The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist
Open accessAbstract
In this paper we describe a new process for fabricating ultra-thick microfluidic devices utilizing SU-8 50 negative photoresist (PR) by standard UV lithography. Instead of using a conventional spin coater, a simple 'constant-volume-injection' method is used to create a thick SU-8 PR film up to 1.5 mm with a single coating. The SU-8 PR is self-planarized during the modified soft-baking process and forms a highly-uniform surface without any edge bead effect, which commonly occurs while using a spin coater. Photomasks can be in close contact with the PR and a better lithographic image can be generated. Experimental data show that the average thickness is 494.32 ± 17.13 μm for a 500 μm thick film ( n = 7) and the uniformity is less than 3.1% over a 10 × 10 cm 2 area. In this study, the temperatures for the soft-baking process and post-exposure baking are 120 °C and 60 °C, respectively. These proved to be capable of reducing the processing time and of obtaining a better pattern definition of the SU-8 structures. We also report on an innovative photomask design for fabricating ultra-deep trenches, which prevents the structures from cracking and distorting during developing and hard-baking processes. In this paper, two microfluidic structures have been demonstrated using the developed novel methods, including a micronozzle for thruster applications and a microfluidic device with micropost arrays for bioanalytical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS
Lorenz, H., Despont, M., Fahrni, N., Brugger, J., Vettiger, P., & Renaud, P. (1998) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(98)80055-1 · Cited by 573
Negative photoresists for optical lithography
Shaw, J. M., Gelorme, J. D., LaBianca, N. C., Conley, W. E., & Holmes, S. J. (1997) · IBM Journal of Research and Development · doi:10.1147/rd.411.0081 · Cited by 345
Zhang, J., Tan, K. L., Hong, G. D., Yang, L. J., & Gong, H. Q. (2001) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/11/1/304 · Cited by 227
Microfluidic systems with on-line UV detection fabricated in photodefinable epoxy
Jackman, R. J., Floyd, T. M., Ghodssi, R., Schmidt, M. A., & Jensen, K. F. (2001) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/11/3/316 · Cited by 220
Use of SU-8 photoresist for very high aspect ratio x-ray lithography
Bogdanov, A. L., & Peredkov, S. (2000) · Microelectronic Engineering · doi:10.1016/s0167-9317(00)00363-4 · Cited by 133
Improving the process capability of SU-8
Shaw, M., Nawrocki, D. J., Hurditch, R. J., & Johnson, D. W. (2003) · Microsystem Technologies · doi:10.1007/s00542-002-0216-4 · Cited by 64
Taguchi optimization for the processing of Epon SU-8 resist
Eyre, B., Blosiu, J. O., & Wiberg, D. V. (2002) · doi:10.1109/memsys.1998.659757 · Cited by 30
Cited by
Polymer microfabrication technologies for microfluidic systems
Becker, H., & Gärtner, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-007-1692-2 · Cited by 860
SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography
Campo, A. D., & Greiner, C. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/6/r01 · Cited by 825
Abgrall, P., & Gué, A.-M. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/5/r01 · Cited by 561
Fabrication Approaches for Generating Complex Micro- and Nanopatterns on Polymeric Surfaces
del Campo, A., & Arzt, E. (2008) · Chemical Reviews · doi:10.1021/cr050018y · Cited by 484
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Metadata
- Authors
- Lin, C.-H., Lee, G.-B., Chang, B.-W., & Chang, G.-L.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2002-06-21
- Volume
- 12
- Issue
- 5
- Pages
- 590-597
- ISSN
- 0960-1317 (ISSN-L)
- OpenAlex
- W2142303686
- Cited by
- 306
- References
- 7
- FWCI
- 15.07
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist. https://app.cochat.ai/papers/10.1088/0960-1317/12/5/312
- The paper
- Lin, C.-H., Lee, G.-B., Chang, B.-W., & Chang, G.-L. (2002). A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/12/5/312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.