The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Diamond power devices: state of the art, modelling, figures of merit and future perspective
Open accessAbstract
With its remarkable electro-thermal properties such as the highest known thermal conductivity (~22 W cm−1∙K−1 at RT of any material, high hole mobility (>2000 cm 2 V−1 s−1), high critical electric field (>10 MV cm−1), and large band gap (5.47 eV), diamond has overwhelming advantages over silicon and other wide bandgap semiconductors (WBGs) for ultra-high-voltage and high-temperature (HT) applications (>3 kV and >450 K, respectively). However, despite their tremendous potential, fabricated devices based on this material have not yet delivered the expected high performance. The main reason behind this is the absence of shallow donor and acceptor species. The second reason is the lack of consistent physical models and design approaches specific to diamond-based devices that could significantly accelerate their development. The third reason is that the best performances of diamond devices are expected only when the highest electric field in reverse bias can be achieved, something that has not been widely obtained yet. In this context, HT operation and unique device structures based on the two-dimensional hole gas (2DHG) formation represent two alternatives that could alleviate the issue of the incomplete ionization of dopant species. Nevertheless, ultra-HT operations and device parallelization could result in severe thermal management issues and affect the overall stability and long-term reliability. In addition, problems connected to the reproducibility and long-term stability of 2DHG-based devices still need to be resolved. This review paper aims at addressing these issues by providing the power device research community with a detailed set of physical models, device designs and challenges associated with all the aspects of the diamond power device value chain, from the definition of figures of merit, the material growth and processing conditions, to packaging solutions and targeted applications. Finally, the paper will conclude with suggestions on how to design power converters with diamond devices and will provide the roadmap of diamond device development for power electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
(2002) · Kluwer Academic Publishers eBooks · doi:10.1007/b117561 · Cited by 13,963
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685
Fundamentals of Power Semiconductor Devices
Baliga, B. J. (2008) · Springer eBooks · doi:10.1007/978-0-387-47314-7 · Cited by 2,174
MOS /metal oxide semiconductor/ physics and technology
Nicollian, E. H., & Brews, J. R. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,098
Band offsets of wide-band-gap oxides and implications for future electronic devices
Robertson, J. (2000) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.591472 · Cited by 2,049
High Carrier Mobility in Single-Crystal Plasma-Deposited Diamond
Isberg, J., Hammersberg, J., Johansson, E., Wikström, T., Twitchen, D. J., Whitehead, A. J., Coe, S. E., & Scarsbrook, G. A. (2002) · Science · doi:10.1126/science.1074374 · Cited by 1,321
Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259
Electron Affinity of the Bare and Hydrogen Covered Single Crystal Diamond (111) Surface
Cui, J., Ristein, J., & Ley, L. (1998) · Physical Review Letters · doi:10.1103/physrevlett.81.429 · Cited by 462
Wide-bandgap semiconductor materials: For their full bloom
Fujita, S. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.030101 · Cited by 383
Advanced Materials for Thermal Management of Electronic Packaging
Tong, X. C. (2011) · Springer Series in Advanced Microelectronics · doi:10.1007/978-1-4419-7759-5 · Cited by 302
Ueda, K., Kasu, M., Yamauchi, Y., Makimoto, T., Schwitters, M., Twitchen, D. J., Scarsbrook, G. A., & Coe, S. E. (2006) · IEEE Electron Device Letters · doi:10.1109/led.2006.876325 · Cited by 276
Normally-Off C–H Diamond MOSFETs With Partial C–O Channel Achieving 2-kV Breakdown Voltage
Kitabayashi, Y., Kudo, T., Tsuboi, H., Yamada, T., Xu, D., Shibata, M., Matsumura, D., Hayashi, Y., Syamsul, M., Inaba, M., et al. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2661340 · Cited by 223
Mönch, W. (1996) · Journal of Applied Physics · doi:10.1063/1.363486 · Cited by 174
Smart Power Devices and ICs Using GaAs and Wide and Extreme Bandgap Semiconductors
Chow, T. P., Omura, I., Higashiwaki, M., Kawarada, H., & Pala, V. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2653759 · Cited by 166
Extreme efficiency power electronics
Kolar, J. W., Krismer, F., Lobsiger, Y., Mühlethaler, J., Nußbaumer, T., & Minibock, J. (2012) · Cited by 165
SiC and GaN devices – wide bandgap is not all the same
Kaminski, N., & Hilt, O. (2014) · IET Circuits, Devices & Systems · doi:10.1049/iet-cds.2013.0223 · Cited by 164
Ion Implantation in Diamond, Graphite and Related Materials
Dresselhaus, M. S., Kalish, R., & Prins, J. F. (1993) · Physics Today · doi:10.1063/1.2808905 · Cited by 162
