Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
The primary emphasis of tissue engineering is the design and fabrication of constructs for the replacement of nonfunctional tissue. Because tissue represents a highly organized interplay of cells and extracellular matrix, the fabrication of replacement tissue should mimic this spatial organization. This report details studies evaluating the use of a three-dimensional, direct-write cell deposition system to construct spatially organized viable structures. A direct-write bioassembly system was designed and fabricated to permit layer-by-layer placement of cells and extracellular matrix on a variety of material substrates. Human fibroblasts suspended in polyoxyethylene/polyoxypropylene were coextruded through a positive displacement pen delivery onto a polystyrene slide. After deposition, approximately 60% of the fibroblasts remained viable. Bovine aortic endothelial cells (BAECs) suspended in soluble collagen type I were coextruded via microdispense pen delivery onto the hydrophilic side of flat sheets of polyethylene terephthalate. After deposition with a 25-gauge tip, approximately 86% of the BAECs were viable. When maintained in culture for up to 35 days, the constructs remained viable and maintained their original spatial organization. These results indicate the potential for utilizing a direct-write, three-dimensional bioassembly tool to create viable, patterned tissue-engineered constructs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Morphogenetic roles of classic cadherins
Takeichi, M. (1995) · Current Opinion in Cell Biology · doi:10.1016/0955-0674(95)80102-2 · Cited by 1,450
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Mrksich, M., & Whitesides, G. M. (1996) · Annual Review of Biophysics and Biomolecular Structure · doi:10.1146/annurev.bb.25.060196.000415 · Cited by 850
CELL ADHESION MOLECULES: Implications for a Molecular Histology
Edelman, G. M., & Crossin, K. L. (1991) · Annual Review of Biochemistry · doi:10.1146/annurev.bi.60.070191.001103 · Cited by 705
Creation of long-lasting blood vessels
Koike, N., Fukumura, D., Gralla, O., Au, P., Schechner, J. S., & Jain, R. K. (2004) · Nature · doi:10.1038/428138a · Cited by 701
Vasculogenesis and angiogenesis in embryonic-stem-cell-derived embryoid bodies
Risau, W., Sariola, H., Zerwes, H.-G., Sasse, J., Ekblom, P., Kemler, R., & Doetschman, T. (1988) · Development · doi:10.1242/dev.102.3.471 · Cited by 657
Montesano, R., Orci, L., & Vassalli, P. (1983) · The Journal of cell biology · doi:10.1083/jcb.97.5.1648 · Cited by 647
Capillary endothelial cell cultures: phenotypic modulation by matrix components.
Madri, J. A., & Williams, S. K. (1983) · The Journal of cell biology · doi:10.1083/jcb.97.1.153 · Cited by 612
Self-citation
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Metadata
- Authors
- Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2004-09-01
- Volume
- 10
- Issue
- 9
- Pages
- 1566-1576
- ISSN
- 1076-3279 (ISSN-L)
- OpenAlex
- W2045047041
- Cited by
- 373
- References
- 42
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs. https://app.cochat.ai/papers/10.1089/1076327042500274
- The paper
- Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004). Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs. Tissue Engineering. https://doi.org/10.1089/1076327042500274
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.