The DOI matches its Crossref record; 474 of the 477 references it cites were found in a registry or an index.
A review of energy harvesting using piezoelectric materials: state-of-the-art a decade later (2008–2018)
Open accessAbstract
Abstract Energy harvesting technologies have been explored by researchers for more than two decades as an alternative to conventional power sources (e.g. batteries) for small-sized and low-power electronic devices. The limited life-time and necessity for periodic recharging or replacement of batteries has been a consistent issue in portable, remote, and implantable devices. Ambient energy can usually be found in the form of solar energy, thermal energy, and vibration energy. Amongst these energy sources, vibration energy presents a persistent presence in nature and manmade structures. Various materials and transduction mechanisms have the ability to convert vibratory energy to useful electrical energy, such as piezoelectric, electromagnetic, and electrostatic generators. Piezoelectric transducers, with their inherent electromechanical coupling and high power density compared to electromagnetic and electrostatic transducers, have been widely explored to generate power from vibration energy sources. A topical review of piezoelectric energy harvesting methods was carried out and published in this journal by the authors in 2007. Since 2007, countless researchers have introduced novel materials, transduction mechanisms, electrical circuits, and analytical models to improve various aspects of piezoelectric energy harvesting devices. Additionally, many researchers have also reported novel applications of piezoelectric energy harvesting technology in the past decade. While the body of literature in the field of piezoelectric energy harvesting has grown significantly since 2007, this paper presents an update to the authors’ previous review paper by summarizing the notable developments in the field of piezoelectric energy harvesting through the past decade.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 401–474 of 474
Safaei, M., Meneghini, R. M., & Anton, S. R. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aad755 · Cited by 38
Self-citationYue, Y., Hou, Y., Zheng, M., Yan, X., Fu, J., & Zhu, M. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.06.053 · Cited by 37 · cited 1×
“In a work performed by Yue et al in 2017 [80], MnO2 doped PZN-PZT nanopowders were synthesized and used to fabricate ceramics in a wide sintering temperature window.”
MethodAsymmetric PZT bimorph cantilever for multi-dimensional ambient vibration harvesting
Park, J. C., & Park, J. Y. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.10.155 · Cited by 36 · cited 2×
“mechanical boundary conditions and different beam configurations, including designs with a dynamic amplifier support instead of a fixed end [151] (figure 3(c)), an asymmetric tuned mass [152] (figure 3(d)), clamped-clamped boundary conditions with compressive load [150], multiple inertia masses [153, 154], added auxil…”
BackgroundEnhanced active piezoelectric 0-3 nanocomposites fabricated through electrospun nanowires
Feenstra, J. R., & Sodano, H. A. (2008) · Journal of Applied Physics · doi:10.1063/1.2939271 · Cited by 35
Self-citationPalneedi, H., Annapureddy, V., Lee, H.-Y., Choi, J., Choi, S., Chung, S., Kang, S. L., & Ryu, J. (2017) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2016.12.005 · Cited by 35
Sohn, J. I., Jung, Y.-I., Baek, S., Cha, S., Jang, J. E., Cho, C., Kim, J. H., Kim, J. M., & Park, I. (2013) · Nanoscale · doi:10.1039/c3nr05128e · Cited by 34
Output response identification in a multistable system for piezoelectric energy harvesting
Harris, P., Arafa, M. H., Grzegorz Litak, A., Bowen, C., & Iwaniec, J. (2017) · The European Physical Journal B · doi:10.1140/epjb/e2016-70619-y · Cited by 33 · cited 1×
“More recently, Harris et al in 2017 [223] demonstrated that, with the help of continuous wavelet”
BackgroundBlackburn, J. L., Ferguson, A. J., Cho, C., & Grunlan, J. C. (2018) · Advanced Materials · doi:10.1002/adma.201870072 · Cited by 33
Wang, W., Cao, J., Mallick, D., Roy, S., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.035 · Cited by 33
The case for energy harvesting on wildlife in flight
Shafer, M. W., MacCurdy, R. B., Shipley, J. R., Winkler, D. A., Guglielmo, C. G., & Garcia, E. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/2/025031 · Cited by 32 · cited 4×
“Shafer et al [424] Birds harvester A 40 g bird Bimorph PZT-5A 1.”
