The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors
Open accessAbstract
High temperature superconducting (HTS) materials have the potential to generate a magnetic field beyond the level obtainable with low temperature superconducting (LTS) materials. This review reports on past and present R&D on HTS cables and conductors for high field tokamaks, accelerator dipoles, and large solenoids. Among the HTS wires and tapes available commercially, coated conductor tapes are the most appealing because of their outstanding critical strength and future improvement margin. Limitations are the weakness against peeling and delamination and the short piece length. The prices of technical superconductors are reviewed because they play an important role in large projects; moreover HTS wires and tapes are discussed from the perspective of industrial production considering the historical development of the LTS wire market. Various designs have been proposed for HTS cables and conductors: some are better suited for soft materials, while others can exploit the anisotropy of coated conductors (by aligning the tape with the field), thus providing the highest current density. Recently, there has been an increase in the size and complexity of the prototypes; however some peculiar features of HTS, such as high stability margins and high mechanical limits, have not yet been fully incorporated into the designs: for example the transposition requirements for HTS have not yet been studied in detail. There are elements indicating that rectangular wires and tapes (even if anisotropic) can be used for manufacturing cables and magnets of any size and have advantages with respect to round wires.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New High-Tc Oxide Superconductor without a Rare Earth Element
Maeda, H., Tanaka, Y., Fukutomi, M., & Asano, T. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.l209 · Cited by 3,632
(2018) · The Wonders of Physics · doi:10.1142/9789813273177_0032 · Cited by 1,685
(1982) · Nature · doi:10.1038/299664a0 · Cited by 1,139
HTS Pancake Coils Without Turn-to-Turn Insulation
Hahn, S., Park, D. K., Bascunan, J., & Iwasa, Y. (2011) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2010.2093492 · Cited by 760
Senatore, C., Alessandrini, M., Lucarelli, A., Tediosi, R., Uglietti, D., & Iwasa, Y. (2014) · Superconductor Science and Technology · doi:10.1088/0953-2048/27/10/103001 · Cited by 286
Self-citationProgress in the Development and Construction of a 32-T Superconducting Magnet
Weijers, H. W., Hannahs, S. T., Murphy, T., Markiewicz, W. D., Gavrilin, A. V., Voran, A. J., Viouchkov, Y. L., Gundlach, S. R., Noyes, P. D., Abraimov, D. V., et al. (2016) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2016.2517022 · Cited by 244
Design of a Superconducting 32 T Magnet With REBCO High Field Coils
Markiewicz, W. D., Larbalestier, D. C., Weijers, H. W., Voran, A. J., Pickard, K. W., Sheppard, W. R., Jaroszynski, J., Xu, A., Walsh, R. P., Lu, J., et al. (2012) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2011.2174952 · Cited by 211
Celentano, G., De Marzi, G., Fabbri, F., Muzzi, L., Tomassetti, G., Anemona, A., Chiarelli, S., Seri, M., Bragagni, A., & della Corte, A. (2014) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2013.2287910 · Cited by 187
Field and temperature scaling of the critical current density in commercial REBCO coated conductors
Senatore, C., Barth, C., Bonura, M., Kulich, M., & Mondonico, G. (2016) · Superconductor Science and Technology · doi:10.1088/0953-2048/29/1/014002 · Cited by 171
Compact fusion energy based on the spherical tokamak
Sykes, A., Costley, A. E., Windsor, C. G., Asunta, O., Brittles, G., Buxton, P., Chuyanov, V., Connor, J. W., Gryaznevich, M. P., Huang, B., et al. (2018) · Nuclear Fusion · doi:10.1088/1741-4326/aa8c8d · Cited by 169
Cited by
VIPER: an industrially scalable high-current high-temperature superconductor cable
Hartwig, Z. S., Vieira, R. F., Sorbom, B. N., Badcock, R. A., Bajko, M., Beck, W. K., Castaldo, B., Craighill, C. L., Davies, M., Estrada, J., et al. (2020) · Superconductor Science and Technology · doi:10.1088/1361-6668/abb8c0 · Cited by 268
Metadata
- Authors
- Uglietti, D.
- Venue
- Superconductor Science and Technology
- Publisher
- IOP Publishing
- Published
- 2019-04-09
- Volume
- 32
- Issue
- 5
- Pages
- 053001
- ISSN
- 0953-2048 (ISSN-L)
- 1361-6668
- OpenAlex
- W2938546415
- Cited by
- 310
- References
- 29
- FWCI
- 8.38
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors. https://app.cochat.ai/papers/10.1088/1361-6668/ab06a2
- The paper
- Uglietti, D. (2019). A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors. Superconductor Science and Technology. https://doi.org/10.1088/1361-6668/ab06a2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.