CoChat

Integrated photonic devices in single crystal diamond

Open access
Mi, Sichen, Kiss, Marcell, Graziosi, Teodoro, Quack, Niels · 2020 · Journal of Physics: Photonics

The DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.

Abstract

The field of diamond photonics is reviewed, with a focus on recent experimental demonstrations of photonic integrated devices in a single crystal diamond. This field leverages the outstanding material properties of diamond with the aim to establish large-scale integrated photonics for applications in sensing, information and communication technologies, and optomechanics. Accordingly, this review introduces recent progress in scalable micro- and nano-fabrication techniques for single crystal diamond photonic integrated devices, and provides quantitative comparative evaluation of the performance of the state of the art devices. The review concludes with an outlook of the potential of photonic integrated circuits in single crystal diamond.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1088/2515-7647/aba171

Cites

261 of 261 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Figure 3 Typical fabrication techniques for integrated diamond photonics. (a) Typical diamond-on-insulator structures. A thin diamond membrane is formed on or attached to an insulating layer, typically SiO2, which is then patterned into devices using lithography and dry etching [64]. (b) ' ' Angled etching ' ' via a Faraday cage produces undercut if combined an initial vertical etching, enabling free standing structures with a triangular cross-section [65]. (c) Quasi-isotropic etching uses an unbiased oxygen plasma for crystal plane selective etching, enabling undercuts similarly to the SCREAM process in silicon [66].
Figure 3 Typical fabrication techniques for integrated diamond photonics. (a) Typical diamond-on-insulator structures. A thin diamond membrane is formed on or attached to an insulating layer, typically SiO2, which is then patterned into devices using lithography and dry etching [64]. (b) ' ' Angled etching ' ' via a Faraday cage produces undercut if combined an initial vertical etching, enabling free standing structures with a triangular cross-section [65]. (c) Quasi-isotropic etching uses an unbiased oxygen plasma for crystal plane selective etching, enabling undercuts similarly to the SCREAM process in silicon [66].CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Figure 5 Racetrack cavity fabricated on a diamond-on-insulator (DOI) substrate, coupled to a waveguide which is extended by SU-8 resist to the edge of carrier substrate [164]. Grating couplers on DOI substrate operating at a central wavelength of 1550 nm [156]. SEM and optical images of suspended diamond waveguide taper fabricated with angled-etching method [165]. Second-order grating coupler on DOI waveguide [161]. Notch and inversely designed vertical coupler for quasi-isotropic etch platform [166].
Figure 5 Racetrack cavity fabricated on a diamond-on-insulator (DOI) substrate, coupled to a waveguide which is extended by SU-8 resist to the edge of carrier substrate [164]. Grating couplers on DOI substrate operating at a central wavelength of 1550 nm [156]. SEM and optical images of suspended diamond waveguide taper fabricated with angled-etching method [165]. Second-order grating coupler on DOI waveguide [161]. Notch and inversely designed vertical coupler for quasi-isotropic etch platform [166].CC-BY · From the PDF
Figure 6 Microresonators fabricated in bulk single crystal diamond. Photonic crystal beam [168] and microdisk resonators [97] structured by focused ion beam milling. Racetrack resonator by angled etch [52]. Microdisk [66], 2D photonic crystal [173], and 1D photonic crystal beam fabricated by quasi-isotropic etching [166].
Figure 6 Microresonators fabricated in bulk single crystal diamond. Photonic crystal beam [168] and microdisk resonators [97] structured by focused ion beam milling. Racetrack resonator by angled etch [52]. Microdisk [66], 2D photonic crystal [173], and 1D photonic crystal beam fabricated by quasi-isotropic etching [166].CC-BY · From the PDF
Figure 7 Single crystal diamond resonators fabricated in thin film diamond. Microrings coupled to waveguides [155]. 2D photonic crystal cavity in a heteroepitaxially grown single crystal diamond thin film [174]. Photonic circuits, including microring resonators [159]. Single crystal diamond thin film on top of silicon waveguides and microring resonators (adapted from [70]).
