Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.

High-sensitivity operation of single-beam optically pumped magnetometer in a kHz frequency range

Open access
Savukov, I, Kim, Y J, Shah, V, Boshier, M G · 2017 · Measurement Science and Technology

Abstract

Optically pumped magnetometers (OPM) can be used in various applications, from magnetoencephalography to magnetic resonance imaging and nuclear quadrupole resonance (NQR). OPMs provide high sensitivity and have the significant advantage of non-cryogenic operation. To date, many magnetometers have been demonstrated with sensitivity close to 1 fT, but most devices are not commercialized. Most recently, QuSpin developed a model of OPM that is low cost, high sensitivity, and convenient for users, which operates in a single-beam configuration. Here we developed a theory of single-beam (or parallel two-beam) magnetometers and showed that it is possible to achieve good sensitivity beyond their usual frequency range by tuning the magnetic field. Experimentally we have tested and optimized a QuSpin OPM for operation in the frequency range from DC to 1.7 kHz, and found that the performance was only slightly inferior despite the expected decrease due to deviation from the spin-exchange relaxation-free regime.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1088/1361-6501/aa58b4

Cites

21 of 21 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Experimental setup to investigate the sensitivity of the QuSpin OPM at high frequency range (not scaled).
Figure 1 Experimental setup to investigate the sensitivity of the QuSpin OPM at high frequency range (not scaled).CC-BY · From the PDF
Figure 2 Schematic showing the basic operation of the QuSpin OPM. (1) 795 nm laser. (2) Collimating lens. (3) Linear polarizer. (4) Circular polarizer. (5) Light beam. (6) Reflecting prisms. (7) Vapor cell. (8) Photodiode. (Coils not shown). The amplitude of the two components of the magnetic field that are perpendicular to the beam can be simultaneously measured via assessment of changes in the light intensity at the photodiode.
Figure 2 Schematic showing the basic operation of the QuSpin OPM. (1) 795 nm laser. (2) Collimating lens. (3) Linear polarizer. (4) Circular polarizer. (5) Light beam. (6) Reflecting prisms. (7) Vapor cell. (8) Photodiode. (Coils not shown). The amplitude of the two components of the magnetic field that are perpendicular to the beam can be simultaneously measured via assessment of changes in the light intensity at the photodiode.CC-BY · From the PDF
Figure 3 OPM response to the oscillating calibration field at different frequencies. The three leftmost points are obtained when the modulation field was applied (the normal QuSpin OPM operation) and the rest are obtained when the optimized DC offset field was applied, different for each frequency.
Figure 3 OPM response to the oscillating calibration field at different frequencies. The three leftmost points are obtained when the modulation field was applied (the normal QuSpin OPM operation) and the rest are obtained when the optimized DC offset field was applied, different for each frequency.CC-BY · From the PDF
Figure 4 Field noise measurements of the OPM at different frequencies and projected sensitivity (solid red curve).
Figure 4 Field noise measurements of the OPM at different frequencies and projected sensitivity (solid red curve).CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 21 references

Cited by

See all 87

Metadata

Authors
Savukov, I., Kim, Y. J., Shah, V, & Boshier, M. G.
Affiliations
  • Los Alamos National Laboratory (US)
  • QuSpin (United States) (US)
Corresponding author
Savukov, I
Venue
Measurement Science and Technology
Published
2017-02-02
Volume
28
Issue
3
Pages
035104
ISSN
  • 0957-0233 (ISSN-L)
  • 1361-6501
OpenAlex
W2573282927
Cited by
86
References
21
Citations by year
2026: 7 · 2025: 9 · 2024: 12 · 2023: 10 · 2022: 17 · 2021: 14 · 2020: 6 · 2019: 8 · 2018: 3
FWCI
2.28
Type
journal article
Language
en
Open access
Licence
Locations
  • Measurement Science and Technology (publishedVersion, cc-by)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
U.S. DOE through the LANL/LDRD
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Atomic and Subatomic Physics Research
  • Physical Sciences › Chemistry › Spectroscopy › Electron Spin Resonance Studies
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Mechanical and Optical Resonators
Keywords
optically pumped magnetometers, high sensitivity, magnetic field tuning

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: High-sensitivity operation of single-beam optically pumped magnetometer in a kHz frequency range. https://app.cochat.ai/papers/10.1088/1361-6501/aa58b4
The paper
Savukov, I., Kim, Y. J., Shah, V, & Boshier, M. G. (2017). High-sensitivity operation of single-beam optically pumped magnetometer in a kHz frequency range. Measurement Science and Technology. https://doi.org/10.1088/1361-6501/aa58b4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.