Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 70 of the 76 references it cites were found in a registry or an index; 6 of the 25 sources its claims cite were checked for support.

Integrated silicon photonic MEMS

Open access

Abstract

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and quantum information processing. The success of silicon photonics has been enabled by the unique combination of performance, high yield, and high-volume capacity that can only be achieved by standardizing manufacturing technology. Today, standardized silicon photonics technology platforms implemented by foundries provide access to optimized library components, including low-loss optical routing, fast modulation, continuous tuning, high-speed germanium photodiodes, and high-efficiency optical and electrical interfaces. However, silicon's relatively weak electro-optic effects result in modulators with a significant footprint and thermo-optic tuning devices that require high power consumption, which are substantial impediments for very large-scale integration in silicon photonics. Microelectromechanical systems (MEMS) technology can enhance silicon photonics with building blocks that are compact, low-loss, broadband, fast and require very low power consumption. Here, we introduce a silicon photonic MEMS platform consisting of high-performance nano-opto-electromechanical devices fully integrated alongside standard silicon photonics foundry components, with wafer-level sealing for long-term reliability, flip-chip bonding to redistribution interposers, and fibre-array attachment for high port count optical and electrical interfacing. Our experimental demonstration of fundamental silicon photonic MEMS circuit elements, including power couplers, phase shifters and wavelength-division multiplexing devices using standardized technology lifts previous impediments to enable scaling to very large photonic integrated circuits for applications in telecommunications, neuromorphic computing, sensing, programmable photonics, and quantum computing.

Overview

CoChat Summary

## TL;DR

The paper introduces a silicon photonic MEMS platform integrated into IMEC’s iSiPP50G foundry process, combining MEMS actuators with standard silicon photonic components plus wafer-level hermetic sealing and scalable packaging. The authors experimentally demonstrate tunable couplers/switches, phase shifters, and wavelength-selective filters with low loss, low power, and sub-microsecond response.

## Key findings

  • A vertically actuated tunable power coupler achieved full power transfer with ~300 nm out-of-plane displacement; the compact version had a footprint of 20 µm × 30 µm, 0.5 dB insertion loss at 1550 nm, >35 nm spectral bandwidth, and about 25 dB extinction ratio.
  • An in-plane single-pole double-throw switch reached an extinction ratio of approximately 23 dB over 1510–1580 nm, a response time of 0.73 µs (IDLE to ON1) and 0.82 µs (ON1 to IDLE), with extracted insertion loss <0.5 dB at 1550 nm.
  • The phase shifter produced (2.9π ± π) phase shift at 1550 nm, with device footprint 100 × 45 µm² and an f−3 dB bandwidth of 1.03 MHz in air; a tunable-basis-unit/ring implementation showed a tunable extinction ratio from 0 to 36 dB.
  • The tunable add-drop filter showed 20.4 dB port extinction ratio at resonance, >50 dB drop-port isolation off resonance, 1 nm resonance linewidth in the ON state, and after actuation at 27 V a linewidth of 0.26 nm with quality factor 5969.
  • Optical crossings were optimized to <0.1 dB per crossing for an MMI length of 14.8 µm; optical transitions were improved by waveguide-core width, with wider cores giving lower insertion loss.
  • Wafer-level hermetic sealing used 25 µm silicon caps and achieved a 90% vacuum sealing yield on 672 cavities; sealed phase shifters remained functional and their mechanical Q increased from 8 to 36.

## Methods

  • The platform builds on IMEC’s iSiPP50G silicon photonics foundry process on 200 mm wafers, then uses postprocessing to release MEMS structures by selectively removing buried oxide and forming electrostatic actuators.
  • Device design used finite element modelling for MEMS and finite-difference time-domain solvers for photonics; characterization used tunable lasers and power measurements across wavelength and actuation-voltage sweeps.
  • Packaging included wafer-level hermetic sealing by thermocompression bonding, flip-chip bonding to glass interposers, and fibre-array attachment for high-count optical/electrical interfaces.

