The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Electromagnetic energy harvesting from vibrations of multiple frequencies
Open accessAbstract
A novel multi-frequency energy harvester has been designed and fabricated, which consists of three permanent magnets, three sets of two-layer copper coils and a supported beam of acrylic, while these coils are made of thin fire resistant 4 (FR4) substrates using a standard printed circuit board. The energy under the first, second and third resonant modes can be harvested, corresponding to the resonant frequencies of 369 Hz, 938 Hz and 1184 Hz, respectively. The maximum output voltage and power of the first and second vibration modes are 1.38 mV, 0.6 µW and 3.2 mV, 3.2 µW for a 14 µm exciting vibration amplitude and a 0.4 mm gap between the magnet and coils, respectively. The feasibility study results are in good agreement with the theoretical calculations and show promising application potentials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
Meirovitch, L., & Parker, R. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421112 · Cited by 1,211
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Architectures for Vibration-Driven Micropower Generators
Mitcheson, P. D., Green, T. C., Yeatman, E. M., & Holmes, A. S. (2004) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2004.830151 · Cited by 753
On the Effectiveness of Vibration-based Energy Harvesting
Roundy, S. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05054042 · Cited by 654
Review of Microscale Magnetic Power Generation
Arnold, D. P. (2007) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2007.906150 · Cited by 549
Piezoelectric multifrequency energy converter for power harvesting in autonomous microsystems
Ferrari, M., Ferrari, V., Guizzetti, M., Marioli, D., & Taroni, A. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.07.004 · Cited by 427
An electromagnetic micro power generator for wideband environmental vibrations
Sari, I., Balkan, T., & Kulah, H. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.021 · Cited by 405
Kulah, H., & Najafi, K. (2008) · IEEE Sensors Journal · doi:10.1109/jsen.2008.917125 · Cited by 361
Cited by
Liu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C. (2011) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2162488 · Cited by 361
Self-citationEffect of garment design on piezoelectricity harvesting from joint movement
Yang, J.-H., Cho, H.-S., Park, S.-H., Song, S.-H., Yun, K.-S., & Lee, J. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/3/035012 · Cited by 40
Metadata
- Authors
- Yang, B., Lee, C., Xiang, W., Xie, J., Han He, J., Kotlanka, R. K., Low, S. P., & Feng, H.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2009-01-30
- Volume
- 19
- Issue
- 3
- Pages
- 035001
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2093623164
- Cited by
- 384
- References
- 11
- FWCI
- 36.60
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electromagnetic energy harvesting from vibrations of multiple frequencies. https://app.cochat.ai/papers/10.1088/0960-1317/19/3/035001
- The paper
- Yang, B., Lee, C., Xiang, W., Xie, J., Han He, J., Kotlanka, R. K., Low, S. P., & Feng, H. (2009). Electromagnetic energy harvesting from vibrations of multiple frequencies. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/19/3/035001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