Brunt, E. V., Cheng, L., O’Loughlin, M. J., Richmond, J., Pala, V., Palmour, J. W., Tipton, C. W., & Scozzie, C. J. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.821-823.847 · Cited by 147
Power Electronics Device Applications of Diamond Semiconductors
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-03999-2 · Cited by 118
Diamond bipolar junction transistor device with phosphorus-doped diamond base layer
Kato, H., Oyama, K., Makino, T., Ogura, M., Takeuchi, D., & Yamasaki, S. (2012) · Diamond and Related Materials · doi:10.1016/j.diamond.2012.05.004 · Cited by 75
New power device figure of merit for high-frequency applications
Kim, I.-J., Matsumoto, S., Sakai, T., & Yachi, T. (2002) · doi:10.1109/ispsd.1995.515055 · Cited by 74
Negative electron affinity of diamond and its application to high voltage vacuum power switches
Takeuchi, D., Koizumi, S., Makino, T., Kato, H., Ogura, M., Ohashi, H., Okushi, H., & Yamasaki, S. (2013) · physica status solidi (a) · doi:10.1002/pssa.201300385 · Cited by 65
The IGBT Device: Physics, Design and Applications of the Insulated Gate Bipolar Transistor
Baliga, B. J. (2015) · Cited by 61
Design and Characterization of High-Voltage 4H-SiC p-IGBTs
Zhang, Q., Huang, A. Q., Wang, J., Jonas, C., Callanan, R., Sumakeris, J. J., Ryu, S., Das, M. K., Agarwal, A., & Palmour, J. W. (2008) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.926627 · Cited by 57
Analysis of the reverse I-V characteristics of diamond-based PIN diodes
Saremi, M., Hathwar, R., Dutta, M., Koeck, F. A. M., Nemanich, R. J., Chowdhury, S., & Goodnick, S. M. (2017) · Applied Physics Letters · doi:10.1063/1.4986756 · Cited by 57
Comprehensive electrical analysis of metal/Al2O3/O-terminated diamond capacitance
Pham, T. T., Maréchal, A., Muret, P., Eon, D., Gheeraert, E., Rouger, N., & Pernot, J. (2017) · Journal of Applied Physics · doi:10.1063/1.4996114 · Cited by 56
Self-citationDesign and fabrication of high-performance diamond triple-gate field-effect transistors
Liu, J., Ohsato, H., Wang, X., Liao, M., & Koide, Y. (2016) · Scientific Reports · doi:10.1038/srep34757 · Cited by 51
High-Temperature Bipolar-Mode Operation of Normally-Off Diamond JFET
Iwasaki, T., Kato, H., Makino, T., Ogura, M., Takeuchi, D., Yamasaki, S., & Hatano, M. (2016) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2016.2624301 · Cited by 44
Successful Development of 1.2 kV 4H-SiC MOSFETs with the Very Low On-Resistance of 5 mΩcm2
Miura, N., Fujihira, K., Nakao, Y., Watanabe, T., Tarui, Y., Kinouchi, S. I., Imaizumi, M., & Oomori, T. (2006) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2006.1666121 · Cited by 40
Integrated temperature sensor with diamond Schottky diodes using a thermosensitive parameter
Perez, G., Chicot, G., Avenas, Y., Lefranc, P., Jeannin, P., Eon, D., & Rouger, N. (2017) · Diamond and Related Materials · doi:10.1016/j.diamond.2017.08.008 · Cited by 38
Self-citationBehavior of MOS inversion layers at low temperature
Goetzberger, A. (1967) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1967.16109 · Cited by 29
Trade-off between losses and EMI issues in three-phase SiC inverters for aircraft applications
Santos, V. D., Cougo, B., Roux, N., Sareni, B., Revol, B., & Carayon, J. (2017) · IEEE International Symposium on Electromagnetic Compatibility · doi:10.1109/isemc.2017.8077991 · Cited by 29
Matsumoto, Y., Ishii, M., & Sekimizu, K. (2016) · Scientific Reports · doi:10.1038/srep26354 · Cited by 28
Design and optimization of planar mesa termination for diamond Schottky barrier diodes
Nawawi, A., Tseng, K. J., Rusli, Amaratunga, G. A. J., Umezawa, H., & Shikata, S. (2013) · Diamond and Related Materials · doi:10.1016/j.diamond.2013.04.009 · Cited by 19
Impact of Nonhomoepitaxial Defects in Depleted Diamond MOS Capacitors
Pham, T. T., Pinero, J. C., Maréchal, A., Gutierrez, M., Lloret, F., Eon, D., Gheeraert, E., Rouger, N., Araújo, D., & Pernot, J. (2018) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2018.2813084 · Cited by 9
Self-citationParallel and interleaved structures for diamond Schottky diodes
Perez, G., Lefranc, P., Jeannin, P., Eon, D., & Rouger, N. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099014 · Cited by 7
Self-citation
Cited by
Structure, Properties and Applications of Two‐Dimensional Hexagonal Boron Nitride
Roy, S., Zhang, X., Puthirath, A. B., Meiyazhagan, A., Bhattacharyya, S., Rahman, M. M., Babu, G., Susarla, S., Saju, S. K., Tran, M. K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101589 · Cited by 871
Power device breakdown mechanism and characterization: review and perspective
Zhang, R., & Zhang, Y. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acb365 · Cited by 40
Metadata
- Authors
- Donato, N., Rouger, N., Pernot, J., Longobardi, G., & Udrea, F.
- Venue
- Journal of Physics D: Applied Physics
- Publisher
- IOP Publishing
- Published
- 2019-12-17
- Volume
- 53
- Issue
- 9
- Pages
- 093001
- ISSN
- 0022-3727 (ISSN-L)
- 1361-6463
- OpenAlex
- W2996238279
- Cited by
- 315
- References
- 36
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.