## Limitations

  • The paper states a trade-off between response time and actuation voltage: stiffer suspensions can speed response, but they increase voltage requirements.
  • The authors note the current platform can already support about 10³ electrical and 10² optical interfaces, but further scaling would require additional integration approaches such as direct flip-chip bonding of electronic ICs or multicore fibres; this is a stated scaling boundary.
  • Evident from the text: several results are reported as demonstrations on representative devices rather than full system-level validation, so broader circuit-level performance and long-term reliability beyond the sealing demonstration are not comprehensively established here.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41378-023-00498-z

Cites

70 of 70 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Representative examples of recently demonstrated silicon photonic MEMS. Individual components based on dedicated processes on silicon-on-insulator wafers include a tunable couplers44, b phase shifters42, and c ultrasound sensors50, and silicon photonic MEMS based on specifically developed microfabrication processes using multiple layers have shown d beam steering for 3D imaging41 and e, f large-scale photonic switch matrices for optical circuit switching in datacentres40,46. (Permissions: a Adapted with permission from ref. 44 © The Optical Society. b Adapted with permission from ref. 42 © The Optical Society. c Adapted with permission from ref. 50 © Springer Nature. d Adapted from ref. 41 under creative commons license CC BY 4.0. e Adapted with permission from ref. 40 © The Optical Society. f Adapted from ref. 46 under creative commons license CC BY 4.0)
Fig. 1 Representative examples of recently demonstrated silicon photonic MEMS. Individual components based on dedicated processes on silicon-on-insulator wafers include a tunable couplers44, b phase shifters42, and c ultrasound sensors50, and silicon photonic MEMS based on specifically developed microfabrication processes using multiple layers have shown d beam steering for 3D imaging41 and e, f large-scale photonic switch matrices for optical circuit switching in datacentres40,46. (Permissions: a Adapted with permission from ref. 44 © The Optical Society. b Adapted with permission from ref. 42 © The Optical Society. c Adapted with permission from ref. 50 © Springer Nature. d Adapted from ref. 41 under creative commons license CC BY 4.0. e Adapted with permission from ref. 40 © The Optical Society. f Adapted from ref. 46 under creative commons license CC BY 4.0)CC BY · PubMed Central
Fig. 2 Integrated silicon photonic MEMS technology platform. The platform is based on IMEC’s iSiPP50G platform52, enhanced with custom postprocessing to produce suspended and movable MEMS structures alongside the platform’s standard components and with sealing caps above the MEMS structures to provide protection of the movable MEMS devices. a Schematic cross section of the technology platform and 3D perspective views of b in-plane and c out-of-plane movable devices to visualize conceptually the electrostatic actuators, the optical and electrical routing, as well as grating coupler and metal contact pads, serving as interfaces. d Photograph of a 200 mm silicon photonics wafer before MEMS release postprocessing and e microscope recording of a representative MEMS device integrated alongside high-performance grating couplers, low-loss waveguides for optical routing, and two metal levels for electrical routing. The final metallization layer serves as a bond pad for wirebonding, as well as an aluminium ring for the wafer-level hermetic sealing process
Fig. 2 Integrated silicon photonic MEMS technology platform. The platform is based on IMEC’s iSiPP50G platform52, enhanced with custom postprocessing to produce suspended and movable MEMS structures alongside the platform’s standard components and with sealing caps above the MEMS structures to provide protection of the movable MEMS devices. a Schematic cross section of the technology platform and 3D perspective views of b in-plane and c out-of-plane movable devices to visualize conceptually the electrostatic actuators, the optical and electrical routing, as well as grating coupler and metal contact pads, serving as interfaces. d Photograph of a 200 mm silicon photonics wafer before MEMS release postprocessing and e microscope recording of a representative MEMS device integrated alongside high-performance grating couplers, low-loss waveguides for optical routing, and two metal levels for electrical routing. The final metallization layer serves as a bond pad for wirebonding, as well as an aluminium ring for the wafer-level hermetic sealing processCC BY · PubMed Central