Figure 7 Single crystal diamond resonators fabricated in thin film diamond. Microrings coupled to waveguides [155]. 2D photonic crystal cavity in a heteroepitaxially grown single crystal diamond thin film [174]. Photonic circuits, including microring resonators [159]. Single crystal diamond thin film on top of silicon waveguides and microring resonators (adapted from [70]).CC-BY · From the PDF
Figure 8 Optomechanical resonators in single crystal diamond. Photonic crystal beam fabricated with the angled etching technique [178]. Single crystal microdisk fabricated in a bulk substrate using a quasi-isotropic undercut. [179].
Figure 8 Optomechanical resonators in single crystal diamond. Photonic crystal beam fabricated with the angled etching technique [178]. Single crystal microdisk fabricated in a bulk substrate using a quasi-isotropic undercut. [179].CC-BY · From the PDF
Figure 9 (a) Spectral tuning of GeV centers enabled by strain engineering [189]; (b) Electrical tuning of NV center by Stark effect [28]; (c) SNSPD integrated on SCD waveguide; (d) Emission spectra from diamond LED with dislocation defects, H3 centers and NV 0 centers, covering whole visible range [190].
Figure 9 (a) Spectral tuning of GeV centers enabled by strain engineering [189]; (b) Electrical tuning of NV center by Stark effect [28]; (c) SNSPD integrated on SCD waveguide; (d) Emission spectra from diamond LED with dislocation defects, H3 centers and NV 0 centers, covering whole visible range [190].CC-BY · From the PDF
Figure 10 Left: SCD waveguides characterized by propagation loss and wavelength. Right: coupling devices characterized by insertion loss, bandwidth and wavelength. Bandwidth is not always reported specifically, and where applicable, has been extracted from reported transmission spectra. In reference [5] no data is available therefore no horizontal bar is presented here. DOI: diamond-on-insulator. BK: bulk. DW: direct writing. TW: tapered waveguide. IDC: inversely designed coupler. BC: butt-coupling. GC: grating coupler.
Figure 10 Left: SCD waveguides characterized by propagation loss and wavelength. Right: coupling devices characterized by insertion loss, bandwidth and wavelength. Bandwidth is not always reported specifically, and where applicable, has been extracted from reported transmission spectra. In reference [5] no data is available therefore no horizontal bar is presented here. DOI: diamond-on-insulator. BK: bulk. DW: direct writing. TW: tapered waveguide. IDC: inversely designed coupler. BC: butt-coupling. GC: grating coupler.CC-BY · From the PDF
Figure 11 Left: Reported Q -factors of diamond optical resonators grouped by fabrication technique. The shape of the marker indicates resonator type, while the colour indicates the wavelength of operation. When multiple values were reported, the highest value was chosen. DOI ~ diamond-on-insulator, PC ~ photonic crystal. Right: Qf -product plot of diamond optomechanical resonators. The colors indicate the fabrication method used (Quasi ~ quasi-isotropic etch, Angled ~ angled etch ), while the shape represents the characterization conditions. The reported values of devices fabricated starting from thin membranes (green) are relative to mechanical oscillators (cantilevers), and no optical cavity is present. The light grey lines indicated constant Qf values for every order of magnitude, while the magenta line shows the Qf -product corresponding to room temperature kBT value (~ 6 × 10 12 ).
Figure 11 Left: Reported Q -factors of diamond optical resonators grouped by fabrication technique. The shape of the marker indicates resonator type, while the colour indicates the wavelength of operation. When multiple values were reported, the highest value was chosen. DOI ~ diamond-on-insulator, PC ~ photonic crystal. Right: Qf -product plot of diamond optomechanical resonators. The colors indicate the fabrication method used (Quasi ~ quasi-isotropic etch, Angled ~ angled etch ), while the shape represents the characterization conditions. The reported values of devices fabricated starting from thin membranes (green) are relative to mechanical oscillators (cantilevers), and no optical cavity is present. The light grey lines indicated constant Qf values for every order of magnitude, while the magenta line shows the Qf -product corresponding to room temperature kBT value (~ 6 × 10 12 ).CC-BY · From the PDF
Figure 12 Typical performance of SNSPD on diamond [232]. OCDE increase with nanowire length and operating current. NEP reaches minimum in the mid-biasing region.
Figure 12 Typical performance of SNSPD on diamond [232]. OCDE increase with nanowire length and operating current. NEP reaches minimum in the mid-biasing region.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 261 references