BackgroundInfluentialIn Situ Damage Detection for Fiber‐Reinforced Composites Using Integrated Zinc Oxide Nanowires
Groo, L., Inman, D. J., & Sodano, H. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802846 · Cited by 32
Self-citationPENDEXE: A novel energy harvesting concept for low frequency human waistline
Shukla, R., & Bell, A. J. (2014) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2014.11.016 · Cited by 31 · cited 5×
“A novel design of a low frequency piezoelectric energy harvester was proposed by Shukla and Bell in 2015 [390].”
BackgroundInfluentialStacked and folded piezoelectrets for vibration-based energy harvesting
Sessler, G. M., Pondrom, P., & Zhang, X. (2016) · Phase Transitions · doi:10.1080/01411594.2016.1202408 · Cited by 31 · cited 1×
“Later in 2016 [139], this group performed a systematic study to investigate the effect of seismic mass and number of layers on the energy harvesting performance of stacked and folded piezoelectret foams.”
BackgroundBarium Titanate Film Interfaces for Hybrid Composite Energy Harvesters
Bowland, C. C., Malakooti, M. H., & Sodano, H. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15011 · Cited by 31
Self-citationStructurally embedded reflectors and mirrors for elastic wave focusing and energy harvesting
Tol, Ş., Degertekin, F. L., & Ertürk, A. (2017) · Journal of Applied Physics · doi:10.1063/1.5008724 · Cited by 31 · cited 2×
“In 2017, this research group investigated the feasibility of using structurally embedded mirrors using simulation and experimentation [273].”
BackgroundUltra-Low Wind Speed Piezoelectric Windmill
Kishore, R. A., Vučković, D., & Priya, S. (2014) · Ferroelectrics · doi:10.1080/00150193.2014.875315 · Cited by 30 · cited 5×
“Author Device Transducer Type Generator Material Dimensions Wind Speed (m s−1) Cut-in Speed (m s−1) Output Power Priya et al [317] Fan-type windmill Piezoelectric bimorph PZT-5H 114 mm diameter×60 mm width, 60×20×0.6 mm3 each beam 4.47 — 7.5 mW Myers et al [318] Vane-type vertical windmill Piezoelectric bimorph PZT-5H…”
BackgroundInfluentialAnalysis and Optimization of a Piezoelectric Harvester on a Car Damper
Lafarge, B., Delebarre, C., Grondel, S., Curea, O., & Hacala-Perret, A. (2015) · Physics Procedia · doi:10.1016/j.phpro.2015.08.202 · Cited by 28 · cited 1×
“Various piezoelectric harvester designs for energy harvesting form vehicles including (a) tire resonant harvester (reproduced with permission from [438]), (b) inertial vibrating harvester (reprinted from [439], Copyright 2012, with permission from Elsevier), (c) piezoelectric bender patch (reprinted by permission from…”
Three-axis piezoelectric vibration energy harvester
Aktakka, E. E., & Najafi, K. (2015) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2015.7051166 · Cited by 27 · cited 2×
“Reprinted, with permission, from [183]), (f) plate with MFC patch (reproduced from[185].”
MethodPassive multi-source energy harvesting schemes
Schlichting, A. D., Tiwari, R., & Garcia, E. (2012) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12455723 · Cited by 27 · cited 1×
“In another work [462], this group analytically explored several energy harvesting circuit designs capable of simultaneously harvesting energy from the solar and vibration energy harvesters and provided comparisons between the designs.”
BackgroundContact-less Wind Turbine Utilizing Piezoelectric Bimorphs with Magnetic Actuation
Bressers, S., Avirovik, D., Lallart, M., Inman, D. J., & Priya, S. (2011) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-1-4419-9834-7_21 · Cited by 26 · cited 4×
“In 2011, Bressers et al [320] introduced a contact-less wind turbine utilizing a nonlinear piezomagnetic configuration.”
BackgroundMethodInfluentialHuman passive motions and a user-friendly energy harvesting system
Abdi, H., Mohajer, N., & Nahavandi, S. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13502854 · Cited by 26 · cited 4×
“Using an integrated array of piezoelectric films and a harvesting circuit placed within a pant belt, Abdi et al in 2014 [400] showed that 1.”