Fig. 3 Tunable power couplers and switches. a 3-D schematic view of an out-of-plane actuated tunable power coupler indicating the input, through, and drop ports and the actuator. b SEM recording of the released device showing a cleanly suspended and initially well-aligned configuration of the couplers in the unactuated state. c Measurement results for the spectral characteristics of the tunable power coupler under DC actuation showing a maximum extinction ratio of 25 dB between the drop and through ports in the unactuated (0 V) state and a maximum extinction ratio of 30 dB in the actuated (27 V) state. The associated 3-dB bandwidth of this device is >30 nm. d 3-D schematic view of an in-plane actuated photonic 1 × 2 switch with the movable input and two fixed outputs. e SEM recording of the released device showing the curved electrodes, stoppers, and suspended waveguides. f Measurement results for the spectral characteristics of the device in all three functional states: ON1, OFF, and ON2, wherein the extinction ratio is >23 dB for both ON states and the bandwidth is >70 nm59
Fig. 3 Tunable power couplers and switches. a 3-D schematic view of an out-of-plane actuated tunable power coupler indicating the input, through, and drop ports and the actuator. b SEM recording of the released device showing a cleanly suspended and initially well-aligned configuration of the couplers in the unactuated state. c Measurement results for the spectral characteristics of the tunable power coupler under DC actuation showing a maximum extinction ratio of 25 dB between the drop and through ports in the unactuated (0 V) state and a maximum extinction ratio of 30 dB in the actuated (27 V) state. The associated 3-dB bandwidth of this device is >30 nm. d 3-D schematic view of an in-plane actuated photonic 1 × 2 switch with the movable input and two fixed outputs. e SEM recording of the released device showing the curved electrodes, stoppers, and suspended waveguides. f Measurement results for the spectral characteristics of the device in all three functional states: ON1, OFF, and ON2, wherein the extinction ratio is >23 dB for both ON states and the bandwidth is >70 nm59CC BY · PubMed Central
Fig. 4 Tunable phase shifter. a 3-D schematic view of an in-plane actuated phase shifter. b SEM recording of the phase shifter, comprising a suspended waveguide and a comb-drive actuator to tune the modal cross-section of the waveguide by pulling away a 220 nm wide silicon beam attached to the movable shuttle60. c Characterization of the phase shifter within an unbalanced Mach Zehnder interferometer (MZI), displaying an over 2π phase shift and low insertion loss (large extinction ratio). d Extracted phase shift and e insertion loss versus voltage at a wavelength of 1550 nm. Dotted: single device, line: median for N = 10 devices, shaded region: +/−1σ. f Tunable basic unit composed of two MEMS phase shifters, one per arm of a suspended balanced MZI, here configured as an all-pass ring resonator. g Example characterization of the tunable basic unit with two MEMS phase shifters, showing versatile control over the ring filter response and a free spectral range of 0.93 nm at a wavelength of 1550 nm. h Actuation map of the corresponding filter extinction ratio and i resonance tuning at a wavelength of 1550 nm. For low values of the extinction ratio, no resonances were observed, and no resonance shift was extracted
Fig. 4 Tunable phase shifter. a 3-D schematic view of an in-plane actuated phase shifter. b SEM recording of the phase shifter, comprising a suspended waveguide and a comb-drive actuator to tune the modal cross-section of the waveguide by pulling away a 220 nm wide silicon beam attached to the movable shuttle60. c Characterization of the phase shifter within an unbalanced Mach Zehnder interferometer (MZI), displaying an over 2π phase shift and low insertion loss (large extinction ratio). d Extracted phase shift and e insertion loss versus voltage at a wavelength of 1550 nm. Dotted: single device, line: median for N = 10 devices, shaded region: +/−1σ. f Tunable basic unit composed of two MEMS phase shifters, one per arm of a suspended balanced MZI, here configured as an all-pass ring resonator. g Example characterization of the tunable basic unit with two MEMS phase shifters, showing versatile control over the ring filter response and a free spectral range of 0.93 nm at a wavelength of 1550 nm. h Actuation map of the corresponding filter extinction ratio and i resonance tuning at a wavelength of 1550 nm. For low values of the extinction ratio, no resonances were observed, and no resonance shift was extractedCC BY · PubMed Central
Fig. 5 Tunable add-drop filter. a 3-D schematic view of the out-of-plane actuated tunable add-drop filter depicting the resonant-mode behaviour of the engaged filter. b SEM recording of the released device showing the suspended ring and the two well-aligned and suspended bus waveguides on either side. c Measurement results for power transmission to the through and drop ports for both on- and off-resonance wavelengths in the two filter states. When the filter is ON (0 V), the free spectral range (FSR) is ~5 nm, and the port extinction ratio (ER) is 20.4 dB for resonant wavelengths and 13.2 dB for off-resonance wavelengths. Turning OFF the filter (27 V) maintains an ER > 20 dB for resonant wavelengths
