The DOI matches its Crossref record.
Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS
Open accessAbstract
In this paper, SU-8 EPON-based photoresist (PR) polymerization optimization and its possible microfluidic and MEMS applications are reported. First, the optimization results of SU-8 under UV lithography are reported. The parameters which could have an influence on the lithography quality were chosen and optimized by a three-level, L9 orthogonal array of the Taguchi method. By optimization, the optimal parameter range and the weighted per cent of a parameter on the final results were determined. For SU-8-5 and SU-8-50, many microstructures with thicknesses of more than 100 and 500 µm and aspect ratios of more than 20 and 50 were obtained with high resolution. The optimization results show that the prebake time plays the key role in the quality, which is different from the previously published results. With the optimization results obtained, some possible applications of SU-8 were developed and demonstrated. These applications included using SU-8 as a structural material for a microfluidic system, as a micromold for electroplating, as a master for plastic hot-embossing, and even as a mask for some wet-etching processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist
Lin, C.-H., Lee, G.-B., Chang, B.-W., & Chang, G.-L. (2002) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/12/5/312 · Cited by 306
Wu, C., Corrigan, N., Lim, C.-H., Liu, W., Miyake, G., & Boyer, C. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00409 · Cited by 259
A new SU-8 process to integrate buried waveguides and sealed microchannels for a Lab-on-a-Chip
Ruano-López, J. M., Aguirregabiria, M., Tijero, M., Arroyo, M. T., Elizalde, J., Berganzo, J., Aranburu, I., Blanco, F. J., & Mayora, K. (2006) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2005.05.011 · Cited by 85
SU‐8 2000 rendered cytocompatible for neuronal bioMEMS applications
Vernekar, V. N., Cullen, D. K., Fogleman, N., Choi, Y., García, A. J., Allen, M. G., Brewer, G. J., & LaPlaca, M. C. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31839 · Cited by 57
Metadata
- Authors
- Zhang, J., Tan, K. L., Hong, G. D., Yang, L. J., & Gong, H. Q.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2000-11-30
- Volume
- 11
- Issue
- 1
- Pages
- 20-26
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2042232015
- Cited by
- 227
- References
- 0
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS. https://app.cochat.ai/papers/10.1088/0960-1317/11/1/304
- The paper
- Zhang, J., Tan, K. L., Hong, G. D., Yang, L. J., & Gong, H. Q. (2001). Polymerization optimization of SU-8 photoresist and its applications in microfluidic systems and MEMS. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/11/1/304
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.