BackgroundMethodInfluentialEnergy harvesting for wireless sensor networks: applications and challenges in smart grid
Ma, S., Yaoqing, Lamar, N. A., Yang, N., Qian, Y., Sharif, H., & Alahmad, M. A. (2016) · International Journal of Sensor Networks · doi:10.1504/ijsnet.2016.079173 · Cited by 26
Yan, X., Zheng, M., Hou, Y., Zhu, M., & Yan, H. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15396 · Cited by 26
0–3 type Bi3TaTiO9:40wt%BiFeO3 composite with improved high-temperature piezoelectric properties
Qaiser, M. A., Hussain, A., Zhang, J., Wang, Y., Zhang, S., Chen, L., & Yuan, G. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.12.365 · Cited by 25 · cited 1×
“A 0–3-type composite was developed by Qaiser et al in 2018 [98] with embedded BiFeO3 (BFO) grains in the Bi3TaTiO9 (BTTO) matrix to combine the acceptable piezoelectric coefficient of BFO and the high temperature resistance of BTTO.”
MethodMohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3908 · Cited by 24 · cited 1×
“Another ferroelectret foam material developed by Mohebbi et al in 2017 [142] using nitrogen as the ionizing gas showed a d33 coefficient as high as 550 pC N , which is twice as high as the coefficients reported in the literature for previously fabricated foams using air as the ionizing gas.”
BackgroundTaylor, S. G., Farinholt, K. M., Park, G., Todd, M. D., & Farrar, C. R. (2010) · Smart Structures and Systems · doi:10.12989/sss.2010.6.5_6.661 · Cited by 23 · cited 1×
“0 (wireless impedance device) sensor node [463].”
Sharpes, N., Abdelkefi, A., & Priya, S. (2014) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0007 · Cited by 23
Moon, S. E., Lee, S. Q., Lee, S.-K., Lee, Y., Yang, Y. S., Park, K.-H., & Kim, J.-D. (2009) · ETRI Journal · doi:10.4218/etrij.09.1209.0015 · Cited by 23 · cited 2×
“In 2009, Moon et al [76] investigated a similar PMN-PZT 3 Smart Mater.”
BackgroundEfficient energy harvesting from human motion using wearable piezoelectric shell structures
Yang, B., & Yun, K. (2011) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2011.5969874 · Cited by 22 · cited 4×
“An improved fabric-like piezoelectric energy harvester was proposed and tested by Song and Yun in 2015 [387].”
BackgroundInfluentialNonlinear Piezoelectric Energy Harvester with Ball Tip Mass
Ahn, J. H., Hwang, W. S., Jeong, S., Cho, J. Y., Hong, S. D., Hwang, S. J., Song, G. J., Yoo, H. H., & Sung, T. H. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.03.015 · Cited by 22 · cited 2×
“In 2018, Ahn et al [239] introduced a creative way”
BackgroundZhou, M., Fu, Y., Liu, L., Xu, Z., Al-Furjan, M. S. H., & Wang, W. (2018) · Meccanica · doi:10.1007/s11012-018-0826-2 · Cited by 22 · cited 1×
“Zhou et al in 2018 [373] introduced a novel piezoelectric tubular energy harvester configuration in order to generate power from fluctuating fluid pressure inside tubes.”
BackgroundKo, S., Park, J.-H., Kim, I.-W., Won, S. S., Chung, S., & Kang, S. L. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.07.023 · Cited by 21
Piezoelectric glass-ceramic for high-temperature applications
Davis, M. J., Vullo, P., Kocher, M., Hovhannisyan, M., & Letz, M. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.03.038 · Cited by 21 · cited 1×
“Davis et al in 2018 [102] developed a novel non-ferroelectric piezoelectric material with a glass-”
BackgroundComposite Piezoelectric Paints
Klein, K., Safari, A., Newnham, R. E., & Runt, J. P. (1986) · IEEE International Symposium on Applications of Ferroelectrics (ISAF) · doi:10.1109/isaf.1986.201143 · Cited by 20 · cited 1×
“Initial studies on PZT paint sensors based on 0–3 piezoelectric composites were performed in the mid 1980’s by Klein et al [105] and Hanner et al [106] using a waterbased suspension of piezoceramic and polymer.”
MethodRao, G. B., Rajesh, P., & Ramasamy, P. (2016) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2016.11.083 · Cited by 20
Safaei, M., Meneghini, R. M., & Anton, S. R. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa814e · Cited by 19
Self-citationAn E-shape broadband piezoelectric energy harvester induced by magnets
Lu, Q., Scarpa, F. L., Liu, L., Leng, J., & Liu, Y. (2018) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x18770871 · Cited by 19 · cited 1×
“Lu et al in 2018 [242] introduced a nonlinear”
BackgroundProulx, T. (2011) · River Publishers eBooks · doi:10.1007/978-1-4419-9834-7 · Cited by 18
Unipolar synchronized electric charge extraction for piezoelectric energy harvesting
Brenes, A., Lefeuvre, É., Badel, A., Seok, S., & Yoo, C. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaca58 · Cited by 18
Andrews, C., Lin, Y., Tang, H., & Sodano, H. A. (2011) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x11416025 · Cited by 17 · cited 1×
“This study was followed up with a theoretical analysis of the nanocomposites with high aspect ratio using micromechanics [122] and validation of the theory [123].”
