Thermo-mechanical behavior of epoxy shape memory polymer foams
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Shape memory polymer foams have significant potential in biomedical and aerospace applications, but their thermo-mechanical behavior under relevant deformation conditions is not well understood. In this paper we examine the thermo-mechanical behavior of epoxy shape memory polymer foams with an average relative density of nearly 20%. These foams are deformed under conditions of varying stress, strain, and temperature. The glass transition temperature of the foam was measured to be approximately 90 °C and compression and tensile tests were performed at temperatures ranging from 25 to 125 °C. Various shape recovery tests were used to measure recovery properties under different thermo-mechanical conditions. Tensile strain to failure was measured as a function of temperature to probe the maximum recovery limits of the foam in both temperature and strain space. Compression tests were performed to examine compressibility of the material as a function of temperature; these foams can be compacted as much as 80% and still experience full strain recovery over multiple cycles. Furthermore, both tensile strain to failure tests and cyclic compression recovery tests revealed that deforming at a temperature of 80 °C maximizes macroscopic strain recovery. Deformation temperatures above or below this optimal value lead to lower failure strains in tension and the accumulation of non-recoverable strains in cyclic compression. Micro-computed tomography (micro-CT) scans of the foam at various compressed states were used to understand foam deformation mechanisms. The micro-CT studies revealed the bending, buckling, and collapse of cells with increasing compression, consistent with results from published numerical simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shape memory polymer nanocomposites
Gall, K. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00368-3 · Cited by 429
Self-citationMechanical and shape memory behavior of composites with shape memory polymer
Ohki, T., Ni, Q.-Q., Ohsako, N., & Iwamoto, M. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.03.001 · Cited by 326
Cold hibernated elastic memory foams for endovascular interventions
Metcalfe, A., Desfaits, A.-C., Salazkin, I., Yahia, L., Sokolowski, W. M., & Raymond, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00362-9 · Cited by 307
Thermomechanics of shape memory polymer nanocomposites
Liu, Y., Gall, K., Dunn, M. L., & McCluskey, P. (2004) · Mechanics of Materials · doi:10.1016/j.mechmat.2003.08.012 · Cited by 283 · cited 1×
“To increase the stiffness and recoverable force levels in shape memory polymers, various researchers have developed SMP-based composites [15, 17]; including fiber-reinforced materials [13, 15, 17] and nano-particulate reinforced materials [14, 16].”
BackgroundSelf-citationDeformation Limits in Shape‐Memory Polymers
Yakacki, C. M., Willis, S., Luders, C., & Gall, K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700184 · Cited by 121
Self-citationTey, S. J., Huang, W. M., & Sokolowski, W. M. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/2/318 · Cited by 108
Tobushi, H., Matsui, R., Hayashi, S., & Shimada, D. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/4/026 · Cited by 107 · cited 2×
“Furthermore, there was no residual strain after cyclic compression when heated above Tg [2] and the effect of strain rate on mechanical properties increases when the foam is heated above the Tg [1].”
BackgroundResult
Cited by
On reducing anisotropy in 3D printed polymers via ionizing radiation
Shaffer, S., Yang, K., Vargas, J., Di Prima, M. A., & Voit, W. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.054 · Cited by 261
Self-citationThermal, mechanical and shape memory properties of shape memory epoxy resin
Liu, Y., Han, C., Tan, H., & Du, X. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.014 · Cited by 187
Adapting benzoxazine chemistry for unconventional applications
Kiskan, B. (2018) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2017.06.009 · Cited by 173
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
“means to tailor material properties for application requirements [271,272].”
BackgroundA self-healing 3D woven fabric reinforced shape memory polymer composite for impact mitigation
Nji, J., & Li, G. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/3/035007 · Cited by 131
Metadata
- Authors
- Di Prima, M. A., Lesniewski, M., Gall, K., McDowell, D. L., Sanderson, T., & Campbell, D.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2007-10-12
- Volume
- 16
- Issue
- 6
- Pages
- 2330-2340
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2008687011
- Cited by
- 124
- References
- 7
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermo-mechanical behavior of epoxy shape memory polymer foams. https://app.cochat.ai/papers/10.1088/0964-1726/16/6/037
- The paper
- Di Prima, M. A., Lesniewski, M., Gall, K., McDowell, D. L., Sanderson, T., & Campbell, D. (2007). Thermo-mechanical behavior of epoxy shape memory polymer foams. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/16/6/037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.