Fig. 5 Tunable add-drop filter. a 3-D schematic view of the out-of-plane actuated tunable add-drop filter depicting the resonant-mode behaviour of the engaged filter. b SEM recording of the released device showing the suspended ring and the two well-aligned and suspended bus waveguides on either side. c Measurement results for power transmission to the through and drop ports for both on- and off-resonance wavelengths in the two filter states. When the filter is ON (0 V), the free spectral range (FSR) is ~5 nm, and the port extinction ratio (ER) is 20.4 dB for resonant wavelengths and 13.2 dB for off-resonance wavelengths. Turning OFF the filter (27 V) maintains an ER > 20 dB for resonant wavelengthsCC BY · PubMed Central
Fig. 6 Optical crossings. a Microscope image of a multimode interference (MMI)-based optical waveguide crossing. MMI length (LMMI), trenches along the MMIs for penetration of hydrofluoric acid (HF) and the undercut regions are annotated. b Microscope image showing cascaded crossings to determine the insertion loss of the MMI-based waveguide crossings. c Plot showing the spread of the experimentally extracted insertion loss values over the measured wavelength range for different MMI lengths used for the crossing. The box extends from the lower to upper quartile values, the red dotted line represents the mean, and the light green line indicates the median. Inset shows the 3-D drawing
Fig. 6 Optical crossings. a Microscope image of a multimode interference (MMI)-based optical waveguide crossing. MMI length (LMMI), trenches along the MMIs for penetration of hydrofluoric acid (HF) and the undercut regions are annotated. b Microscope image showing cascaded crossings to determine the insertion loss of the MMI-based waveguide crossings. c Plot showing the spread of the experimentally extracted insertion loss values over the measured wavelength range for different MMI lengths used for the crossing. The box extends from the lower to upper quartile values, the red dotted line represents the mean, and the light green line indicates the median. Inset shows the 3-D drawingCC BY · PubMed Central
Fig. 7 Optical transitions. a Scanning electron microscope (SEM) image of an optical transition from the oxide clad region to the cavity where the back end of line stack and the buried oxide have been removed using the developed wafer level postprocessing on the standard silicon photonic platform (iSiPP50G) chip. b Plot showing the spread of the experimentally extracted insertion loss values over the measured wavelength range for different core widths of the shallow etch waveguide-based optical transitions. The box extends from the lower to upper quartile values, the red dotted line represents the mean, and the light green line indicates the median. The inset shows a 3-d representation of the optimized optical transition
Fig. 7 Optical transitions. a Scanning electron microscope (SEM) image of an optical transition from the oxide clad region to the cavity where the back end of line stack and the buried oxide have been removed using the developed wafer level postprocessing on the standard silicon photonic platform (iSiPP50G) chip. b Plot showing the spread of the experimentally extracted insertion loss values over the measured wavelength range for different core widths of the shallow etch waveguide-based optical transitions. The box extends from the lower to upper quartile values, the red dotted line represents the mean, and the light green line indicates the median. The inset shows a 3-d representation of the optimized optical transitionCC BY · PubMed Central
Fig. 8 Wafer-level hermetic sealing. a Hermetically sealed silicon photonic MEMS devices on a 100 mm diameter wafer. The hermetic sealing approach uses wafer bonding for cap transfer and enables versatile shapes and designs of the sealed cavities with surrounding bond pads. b Top SEM and optical microscope images of the transferred caps on top of the hermetically sealed cavities. c Top microscope view of a MEMS phase shifter before wafer bonding and sealing, enclosed by the aluminium ring against which the cap will be bonded. d Successful transmission measurement of a MEMS phase shifter (see section ‘Tunable phase shifter’ above) after sealing and dicing, using an actuation voltage of up to 36 V64
Fig. 8 Wafer-level hermetic sealing. a Hermetically sealed silicon photonic MEMS devices on a 100 mm diameter wafer. The hermetic sealing approach uses wafer bonding for cap transfer and enables versatile shapes and designs of the sealed cavities with surrounding bond pads. b Top SEM and optical microscope images of the transferred caps on top of the hermetically sealed cavities. c Top microscope view of a MEMS phase shifter before wafer bonding and sealing, enclosed by the aluminium ring against which the cap will be bonded. d Successful transmission measurement of a MEMS phase shifter (see section ‘Tunable phase shifter’ above) after sealing and dicing, using an actuation voltage of up to 36 V64CC BY · PubMed Central