MethodSelf-citationSelf-powered active control of elastic and aeroelastic oscillations using piezoelectric material
Silva, T. M. P., & Marqui, C. D. (2017) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x16685448 · Cited by 17 · cited 1×
“More recently, in 2017, Silva and De Marqui [347] presented the concept of self-powered active control of base excitation and aeroeleastic oscillation of wings using a sensor-actuator piezoelectric system.”
BackgroundAnton, S. R., Ertürk, A., & Inman, D. J. (2009) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.815799 · Cited by 16
Self-citationElectrical power generation from insect flight
Reissman, T., MacCurdy, R. B., & Garcia, E. (2011) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.880702 · Cited by 16 · cited 4×
“Reissman et al [420] Piezoelectric beam Hawkmoth Unimorph PZT-5H 0.”
BackgroundInfluentialLow-Power Analog Techniques, Sensors for Mobile Devices, and Energy Efficient Amplifiers
Makinwa, K. A. A., Baschirotto, A., & Harpe, P. J. A. (2019) · Springer eBooks · doi:10.1007/978-3-319-97870-3 · Cited by 16
Cao, S., Wang, X., Zheng, J., Cao, S., Sun, J., Wang, Z., & Zhang, C. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2831000 · Cited by 15
Harvestable vibrational energy from an avian source: theoretical predictions vs. measured values
Shafer, M. W., MacCurdy, R. B., Garcia, E., & Winkler, D. A. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.915370 · Cited by 14
Energy Harvesting for Marine-Wildlife Monitoring
Shafer, M. W., & Morgan, E. R. (2014) · doi:10.1115/smasis2014-7630 · Cited by 12 · cited 1×
“research group in 2014 [425] in order to prolong the life of the”
A Methodology for Applying Energy Harvesting to Extend Wildlife Tag Lifetime
MacCurdy, R. B., Reissman, T., Garcia, E., & Winkler, D. A. (2008) · doi:10.1115/imece2008-68082 · Cited by 12 · cited 1×
“Piezoelectric generators were suggested to scavenge the kinetic energy of insects during flight [419].”
BackgroundA Magnetostrictive Energy Harvesting System for Bridge Structural Health Monitoring
Clemente, C. S., Davino, D., Maddaloni, G., Pecce, M., & Visone, C. (2016) · Advances in science and technology · doi:10.4028/www.scientific.net/ast.101.20 · Cited by 12
A Comprehensive Method to Taxonomize Mechanical Energy Harvesting Technologies
Diez, P. L., Gabilondo, I., Alarcón, E., & Moll, F. (2018) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2018.8350907 · Cited by 12
Zhao, D., Gan, M., Zhang, C., Wei, J., Liu, S., & Wang, T. (2018) · Materials Research Express · doi:10.1088/2053-1591/aad491 · Cited by 12
Harvesting Vibration Energy for Structural Health Monitoring in Aircraft
Featherston, C., Holford, K. M., & Greaves, B. (2009) · Key engineering materials · doi:10.4028/www.scientific.net/kem.413-414.439 · Cited by 11
Battery-Less Wireless Instrumented Knee Implant
Holmberg, J., Alexander, L., Rajamani, R., & Bechtold, J. E. (2013) · Journal of Medical Devices · doi:10.1115/1.4023412 · Cited by 11 · cited 1×
“In a study performed by Holmberg et al in 2013 [403], a wireless self-powered sensory system was embedded inside the tibial tray of a knee replacement that utilized a piezoelectric stack which provides the required power for six capacitive force sensors.”
MethodBrenes, A., Lefeuvre, É., & Yoo, C.-S. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1052/1/012050 · Cited by 10
MECHANICAL ENERGY SCAVENGING FROM FLYING INSECTS
Aktakka, E. E., Kim, H., Atashbar, M. Z., & Najafi, K. (2008) · Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head Workshop) · doi:10.31438/trf.hh2008.100 · Cited by 8 · cited 1×
“In a similar study inspired by the idea of hybrid insect vehicles, Aktakka et al in 2011 [421, 423] presented a nonresonant piezoelectric device to harvest energy from a live insect (Green June Beetle) with a body mass of 1.”
