The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
A new multi-position calibration method for MEMS inertial navigation systems
Abstract
The Global Positioning System (GPS) is a worldwide navigation system that requires a clear line of sight to the orbiting satellites. For land vehicle navigation, a clear line of sight cannot be maintained all the time as the vehicle can travel through tunnels, under bridges, forest canopies or within urban canyons. In such situations, the augmentation of GPS with other systems is necessary for continuous navigation. Inertial sensors can determine the motion of a body with respect to an inertial frame of reference. Traditionally, inertial systems are bulky, expensive and controlled by government regulations. Micro-electro mechanical systems (MEMS) inertial sensors are compact, small, inexpensive and most importantly, not controlled by governmental agencies due to their large error characteristics. Consequently, these sensors are the perfect candidate for integrated civilian navigation applications with GPS. However, these sensors need to be calibrated to remove the major part of the deterministic sensor errors before they can be used to accurately and reliably bridge GPS signal gaps. A new multi-position calibration method was designed for MEMS of high to medium quality. The method does not require special aligned mounting and has been adapted to compensate for the primary sensor errors, including the important scale factor and non-orthogonality errors of the gyroscopes. A turntable was used to provide a strong rotation rate signal as reference for the estimation of these errors. Two different quality MEMS IMUs were tested in the study. The calibration results were first compared directly to those from traditional calibration methods, e.g. six-position and rate test. Then the calibrated parameters were applied in three datasets of GPS/INS field tests to evaluate their accuracy indirectly by comparing the position drifts during short-term GPS signal outages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strapdown Inertial Navigation Technology
Titterton, D., & Weston, J. (2004) · Institution of Engineering and Technology eBooks · doi:10.1049/pbra017e · Cited by 3,348
Global Positioning Systems, Inertial Navigation, and Integration
Grewal, M. S., Weill, L. R., & Andrews, A. P. (2006) · Wiley eBooks · doi:10.1002/0470099720 · Cited by 1,596
Global Positioning Systems, Inertial Navigation, and Integration
Grewal, M. S., Weill, L. R., & Andrews, A. P. (2000) · Wiley eBooks · doi:10.1002/0471200719 · Cited by 490
Fundamentals Of High Accuracy Inertial Navigation
Chatfield, A. B. (1997) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.866463 · Cited by 427
Cited by
Camomilla, V., Bergamini, E., Fantozzi, S., & Vannozzi, G. (2018) · Sensors · doi:10.3390/s18030873 · Cited by 591
In-Car Positioning and Navigation Technologies—A Survey
Skog, I., & Handel, P. (2009) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2008.2011712 · Cited by 582
A robust and easy to implement method for IMU calibration without external equipments
Tedaldi, D., Pretto, A., & Menegatti, E. (2014) · 2014 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2014.6907297 · Cited by 252
Analyses of Triaxial Accelerometer Calibration Algorithms
Sipos, M., Paces, P., Rohac, J., & Novacek, P. (2012) · IEEE Sensors Journal · doi:10.1109/jsen.2011.2167319 · Cited by 145
Metadata
- Authors
- Syed, Z. F., Aggarwal, P., Goodall, C., Niu, X., & El-Sheimy, N.
- Venue
- Measurement Science and Technology
- Publisher
- IOP Publishing
- Published
- 2007-05-15
- Volume
- 18
- Issue
- 7
- Pages
- 1897-1907
- ISSN
- 0957-0233 (ISSN-L)
- 1361-6501
- OpenAlex
- W2035179658
- Cited by
- 386
- References
- 4
- FWCI
- 17.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new multi-position calibration method for MEMS inertial navigation systems. https://app.cochat.ai/papers/10.1088/0957-0233/18/7/016
- The paper
- Syed, Z. F., Aggarwal, P., Goodall, C., Niu, X., & El-Sheimy, N. (2007). A new multi-position calibration method for MEMS inertial navigation systems. Measurement Science and Technology. https://doi.org/10.1088/0957-0233/18/7/016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.