Fig. 9 Electronic-photonic assembly. a Schematic cross-section representation and b photograph of the electronic-photonic assembly. c Subassembly of the silicon photonic MEMS die flip-chip bonded to the glass interposer. The assembly consists of the interposer-chip subassembly, attached to a mechanical support by silver epoxy and wirebonded to the printed circuit board with fan-out to high-density connectors, a 72-channel fibre-array attached by index matched epoxy to the PIC, and a metal housing to support the chip-interposer subassembly. d Using active alignment with shunt connectors on the chip allows for low insertion loss fibre-to-chip coupling over the telecom C-band
Fig. 9 Electronic-photonic assembly. a Schematic cross-section representation and b photograph of the electronic-photonic assembly. c Subassembly of the silicon photonic MEMS die flip-chip bonded to the glass interposer. The assembly consists of the interposer-chip subassembly, attached to a mechanical support by silver epoxy and wirebonded to the printed circuit board with fan-out to high-density connectors, a 72-channel fibre-array attached by index matched epoxy to the PIC, and a metal housing to support the chip-interposer subassembly. d Using active alignment with shunt connectors on the chip allows for low insertion loss fibre-to-chip coupling over the telecom C-bandCC BY · PubMed Central
Fig. 10 Silicon photonics chip design. Layout (left) of the full silicon photonics chip provided for fabrication at IMEC. Regions highlighted in green indicate the portions of the chip allocated to the testing of new geometries, functionalities, etc., at the individual device level. The red, yellow, blue, and black regions indicate the positions of four representative large-scale circuits utilizing a large number of individual devices. A microscope image (right) of the chip after fabrication and after custom MEMS postprocessing captures the full layout and scale. The aluminium rings are visible as bright contours, as is the exposed device layer silicon seen in pink inside the MEMS cavities. Note that the dark spots in the image are regions where the integrity of the alumina passivation was locally compromised and the vapour HF etchant could penetrate into the BEOL stack
Fig. 10 Silicon photonics chip design. Layout (left) of the full silicon photonics chip provided for fabrication at IMEC. Regions highlighted in green indicate the portions of the chip allocated to the testing of new geometries, functionalities, etc., at the individual device level. The red, yellow, blue, and black regions indicate the positions of four representative large-scale circuits utilizing a large number of individual devices. A microscope image (right) of the chip after fabrication and after custom MEMS postprocessing captures the full layout and scale. The aluminium rings are visible as bright contours, as is the exposed device layer silicon seen in pink inside the MEMS cavities. Note that the dark spots in the image are regions where the integrity of the alumina passivation was locally compromised and the vapour HF etchant could penetrate into the BEOL stackCC BY · PubMed Central
Fig. 11 Simplified process flow indicating the main steps used in MEMS postprocessing. Step a shows the initial cross-section of the sample after processing at the foundry. The first oxide removal step b clears any remaining oxide on top of and between the waveguides before an alumina passivation layer is conformally deposited over the entire sample using atomic layer deposition (ALD) in step c; this layer serves as a hard mask against the vapour phase hydrofluoric acid (vHF) etchant used to selectively remove the sacrificial buried oxide (BOx) layer. Following passivation, the alumina must be opened up inside the MEMS cavities in step d to provide vHF access to the BOx, as well as over the metallization in step e to ensure proper electrical contact. In a final step f, vHF is used to remove the BOx under the exposed device layer silicon, resulting in free-standing, movable silicon photonic MEMS structures. Arrows serve as visual guides on the locations where the corresponding process step is applied
Fig. 11 Simplified process flow indicating the main steps used in MEMS postprocessing. Step a shows the initial cross-section of the sample after processing at the foundry. The first oxide removal step b clears any remaining oxide on top of and between the waveguides before an alumina passivation layer is conformally deposited over the entire sample using atomic layer deposition (ALD) in step c; this layer serves as a hard mask against the vapour phase hydrofluoric acid (vHF) etchant used to selectively remove the sacrificial buried oxide (BOx) layer. Following passivation, the alumina must be opened up inside the MEMS cavities in step d to provide vHF access to the BOx, as well as over the metallization in step e to ensure proper electrical contact. In a final step f, vHF is used to remove the BOx under the exposed device layer silicon, resulting in free-standing, movable silicon photonic MEMS structures. Arrows serve as visual guides on the locations where the corresponding process step is appliedCC BY · PubMed Central
