G. In Extraction and Interface Chemistry, Symp. 2nd Conf. of China. Nov.7.1991; Shanghai.
- Wu, J., Kao, H. and Chen, T. Microemulsion Formation in the Organic Phase of Some Important Extractions and Its Effects on the Extraction Mechanism. ISEC’. Liege, Belgium. pp.80–234. Liege, Belgium
- Wu J., 1982, NMR Study on Saponified Cyclo-alkane Acid – Long-chain Alcohol-Kerosene-Water System During Ion Hydration. Science Sin. B, 9, 793
- Wang D., 1995, Mechanism Study on Extractant Loss – I Saponified Acidic Organo-phosphoric Ester Extractants Transfer from the Organic Phase and their Aggregation in Aqueous Phase. Science Sin. B, 5, 449
- Fu X., 2000, Progress in the Study of Three-phase Extraction System – The Formation, Microstructure and Application of the Third Phase. Chemical Journal on Internet, 3, 18
- Fu X., 1995, Study on the Sodium Salts of Organic-phosphoric Acid Extractants and their Micro-emulsions by NMR and FTIR Spectroscopy. Acta Chim. Sin., 53, 178
- Fu, X., Liu, H., Xue, M., Hu, Z. and Wang, D. 2000.Self-assembly in TOA ċHCl-heptane-H2O System.Vol. 11, 27 ppBeijing, New York: Science Press:
- Fu X., 1999, Three-phase Extraction Study of the TOA-alkane/HCl (Zn2+or Fe3+) System., 17, 1281
- Sole K. C., 1992, The Potential for Recovery of Cobalt from Copper Leach Solution. Hydrometallurgy, 30, 345
- Tait B. K., 1992, The Extraction of Some Base Metal Ions by Cyanex301, Cyanex302 and their Binary Extractant Mixtures with Aliquat336., 10, 799
- Li D., 1996, Solvent Extraction of Trivalent Lanthanides with Cyanex302 from Acidic Aqueous Chloride Solution., 14, 165
- Shen J., 1984, Purification of P507. Nonmetals, 5, 56
- Fu X., 1993, Thermodynamic Function of Micro- Emulsions in Sodium Salt of Dialkylphosphoric Acid Extractant Systems. Acta Chim. Sin., 51, 1151
- Geng P., 1982, Determination of Some Basic Constants of HDEHP and the Equilibrium Constants for Its Extraction of Trivalent Light-rare Earth Ions., 5, 59
- Zhu B., 1981, The Measurement of Surfacial and Interfacial Tension of Liquids – an introduction to the Drop-Volume Method. HuaXue TongBao(Chinese), 69, 21
Cited by
Nguyen, V. N. H., Nguyen, T. H., & Lee, M. S. (2020) · Metals · doi:10.3390/met10081105 · Cited by 55
“The replacement of oxygen atoms in di (2,4,4-trimethylpentyl) phosphinic acid by sulfur atoms leads to a change in their physicochemical properties and chemical characteristics [5].”
BackgroundSeparation of copper from aqueous sulfate solutions by mixtures of Cyanex 301 and LIX® 984N
Fouad, E. A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.11.114 · Cited by 47
One-Step Separation of Platinum, Palladium, and Rhodium: A Three-Liquid-Phase Extraction Approach
Yu, P., Huang, K., Zhang, C., Xie, K., He, X., & Liu, H. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200883u · Cited by 35
Sole, K. C. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-95022-8_95 · Cited by 44
“Although the dithio analogue of D2EHPA was tested at a laboratory scale, stripping of the reagent proved too difficult and its stabilty was problematic [42, 43].”