BackgroundAdvances in ocean wave energy converters using piezoelectric materials
Zheng, L. (2011) · Journal of Hydroelectric Engineering · Cited by 8
Introduction to Energy Harvesting Transducers and Their Power Conditioning Circuits
Chen, B. (2019) · Springer eBooks · doi:10.1007/978-3-319-97870-3_1 · Cited by 8 · cited 1×
“The reader is referred to the review articles by Guyomar and Lallart in 2011 [310] and Szarka et al in 2012 [311] as well as the book chapters by Badel and Lefeuvre in 2016 [305], and Chen in 2019 [312] for a more comprehensive review on piezoelectric energy harvesting conditioning circuits.”
MethodShunt-diode rectifier: a new scheme for efficient piezoelectric energy harvesting
Brenes, A., Lefeuvre, É., Badel, A., Seok, S., & Yoo, C. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaefc5 · Cited by 8 · cited 1×
“Brenes et al in 2018 [308] introduced the application of the shunt-diode method in piezoelectric energy harvesting along with an impedance matching circuit designed for generators with strong electromechanical coupling.”
MethodSelf-Powered and Soft Polymer MEMS/NEMS Devices
Kottapalli, A. G. P., Tao, K., Sengupta, D., & Triantafyllou, M. S. (2019) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-3-030-05554-7 · Cited by 8 · cited 1×
“The reader is referred to the comprehensive reviews of MEMS piezoelectric harvesting presented by Saadon and Sidek in 2011 [21], Priya et al in 2017 [263], and Tian et al in 2018 [264] as well as the book by Kottapalli et al in 2019 [265] for a more complete treatment of the field.”
MethodAnton, S. R., Taylor, S., Raby, E. Y., & Farinholt, K. M. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2010637 · Cited by 7 · cited 2×
“All rights reserved), (b) piezoelectric-solar harvester on turbine blade (copyright [456] 2013.”
BackgroundSelf-citationPiezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows
Amini, Y., Emdad, H., & Farid, M. (2017) · Scientia Iranica · doi:10.24200/sci.2017.4240 · Cited by 7 · cited 1×
“Similar results were found by Amini et al in 2017 [340] for a comparable piezoelectric device.”
ResultDasgupta, S. S., Rajamohan, V., & Jha, A. K. (2018) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-018-3187-1 · Cited by 7
Ray, C. A., & Anton, S. R. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2084237 · Cited by 6 · cited 8×
“In 2014, Anton et al [137] investigated vibration energy harvesting using ferroelectret foam material.”
BackgroundMethodInfluentialSelf-citationAn Ultra-Lightweight Multi-Source Power Harvesting System for Insect Cyborg Sentinels
Reissman, T., & Garcia, E. (2008) · ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) · doi:10.1115/smasis2008-662 · Cited by 6 · cited 1×
“Initial studies on flying insects showed that three sources of energy are available at milligram and miniature-scale including solar, thermal, and kinetic energy [416].”
BackgroundMulti-mode and multi-axis vibration power generation effective for vehicles
Hashimoto, S., Zhang, Y., Nagai, N., Fujikura, Y., Takahashi, J., Kumagai, S., Kasai, M., Suto, K., Okada, H., & Jiang, W. Y. (2013) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2013.6563689 · Cited by 6 · cited 1×
“mechanical boundary conditions and different beam configurations, including designs with a dynamic amplifier support instead of a fixed end [151] (figure 3(c)), an asymmetric tuned mass [152] (figure 3(d)), clamped-clamped boundary conditions with compressive load [150], multiple inertia masses [153, 154], added auxil…”
BackgroundSTR-991: ENERGY HARVESTING METHODS FOR STRUCTURAL HEALTH MONITORING USING WIRELESS SENSORS: A REVIEW
Banerji, S., Bagchi, A., & Khazaeli, S. (2016) · Scholarship@Western (Western University) · Cited by 6
Cyborg MAVs Using Power Harvesting and Behavioral Control Schemes
Reissman, T., & Garcia, E. (2008) · Advances in science and technology · doi:10.4028/www.scientific.net/ast.58.159 · Cited by 5 · cited 1×
“First proposed by Reissman and Garcia in 2008 [418], the possibility of harvesting vibration energy during flight of a moth using piezoelectric materials was investigated.”