Fig. 12 Schematic representation of the microfabrication process flow for interposer fabrication. a Starting glass substrate that is cleaned in a piranha bath, b chromium–gold–titanium metal sputtering, c maskless lithography and subsequent ion beam etch (IBE), d sputtering of isolation oxide, e oxide patterning by maskless lithography and buffered-HF liquid etch, and f titanium etch by IBE
Fig. 12 Schematic representation of the microfabrication process flow for interposer fabrication. a Starting glass substrate that is cleaned in a piranha bath, b chromium–gold–titanium metal sputtering, c maskless lithography and subsequent ion beam etch (IBE), d sputtering of isolation oxide, e oxide patterning by maskless lithography and buffered-HF liquid etch, and f titanium etch by IBECC BY · PubMed Central
Fig. 13 Electronic–photonic assembly process. a Flow chart for scalable electrical and optical interfaces by providing gold stud bumps on the PIC (b, c) for flip-chip bonding to a glass interposer with solder-jetted bumps (d, e), and subsequent active alignment (f) and epoxy attach of fibre arrays for the high count of optical interfaces, and finally wirebonding (g) to a printed circuit board (for the final assembly, see Fig. 9 in the main text)
Fig. 13 Electronic–photonic assembly process. a Flow chart for scalable electrical and optical interfaces by providing gold stud bumps on the PIC (b, c) for flip-chip bonding to a glass interposer with solder-jetted bumps (d, e), and subsequent active alignment (f) and epoxy attach of fibre arrays for the high count of optical interfaces, and finally wirebonding (g) to a printed circuit board (for the final assembly, see Fig. 9 in the main text)CC BY · PubMed Central
Fig. 14 Schematic of a typical photonic MEMS test setup used here to characterize the power couplers and add-drop filter. Light with wavelengths between 1460 and 1580 nm is injected into a fibre array from a tunable laser and passes through a polarization controller to ensure propagation of only the TE mode. The fibre array is in turn carefully aligned with on-chip grating couplers using a combination of the 2-axis stage on which the chip rests and the z-control on the fibre array holder. Following the optical alignment procedure, actuation voltages are applied via a set of electronic probe tips whose position can accurately be adjusted using micropositioners. For DC measurements, the actuation voltage comes from a DC power supply connected to a custom-built voltage distribution board, and for transient measurements, this power supply is replaced with a waveform generator. Optical power measurements are recorded using the integrated photodetectors, which are connected to other fibres in the fibre array. If the signal should be observed in the time domain, the photodetector can be connected to an oscilloscope
Fig. 14 Schematic of a typical photonic MEMS test setup used here to characterize the power couplers and add-drop filter. Light with wavelengths between 1460 and 1580 nm is injected into a fibre array from a tunable laser and passes through a polarization controller to ensure propagation of only the TE mode. The fibre array is in turn carefully aligned with on-chip grating couplers using a combination of the 2-axis stage on which the chip rests and the z-control on the fibre array holder. Following the optical alignment procedure, actuation voltages are applied via a set of electronic probe tips whose position can accurately be adjusted using micropositioners. For DC measurements, the actuation voltage comes from a DC power supply connected to a custom-built voltage distribution board, and for transient measurements, this power supply is replaced with a waveform generator. Optical power measurements are recorded using the integrated photodetectors, which are connected to other fibres in the fibre array. If the signal should be observed in the time domain, the photodetector can be connected to an oscilloscopeCC BY · PubMed Central
Fig. 15 Mechanical characterization of double-clamped suspended beams. a 2D deflection map using an optical profilometer (Veeco Wyko NT9300). b Corresponding deflection profile of the different beams and c maximum deflection versus beam length
Fig. 15 Mechanical characterization of double-clamped suspended beams. a 2D deflection map using an optical profilometer (Veeco Wyko NT9300). b Corresponding deflection profile of the different beams and c maximum deflection versus beam lengthCC BY · PubMed Central