BackgroundTercero, N., Nagaraj, D. R., & Farinato, R. S. (2019) · Mining Metallurgy & Exploration · doi:10.1007/s42461-018-0039-1 · Cited by 27
Determination of pKa for dithiophosphinic acids using density functional theory
Benson, M. T., Moser, M. L., Peterman, D. R., & Dinescu, A. (2008) · Journal of Molecular Structure THEOCHEM · doi:10.1016/j.theochem.2008.07.020 · Cited by 23
Shi, H., Fu, X., Zhou, X., Wang, D., & Hu, Z. (2006) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2006.02.030 · Cited by 23
Leavitt, C. M., Gresham, G. L., Benson, M. T., Gaumet, J., Peterman, D. R., Klaehn, J. R., Moser, M. L., Aubriet, F., Stipdonk, M. J. V., & Groenewold, G. S. (2008) · Inorganic Chemistry · doi:10.1021/ic7020897 · Cited by 20
Palladium Recovery by Reactive Precipitation using a Cyanex 301‐Based Stable Emulsion
Vincent, T., Guibal, E., & Chiarizia, R. (2007) · Separation Science and Technology · doi:10.1080/01496390701626735 · Cited by 20
“84) (45) is undissociated and the metal is extracted through interaction with the thiophosphoryl group (P 1⁄4 S).”
BackgroundPreparation of CdS nanowires and Bi2S3 nanorods by extraction–solvothermal method
Huaqiang, S., Zhou, X., Fu, X., Debao, W., & Hu, Z. (2006) · Materials Letters · doi:10.1016/j.matlet.2005.12.024 · Cited by 19
Shi, H., Fu, X., Zhou, X., & Hu, Z. (2006) · Journal of Materials Chemistry · doi:10.1039/b516917h · Cited by 18
Xun, F., Yu, W. W., Yusheng, L., Debao, W., Huaqiang, S., & Fengyuan, Y. (2005) · Journal of Dispersion Science and Technology · doi:10.1081/dis-200057640 · Cited by 18
Self-citationOmelchuk, K., Stambouli, M., & Chagnes, A. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.04.082 · Cited by 16
Shan, X., Qin, W., Zhou, Z., & Youyuan, D. (2008) · Journal of Chemical & Engineering Data · doi:10.1021/je7002034 · Cited by 16
Preparation of CdS hollow spheres using poly-(styrene–acrylic acid) latex particles as template
Fu, X., Lin, L., Wang, D., Hu, Z., & Song, C. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.04.037 · Cited by 16
Liu, Y., & Lee, M. S. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.03.055 · Cited by 16
Formation of W/O Microemulsions in the Extraction of the Lanthanide Series by Purified Cyanex 301
Sun, T., Xu, C., Chen, J., & Duan, W. (2017) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2017.1326729 · Cited by 15
“97 × 10 mol/L.([25]) We detected the formation of aggregates in some of the aqueous phases in the extraction of Ln(III) at 50% neutralization degree with a size distribution from 70 to 500 nm (Fig.”
BackgroundGroenewold, G. S., Peterman, D. R., Klaehn, J. R., Delmau, L. H., Marc, P., & Custelcean, R. (2012) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.6339 · Cited by 14
Preparation of Organic Fluid Containing Ag Nanoparticles with Extractant Cyanex 301
Shi, H., Fu, X., Zhou, X., & Hu, Z. (2005) · Journal of Dispersion Science and Technology · doi:10.1081/dis-200049591 · Cited by 13
Elemental Phosphorus in the Synthesis of Organophosphorus Compounds: The Recent Advances (A Review)
Malysheva, S. F., Kuimov, V. A., & Arbuzova, S. N. (2023) · Russian Journal of General Chemistry · doi:10.1134/s1070363223140293 · Cited by 10
Tribological properties of Cyanex 301‐modified MoS2 nano‐sized hollow spheres in liquid paraffin
Zhou, X., Shi, H., Fu, X., Wu, D., & Hu, Z. (2008) · Industrial Lubrication and Tribology · doi:10.1108/00368790810871075 · Cited by 9
Fu, X., Yahong, X., Qingli, W., Shuyun, X., Shaona, Z., & Hu, Z. (2002) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00283-2 · Cited by 9
Self-citationHuang, T., Wang, Y., Hu, H., Hu, F., Luo, Y., & Liu, S. (2019) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(19)65019-3 · Cited by 7
Bishimbayeva, G. K., Gusarova, N. K., Nalibayeva, A. M., Verkhoturova, S. I., Bold, A., Chernysheva, N. A., Zhanabaeva, A. K., Arbuzova, S. N., Abdikalykov, Y. N., & Zhumabayeva, D. (2023) · Materials · doi:10.3390/ma16093394 · Cited by 7
Shi, H., Zhou, X., Fu, X., Gao, F., & Hu, Z. (2007) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.11.045 · Cited by 7
Zalupski, P. R., Chiarizia, R., Jensen, M. P., & Herlinger, A. W. (2006) · Solvent Extraction and Ion Exchange · doi:10.1080/07366290600646988 · Cited by 5
“25–28 Although the measured pK a values for H 2 DEH[MBTP] are slightly higher than expected, its acid strength in the mixed aqueous alcohol solvent is virtually identical to that of its oxygen analogues.”