Research works printed but not linked: 28

  1. Balmer, 2009, J. Phys.: Condens. Matter., 21
  2. Schreck, 2017, Sci. Rep., 7
  3. Xie, 2018, Adv. Mater., 30
  4. Rajput, 2015, Chapter 3 - FIB Micro-/Nano-fabrication, 61
  5. Schwartz, 2012, New J. Phys., 14
  6. Liu, 2013, Opt. Express, 21
  7. Stephen, 2018, Phys. Rev. Appl., 12
  8. Rabeau, 2005, Appl. Phys. Lett., 86
  9. Orwa, 2010, J. Appl. Phys., 107
  10. Pham, 2012, Phys. Rev. B, 86, (R)
  11. Lee, 2014, Appl. Phys. Lett., 105
  12. D’Haenens-Johansson, 2011, Phys. Rev. B, 84
  13. Gao, 2018, IEEE J. Sel. Top. Quantum Electron., 24, 1, 10.1109/JSTQE.2018.2806079 · DOI
  14. Latawiec, 2015, Optica, 2, 924, 10.1364/OPTICA.2.000924 · DOI
  15. Shams-Ansari, 2019, arXiv:1906.08830 · arXiv
  16. Wan, 2018, Appl. Phys. Lett., 112
  17. Soltani, 2016, Opt. Express, 24
  18. Faraon, 2011, Nat. Photon., 5, 301, 10.1038/nphoton.2011.52 · DOI · Paper page
  19. Takeuchi, 2001, Phys. Rev. B, 63
  20. Chang, 2018, Appl. Phys. Lett., 112
  21. Atikian, 2017, SPIE Newsroom
  22. Rath, 2015, Sci. Appl., 4, e338–e338
  23. Wang, 2018, J. Opt., 20
  24. Wolf, 2018, Opt. Express, 26
  25. Bray, 2018, Nanoscale, 10, 4028, 10.1039/C7NR09097H · DOI
  26. Wu, 2018, Phys. Rev. Mater., 2
  27. Akhlaghi, 2012, Opt. Express, 20
  28. Charaev, 2019, IEEE Trans. Appl. Supercond., 29, 1

Cited by

See all 53

Metadata

Authors
Mi, S., Kiss, M., Graziosi, T., & Quack, N.
Affiliations
École Polytechnique Fédérale de Lausanne (CH)
Corresponding author
Quack, Niels
Venue
Journal of Physics: Photonics
Published
2020-08-03
Volume
2
Issue
4
Pages
042001
ISSN
2515-7647 (ISSN-L)
OpenAlex
W3039922427
Cited by
53
References
260
Citations by year
2026: 2 · 2025: 13 · 2024: 10 · 2023: 6 · 2022: 10 · 2021: 11 · 2020: 1
FWCI
2.72
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of Physics Photonics (publishedVersion, cc-by)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
Funders
Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (183717)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
Keywords
diamond photonics, single-crystal diamond, photonic integrated circuits, optomechanics, integrated photonic devices, diamond waveguides, diamond sensors, optical communication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Integrated photonic devices in single crystal diamond. https://app.cochat.ai/papers/10.1088/2515-7647/aba171
The paper
Mi, S., Kiss, M., Graziosi, T., & Quack, N. (2020). Integrated photonic devices in single crystal diamond. Journal of Physics: Photonics. https://doi.org/10.1088/2515-7647/aba171

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.