The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
TECHNOLOGY UPDATE: Development of a gas-phase bioprocess for isoprene-monomer production using metabolic pathway engineering
Abstract
A sustainable production system for isoprene is being developed based on microbial fermentation of renewable sugars (BioIsoprene™). Isoprene is an important commodity chemical used in a wide range of industrial applications, ranging from the production of synthetic rubber for tires and coatings, to use in adhesives and development of specialty elastomers. Current production of isoprene is derived entirely from petrochemical sources. There is an increasing global need for more isoprene and a simultaneous environmental imperative to reduce greenhouse gases, both of which can be achieved by a highefficiency fermentation-based process for polymer-grade isoprene production. The key to such a process is engineering a microbial cell factory that is streamlined in physiology to drive sugar conversion through engineered biosynthetic pathways, to produce isoprene at near theoretical yields. Two biosynthetic isoprenoid pathways being optimized towards this end, and processes delivering >60g/L of isoprene are described. The product produced in the gas-phase is recovered from the fermentation off-gas in a continuous process. Current state-of-the-art technology has resulted in production, recovery, polymerization, and manufacture of tires with the isoprene component produced via fermentation. Continued improvements in both the cell factory and the production process are being actively pursued.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rohmer, M., & Rohmer, M. (1999) · Natural Product Reports · doi:10.1039/a709175c · Cited by 1,193
Lindberg, P., Park, S., & Melis, A. (2010) · Metabolic Engineering · doi:10.1016/j.ymben.2009.10.001 · Cited by 596
Anthony, J. R., Anthony, L. C., Nowroozi, F., Kwon, G., Newman, J. D., & Keasling, J. D. (2009) · Metabolic Engineering · doi:10.1016/j.ymben.2008.07.007 · Cited by 292
Cited by
Green and sustainable manufacture of chemicals from biomass: state of the art
Sheldon, R. A. (2014) · Green Chem. · doi:10.1039/c3gc41935e · Cited by 1,678
Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability
Mika, L. T., Cséfalvay, E., & Németh, Á. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00395 · Cited by 1,320
A comprehensive metabolic map for production of bio-based chemicals
Lee, S. Y., Kim, H. U., Chae, T. U., Cho, J. S., Kim, J. W., Shin, J. H., Kim, D. I., Ko, Y.-S., Jang, W. D., & Jang, Y.-S. (2019) · Nature Catalysis · doi:10.1038/s41929-018-0212-4 · Cited by 607
An overview of biorefinery derived platform chemicals from a cellulose and hemicellulose biorefinery
Takkellapati, S., Li, T., & Gonzalez, M. A. (2018) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-018-1568-5 · Cited by 526
Biorefineries for the production of top building block chemicals and their derivatives
Choi, S., Song, C. W., Shin, J. H., & Lee, S. Y. (2015) · Metabolic Engineering · doi:10.1016/j.ymben.2014.12.007 · Cited by 516
Metadata
- Authors
- Whited, G. M., Feher, F. J., Benko, D. A., Cervin, M. A., Chotani, G. K., McAuliffe, J. C., LaDuca, R. J., Ben-Shoshan, E. A., & Sanford, K. J.
- Venue
- Industrial Biotechnology
- Publisher
- SAGE Publications
- Published
- 2010-06
- Volume
- 6
- Issue
- 3
- Pages
- 152-163
- ISSN
- 1550-9087 (ISSN-L)
- 1931-8421
- OpenAlex
- W1970513834
- Cited by
- 218
- References
- 3
- FWCI
- 4.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.