BackgroundChemical Reactivity of Tributyl Phosphate with Selected Solvent Extraction Reagents
Barnard, K. R., Shiers, D. W., & Kelly, N. J. (2012) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2012.700582 · Cited by 4
Synthesis of CdS nanocrystals templating against liquid crystal formed by acidic extractants
Fu, X., Chen, L., Wang, J., Lin, Y., Shi, H., & Hu, Z. (2004) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2003.11.017 · Cited by 4
Shi, H., Zhou, X., Zhang, S., & Fu, X. (2009) · Journal of Dispersion Science and Technology · doi:10.1080/01932690802548544 · Cited by 2
Study on the Extraction ofL‐Phenylalanine with Organo‐phosphoric Acid in Two and Three‐phase System
Zhang, L., Fu, X., Hu, Z., Li, Q., & Xu, T. (2002) · Chinese Journal of Chemistry · doi:10.1002/cjoc.20020201208 · Cited by 2
Sequential Purification of Manganese-Rich Leachate from Laterite Nickel Processing Residue
Tayip, D. K., Xu, K., Yang, J., Wan, W., Wardani, A. K., & Chen, Y. (2026) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-026-01511-1 · Cited by 2
“Second, the increased concentration of OH − may cause nucleophilic degradation of the organic extractant, breaking down the molecular structure and leading to the formation of surfactant-like species [47, 56].”
Synthesis of Sulfides Nanomaterials at Aqueous-Organic Interfaces
Shi, H., Zhou, X., Lin, Y., Liu, H., & Fu, X. (2009) · Journal of Dispersion Science and Technology · doi:10.1080/01932690802498187
Kuzmin, V. I., Leskiv, M. N., Peterson, I. V., Kuzmin, D. V., Gudkova, N. V., & Булавченко, А. И. (2021) · Colloid Journal · doi:10.1134/s1061933x21010075
Metadata
- Authors
- Xun, F., Yahong, X., Shuyun, X., Shaona, Z., & Zhengshui, H.
- Affiliations
- Qingdao University (CN)
- Corresponding author
- Xun, Fu
- Venue
- Solvent Extraction and Ion Exchange
- Publisher
- Informa UK Limited
- Published
- 2002-06-27
- Volume
- 20
- Issue
- 3
- Pages
- 331-344
- ISSN
- 0736-6299 (ISSN-L)
- 1532-2262
- OpenAlex
- W1965977286
- Cited by
- 33
- References
- 11
- Citations by year
- 2026: 1 · 2023: 2 · 2021: 1 · 2020: 1 · 2019: 2 · 2018: 2 · 2017: 1 · 2016: 1 · 2012: 2
- FWCI
- 1.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Solvent Extraction and Ion Exchange (publishedVersion)
- Topics
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Keywords
- Cyanex 302, Cyanex 301, Cyanex 272, saponification, phase behavior, pseudo-ternary phase diagram, microemulsions, sodium salts, pKa, critical micelle concentration, hydrophilicity, sulfur substitution, n-hexane, 1-pentanol, kerosene
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.