Verification

Claims the paper makes

5 Valid · 4 Not valid · 14 Not checked · 85 Own results and interpretations

48 more claims

Create a free account to see all 108 claims and to verify the 7 references still open.

See all claims — free account
  • Probably not a substantial claim. 14
  • It may state two separate claims as one. 45

Create a free account to see these claims.

Citations

Cites

Show all 76 references

Cited by

See all 167

Metadata

Authors
Quack, N., Takabayashi, A. Y., Sattari, H., Edinger, P., Jo, G., Bleiker, S. J., Errando-Herranz, C., Gylfason, K. B., Niklaus, F., Khan, U., Verheyen, P., Mallik, A. K., Lee, J. S., Jezzini, M., Zand, I., Morrissey, P., Antony, C., O’Brien, P., & Bogaerts, W.
Affiliations
  • The University of Sydney (AU)
  • École Polytechnique Fédérale de Lausanne (CH)
  • Swiss Center for Electronics and Microtechnology (Switzerland) (CH)
  • KTH Royal Institute of Technology (SE)
  • Ghent University (BE)
  • IMEC (BE)
  • Tyndall National Institute (IE)
Corresponding author
Quack, Niels
Venue
Microsystems & Nanoengineering
Published
2023-03-20
Volume
9
Issue
1
Pages
27-27
ISSN
2055-7434 (ISSN-L)
OpenAlex
W4327858904
Cited by
167
References
76
Citations by year
2026: 46 · 2025: 59 · 2024: 49 · 2023: 13
FWCI
11.97
Type
journal article
Language
en
Open access
Licence
Locations
  • Microsystems & Nanoengineering (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Ghent University Academic Bibliography (Ghent University) (publishedVersion)
  • Ghent University Academic Bibliography (Ghent University) (submittedVersion, cc-by)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Science Foundation
  • European Commission (780283, H2020)
  • École Polytechnique Fédérale de Lausanne
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (183717)
  • University of Sydney
  • Horizon 2020 Framework Programme (780283)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Mechanical and Optical Resonators
Keywords
silicon photonics, MEMS, phase shifters, wavelength division multiplexing, power coupler, flip-chip bonding, photonic integrated circuits, thermo-optic tuning

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Integrated silicon photonic MEMS. https://app.cochat.ai/papers/10.1038/s41378-023-00498-z
The paper
Quack, N., Takabayashi, A. Y., Sattari, H., Edinger, P., Jo, G., Bleiker, S. J., Errando-Herranz, C., Gylfason, K. B., Niklaus, F., Khan, U., Verheyen, P., Mallik, A. K., Lee, J. S., Jezzini, M., Zand, I., Morrissey, P., Antony, C., O’Brien, P., & Bogaerts, W. (2023). Integrated silicon photonic MEMS. Microsystems & Nanoengineering. https://doi.org/10.1038/s41378-023-00498-z

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.