CoChat

The high temperature flow behavior of additively manufactured Inconel 625 superalloy

Abedi, H R, Hanzaki, A Zarei, Azami, M, Kahnooji, M, Rahmatabadi, D · 2019 · Materials Research Express

The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.

Abstract

The combination of Inconel material properties and the geometric freedom of additive manufacturing provides special opportunity for the production of engineered structures with exceptional strength and stability at elevated temperatures. The present work deals with the high temperature flow behavior of an additively manufactured Inconel 625 superalloy in a wide temperature range of 800 °C–1100 °C under the various strain rates of 0.001, 0.01, and 0.1 s −1 . The strain hardening rate analysis was utilized to reveal the critical condition for the occurrence of the restoration processes. The additively manufactured material was capable to be dynamically recrystallized at various thermomechanical conditions. In this regard, the effect of the Zener–Hollomon parameter (Z) on the characteristic points of the flow curves (critical, peak and steady state stresses and strains) was studied using the power law relations. A phenomenological hyperbolic sine constitutive model was proposed to predict the high temperature flow behavior of the manufactured material; and the model was modified considering the effect of imposed strain. Interestingly, the flow stress levels and the average hot deformation activation energy for the additively manufactured Inconel 625 alloy were found to be lower than that for the same alloy which have been fabricated through hot forging. This was attributed to the complex alloy composition and the specified solidified microstructure of the additively manufactured materials.

Overview

Integrity signals

Registry

Crossref · 10.1088/2053-1591/ab44f6

Cites

38 of 38 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 38 references

Research works printed but not linked: 1

  1. 10.1016/j.matdes.2016.08.078 · DOI

Cited by

See all 63

Metadata

Authors
Abedi, H. R., Hanzaki, A. Z., Azami, M., Kahnooji, M., & Rahmatabadi, D.
Affiliations
University of Tehran (IR)
Corresponding author
Abedi, H R
Venue
Materials Research Express
Published
2019-09-25
Volume
6
Issue
11
Pages
116514
ISSN
2053-1591 (ISSN-L)
OpenAlex
W2973846890
Cited by
63
References
38
Citations by year
2026: 4 · 2025: 7 · 2024: 18 · 2023: 19 · 2022: 5 · 2021: 7 · 2020: 3
FWCI
2.21
Type
journal article
Language
en
Open access
closed
Licence
Locations
Materials Research Express (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanics of Materials › Metallurgy and Material Forming
  • Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
  • Physical Sciences › Engineering › Mechanics of Materials › High-Velocity Impact and Material Behavior
Keywords
Inconel 625, nickel-based superalloy, additive manufacturing, high-temperature flow behavior, high-temperature deformation, strain hardening, dynamic recrystallization, Zener-Hollomon parameter, hyperbolic sine constitutive model, flow stress, activation energy, strain rate sensitivity, solidification microstructure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The high temperature flow behavior of additively manufactured Inconel 625 superalloy. https://app.cochat.ai/papers/10.1088/2053-1591/ab44f6
The paper
Abedi, H. R., Hanzaki, A. Z., Azami, M., Kahnooji, M., & Rahmatabadi, D. (2019). The high temperature flow behavior of additively manufactured Inconel 625 superalloy. Materials Research Express. https://doi.org/10.1088/2053-1591/ab44f6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.