The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Vibration-based damage detection in civil engineering: excitation sources and temperature effects
Open accessAbstract
This paper discusses two very relevant practical issues in the application of vibration-based health monitoring to civil engineering structures: the excitation source and the effect of temperature. The idea of vibration-based damage detection is to measure dynamic characteristics such as eigenfrequencies, damping ratios and mode shapes on a regular basis. The state, and eventually degradation, of the structure is reflected in the evolution of these characteristics. Unfortunately, it is not only the health of a structure that influences its measurable dynamics, but also the applied excitation and the changing temperature are important factors and may erode the damage detection potential. In the first part, the results of different excitation types are compared: band-limited noise generated by shakers, an impact from a drop weight and ambient sources such as wind and traffic. In the second part, the undeniable effect of temperature on measured eigenfrequencies is demonstrated and a methodology is proposed to distinguish these temperature effects from real damage events. The method could be validated on a unique data set from a bridge that was artificially damaged after a one-year monitoring period.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
System Identification: Theory for the User
Lennart Ljung, A. (1987) · Cited by 17,690
Subspace identification for linear systems: theory, implementation, applications
Overschee, P. V., & Moor, B. L. R. D. (1996) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,271
REFERENCE-BASED STOCHASTIC SUBSPACE IDENTIFICATION FOR OUTPUT-ONLY MODAL ANALYSIS
PEETERS, B., & DE ROECK, G. (1999) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1999.1249 · Cited by 1,520
Self-citationOne-year monitoring of the Z24-Bridge: environmental effects versus damage events
Peeters, B., & De Roeck, G. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/1096-9845(200102)30:2<149::aid-eqe1>3.0.co;2-z · Cited by 1,021
Self-citationAn experimental study of temperature effect on modal parameters of the Alamosa Canyon Bridge
Sohn, H., Dzwonczyk, M., Straser, E. G., Kiremidjian, A. S., Law, K. H., & Meng, T. (1999) · Earthquake Engineering & Structural Dynamics · doi:10.1002/(sici)1096-9845(199908)28:8<879::aid-eqe845>3.0.co;2-v · Cited by 344
Damage identification on the Z24 bridge using vibration monitoring
Maeck, J., Peeters, B., & Roeck, G. D. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/313 · Cited by 152
Self-citationInfluence of in-service environment on modal parameters
Alampalli, S. (1998) · Cited by 92
Askegaard, & Mossing, P. (1988) · Nordic Concrete Research/Nordic concrete research · Cited by 53
Cited by
Deraemaeker, A., Reynders, E., De Roeck, G., & Kullaa, J. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.004 · Cited by 580
Structural damage diagnosis under varying environmental conditions—Part I: A linear analysis
Yan, A.-M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.12.002 · Cited by 536
Machine learning algorithms for damage detection under operational and environmental variability
Figueiredo, E., Park, G., Farrar, C. R., Worden, K., & Figueiras, J. (2011) · Structural Health Monitoring · doi:10.1177/1475921710388971 · Cited by 440
Long-term monitoring and data analysis of the Tamar Bridge
Cross, E. J., Koo, K. Y., Brownjohn, J. M. W., & Worden, K. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.026 · Cited by 392
Vibration-based monitoring of civil infrastructure: challenges and successes
Brownjohn, J. M. W., De Stefano, A., Xu, Y.-L., Wenzel, H., & Aktan, A. E. (2011) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-011-0009-5 · Cited by 336
Metadata
- Authors
- Peeters, B., Maeck, J., & Roeck, G. D.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2001-06-01
- Volume
- 10
- Issue
- 3
- Pages
- 518-527
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2021609073
- Cited by
- 387
- References
- 8
- FWCI
- 29.93
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Vibration-based damage detection in civil engineering: excitation sources and temperature effects. https://app.cochat.ai/papers/10.1088/0964-1726/10/3/314
- The paper
- Peeters, B., Maeck, J., & Roeck, G. D. (2001). Vibration-based damage detection in civil engineering: excitation sources and temperature effects. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/10/3/314
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.