BackgroundPhotovoltaic energy harvesting in indoor environments
Chen, Y.-C., Pan, C.-P., Lin, C., Hwang, C.-H., & Chen, H. (2018) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2018.8409628 · Cited by 5
A self-reliant avian bio-logger: energy storage considerations
Schlichting, A. D., & Garcia, E. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/23/1/015004 · Cited by 4 · cited 1×
“In a study performed by Schlichting and Garcia in 2013 [461], the potential of energy harvesting from solar and vibratory energy in order to power a bio-logger for bird tracking and biophysical monitoring during migration was investigated.”
BackgroundSelf-powered device for tibiofemoral force measurement in knee implant
Almouahed, S., Hamitouche, C., & Stindel, É. (2016) · International Conference on Advanced Technologies for Signal and Image Processing · doi:10.1109/atsip.2016.7523106 · Cited by 4
Fluids energy harvesting system with low cut-in velocity piezoelectric MEMS
Biccario, G. E., Vittorio, M. D., & D'Amico, S. (2017) · IEEE International Conference on IC Design and Technology (ICICDT) · doi:10.1109/icicdt.2017.7993506 · Cited by 4 · cited 1×
“In order to enhance the power harvesting efficiency of wind energy harvesters, Biccario et al in 2017 [324] suggested a new architecture of harvesting circuit that employs two storage capacitors: a small and fast-to-charge capacitor to power the active start-up circuit, and a large capacitor for storing the power.”
BackgroundExperimental Study of the Mechanics of Motion of Flapping Insect Flight Under Weight Loading
Reissman, T., MacCurdy, R. B., & Garcia, E. (2008) · ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) · doi:10.1115/smasis2008-661 · Cited by 3 · cited 1×
“Experimental measurements of the available energy and forces as a result of the flapping motion of insect flight showed that about 40 mW of muscle energy is available and half to one-third of the mass of the insect can be loaded on the insect without affecting the stability of flapping [417].”
BackgroundUnobtrusive User Verification using Piezoelectric Energy Harvesting
Ma, D., Lan, G., Xu, W., Hassan, M., & Hu, W. S. (2017) · EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services (MobiQuitous) · doi:10.1145/3144457.3144510 · Cited by 3
Safaei, M., Ponder, R. I., & Anton, S. R. (2018) · Active and Passive Smart Structures and Integrated Systems · doi:10.1117/12.2296250 · Cited by 2 · cited 2×
“An improved design of an instrumented knee bearing with six embedded piezoelectrics was proposed by the same group in order to measure compartmental forces and contact locations (figure 13(b)) [405].”
BackgroundMethodSelf-citation
Research works printed but not linked: 1
- Abrol, 2017, Harvesting piezoelectricity using different structures by utilizing fluid flow interactions, Int. J. R&D Eng. Sci. Manag., 5, 24
Cited by
Sorted by citations
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 940
A Review of Piezoelectric PVDF Film by Electrospinning and Its Applications
Kalimuldina, G., Turdakyn, N., Abay, I., Medeubayev, A., Nurpeissova, A., Adair, D., & Bakenov, Z. (2020) · Sensors · doi:10.3390/s20185214 · Cited by 442
“However, microelectronic devices require such lately developing energy harvesting technologies [5,6].”
Piezoelectric nanogenerators for personalized healthcare
Deng, W., Zhou, Y., Libanori, A., Chen, G., Yang, W., & Chen, J. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00858g · Cited by 448
Additive Manufacturing of Piezoelectric Materials
Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G. A., Yang, D., & Hu, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005141 · Cited by 379
Power generation for wearable systems
Gao, M., Wang, P., Jiang, L., Wang, B., Yao, Y., Liu, S., Chu, D., Cheng, W., & Lu, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03911j · Cited by 353
Metadata
- Authors
- Safaei, M., Sodano, H. A., & Anton, S. R.
- Affiliations
- Tennessee Technological University (US)
- University of Michigan (US)
- Corresponding author
- Anton, Steven R
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2019-10-22
- Volume
- 28
- Issue
- 11
- Pages
- 113001
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2966362568
- Cited by
- 874
- References
- 477
- Citations by year
- 2026: 70 · 2025: 122 · 2024: 141 · 2023: 159 · 2022: 151 · 2021: 137 · 2020: 87 · 2019: 7
- FWCI
- 53.71
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Smart Materials and Structures (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
- Keywords
- piezoelectric energy harvesting, vibration energy harvesting, piezoelectric transducers, electromechanical coupling, low-power devices, battery-free power, piezoelectric materials, analytical model, ambient energy, biomedical implants
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
